Page 2 - Index
Warning .................................................................................................................... 1Contents ................................................................................................................. 2Quick Start .........................................
Page 3 - Canadian Department of Communications Compliance Statement; FCC Information
1 TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USETHIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGSCAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SE...
Page 4 - Your new NEC AccuSync; Contents
2 AccuSync TM 500/700/700M/900 Your new NEC AccuSync ™ monitor box* should contain the following: • AccuSync Monitor with tilt/swivel base• Power Cord• Captive Signal Cable• User’s Manual Contents * Remember to save your original box and packing material to transport or ship the monitor. Power Cord ...
Page 5 - Quick Start; Connecting the Tilt/Swivel stand
3 Quick Start Connecting the Tilt/Swivel stand 1. With the monitor unplugged from your system and the wall outlet, carefully turn the monitor down on a firm table 2. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 3. Insert the hooks into slots.4. Slide t...
Page 6 - –continued; To attach the AccuSync; Troubleshooting
4 Quick Start –continued To attach the AccuSync ™ monitor to your system, follow these instructions: 1. Turn off the power to your computer.2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Plug the end of the video sig...
Page 8 - Controls
6 Controls (AccuSync 500) Control Direct Access Function The Contrast and Brightness functions are also available in theOn Screen Display (OSD) menu. Button Bring up Contrast adjustment Bring up Brightness adjustment Buttons Use these buttons to choose or adjust items inthe on screen display. MENU (...
Page 11 - Microphone Operation; Side Jacks; Rear Panel Jacks
9 Controls –continued (AccuSync 700M) Microphone Operation Using this jack reduces the length of cable needed to reach the PC's sound card. In order to usethe MIC jack, use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into theMIC input jack of your sound card (if available)....
Page 12 - To make adjustments in the On Screen Display, follow these steps:
10 Controls –continued Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe monitor is quick and easy with the On Screen Display Control system. Ashort example is quick and easy given below to familiarize you with the useof the controls. The following secti...
Page 13 - Main menu; To adjust the position of the screen
11 Controls –continued To adjust the brightness andcontrast of the screen BrightnessContrast Main menu Sub menu Reference The following table indicates all the On Screen Display control, adjustment,and setting menus. BRIGHTNESS/ CONTRAST POSITION V PositionH Position SIZE V SizeH Size GEOMETRY TiltS...
Page 14 - OSD Adjust
12 Controls –continued Brightness To adjust the brightness of the screen. Contrast To adjust the contrast of the screen. Vertical Position To move image up and down. Horizontal Position To move image left and right. Vertical Size To adjust image height. Horizontal Size To adjust image width. Tilt To...
Page 17 - Main Menu
15 : Adjustable Controls –continued (AccuSync 700M) Main Menu Description VOLUME TREBLE BASS BALANCE MICROPHONE Raises or lowers audio level. Enables or disables microphone usage. Changes levels of left/right speaker. Raises or lowers bass level. Raises or lowers treble level. VOLUME ON 70 AS5007007...
Page 18 - Recommended Use; Safety Precautions and Maintenance; FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE; CAUTION
16 Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE ACCUSYNC ™ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock haza...
Page 20 - Specifications; Picture Tube
18 Specifications (AccuSync 500) 15 inches (14.0 inches viewable)90 degree deflection0.27mm dot pitchAGAS (Anti-Glare, Anti-Static) coatingHorizontal Freq. 30 - 71kHz (Automatic) Vertical Freq. 55 - 120Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Sub Connector Inpu...
Page 23 - Temperature
21 Specifications –continued (AccuSync 900) 19 inches (18.0 inches viewable)90 degree deflection0.25mm dot pitchARAS (Anti-Reflective, Anti-Static) coatingHorizontal Freq. 30 - 98kHz (Automatic) Vertical Freq. 55 - 160Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Su...
Page 24 - Features
22 Features OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat squaretechnology CRT, a high contrast screen delivers crisp, clean text and graphics. Invar Shadow Mask: Holes in the thin metal she...
