Muratec F-320 - Manuals

Power requirements Plug in the power cord Plug the power cord carefully and completely into awall outlet. Do not leave any portion of the electricalcord’s metal plugs exposed. Doing so could cause afire and poses a risk of electrical shock. Do not share an extension cord connector with other plugs I...

Do not put furniture or equipment on the power cord Do not put anything on or over the electrical powercord, and do not route the power cord under rugs orcarpets. Doing so can damage the power cord or fax,and can cause fire or electrical shock. Avoid temperature fluctuations Sudden changes in temper...

These instructions are divided into the following sections. • “Getting started” (page 1.1) describes how to set up your machine, operating tips and some important settings that youshould perform before you use your machine. • “Basic operations” (page 2.1) describes the basic operations of the transm...

Getting started Packaging contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1Parts of your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1Control Panel Overview . . . . . . . . . . . . . . . . . . . . ...

Getting started This chapter describes how toset up your machine, operating tipsand some important settingsbefore you use your machine Packaging contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Parts of your machine . . . . . . . . . ...

1.1 Getting started Packaging contents Included in your machine’s packaging:1. Main unit with 500-sheet paper cassette installed (paper not included)2. Drum cartridge 7. AC power cord 3. Toner cartridge* 8. Operating instructions and Quick reference 4. Document tray 9. Soft Key labels 5