Page 25 - • Check connector for bent or pushed-in pins.
23 Troubleshooting No picture • Display card should be completely seated in its slot.• Power Button and computer power switch should be in the ON position.• Signal cable should be completely connected to display card/computer and monitor. • Check connector for bent or pushed-in pins. Image is scroll...
Page 26 - References; NEC-Mitsubishi Monitor Customer Ser vice & Support; Sales Information Line:; Electronic Channels; Product Registration:
24 References NEC-Mitsubishi Monitor Customer Ser vice & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/MacintoshCable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/ css/Ser...
Page 27 - Limited Warranty
25 Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants thisProduct to be free from defects in material and workmanship and, subject to the conditions setforth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unitwhic...
Page 28 - Declaration of the Manufacturer; We hereby certify that the color monitor
26 Declaration of the Manufacturer We hereby certify that the color monitor AccuSync 500 (AS500), AccuSync 700 (AS700), and AccuSync 700M (AS700M) are in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 and marked ...
Page 29 - Informations FCC
27 AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU ÀL’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGEOU AUTRE QUE SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES.NE PAS OUVRIR LE BOÎTIER, LEQUEL C...
Page 30 - Contenu; La boîte de votre nouveau moniteur NEC AccuSync
28 AccuSync TM 500/700/700M/900 Contenu * Ne pas oublier de conserver la boîte et le matériel d'emballage d'origine pourtransporter ou expédier le moniteur. La boîte de votre nouveau moniteur NEC AccuSync MC contient : • Moniteur AccuSync avec socle inclinable/rotatif• Cordon d'alimentation• Câble d...
Page 31 - Mise en marche rapide; Raccorder Socle Inclinable/Rotatif; soigneusement le moniteur sur une table solide.; Déposée Socle Inclinable/Rotatif; Le moniteur étant débranché du système et de la
29 Mise en marche rapide Raccorder Socle Inclinable/Rotatif 1. Le moniteur étant débranché du système et de la prise de courant, renverser soigneusement le moniteur sur une table solide. 2. Alignez les crochets du socle inclinable et pivotant par rapport aux logements correspondants dans la base du ...
Page 32 - –suite; Pour raccorder le moniteur AccuSync; au système, suivre les
30 Mise en marche rapide –suite Figure A.1 Mini-fiche D-SUB à 15 broches Câble d’interface captif Pour raccorder le moniteur AccuSync MC au système, suivre les directives ci-après : 1. Mettre l'ordinateur hors tension.2. Si nécessaire, installer la carte vidéo dans le système. Pour plus d'informatio...
Page 34 - Commandes; Commande
32 Commandes (AccuSync 500) Boutons Ces boutons permettent de sélectionner et paramétrerles éléments du menu affiché. Bouton MENU(ou OSD) Ce bouton permet de faire apparaître et disparaîtrel'affichage du menu à l'écran. Cette diode luminescente est verte lorsque le moniteur est en mode de fonctionne...
Page 37 - Prises latérales; Prises du panneau arrière
35 Commandes –suite (AccuSync 700M) Fonctionnement du microphone A l'aide de cette prise, vous pouvez réduire considérablement la taille du câblenécessaire pour atteindre la carte son du PC. Pour utiliser la prise MIC, connectez lecâble (livré avec l'appareil) à l'arrière du moniteur (MIC OUT) à l'e...
Page 38 - Réglage de l'affichage; Pour effectuer des réglages dans l'OSD, procédez comme suit :
36 Réglage de l'affichage Le réglage de la taille et de la position de l'image ainsi que desparamètres de fonctionnement du moniteur se fait facilement etrapidement à l'aide du système de commande OSD (menu sur écran).Le bref exemple ci-dessous vous permettra de vous familiariser avecces commandes. ...
Page 39 - Menu principal; Moirage V
37 Niveau VidéoLangueHeure OSD InclinaisonCoussin LatéralCoussin BalanceParallélogrammeTrapèzeAngle SupérieurAngle Inférieur Commandes –suite Le tableau ci-dessous détaille les menus de contrôle, de réglage et deparamétrage de l'OSD. Menu principal Sous-menu Référence LUMINOSITÉ/ CONTRASTE POSITION ...
Page 44 - Consignes de sécurité et de maintenance; POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER; Usage recommandé; ATTENTION
42 Consignes de sécurité et de maintenance POUR UN FONCTIONNEMENT OPTIMAL, PRIÈRE DE NOTER CE QUI SUIT POUR LE RÉGLAGE ET L'UTILISATION DU MONITEUR COULEUR AccuSync MC : • NE PAS OUVRIR LE MONITEUR. Aucune pièce intérieure ne nécessite l'intervention de l'utilisateur, et l'ouverture ou la dépose des...
Page 46 - Fiche techniques; Tube cathodique; Environnement
44 Fiche techniques (AccuSync 500) 15 pouces (pour une zone visualisable de 14 pouces)déflection à 90 ° pas de masque de 0,27 mmrevêtement AGAS ( anti-éblouissement et anti-statique ) Fréquence horiz. 30 - 71kHz (Automatique) Fréquence vertic. 55 - 120Hz (Automatique) Forme TTL séparé, Positif/Negat...
Page 50 - Fonctions
48 Fonctions Surface d'écran OptiClear ® : Réduit la réflexion et l'éblouissement et augmente le contraste sans sacrifier le niveau de netteté, la clarté ni la luminosité. Doté de latechnologie TRC d'écran plat carré, un écran à haut contraste avec une taille procure destextes et des graphiques clai...
Page 51 - interférences électriques.
49 Dépannage Pas d'image • La carte vidéo doit être complètement introduite dans sa fente.• La touche d'alimentation et le commutateur d'alimentation de l'ordinateur doivent être en position ON (Marche). • Le câble de signal doit être bien connecté à la carte vidéo /l'ordinateur.• Vérifier si le con...
Page 52 - Références; Ventes et information produit; Ligne d’information sur les ventes:; Courrier électronique; Opérations Européennes:
50 Références Ser vice à la clientèle et assistance technique du moniteur NEC-Mitsubishi Service à la clientèle et assistance technique: (800) 632-4662 Télécopieur: (800) 695-3044 Pièces et accessoires/adaptateurde câble Macintosh: (888) NEC-MITS [888-632-6487] Politiques et processus du serviceà la...
Page 53 - Garantie limitée
51 Garantie limitée NEC-Mitsubishi Electronics Display of America, Inc. (ci-après «NMD-A») garantit que ce produit est exempt de vice de fabrication et de main-d’oeuvre et, selon les conditions énoncées ci-dessous, accepte de réparer ou remplacer, à sa discrétion, toute pièce de l’appareil concerné ...
Page 54 - Déclaration du fabricant; Nous certifions par la présente
52 Déclaration du fabricant Nous certifions par la présente que les moniteurs AccuSync 500 (AS500), AccuSync 700 (AS700), ou AccuSync 700M (AS700M) conformes à la directive 73/23/EEC du Counseil: – EN 60950 la directive 89/336/EEC du Counseil: – EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 et port...
Page 55 - DÉCLARATION DE CONFORMITÉ; Série AccuSync; NEC
53 Avis de propriété exclusive et de dégagement de responsabilité Les informations contenues dans ce document, y compris tous les designs et matériel s'y rapportant, sont la propriété deNEC-Mitsubishi Electronics Display of America et/ou ses concédants. NEC-Mitsubishi Electronics Display of America ...
Page 56 - DECLARATION OF CONFORMITY; NEC AccuSync
54 PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property ofNEC-Mitsubishi Electronics Display of America and/or its licensors, as appropriate, reserve all patent, copyright andother proprietary ri...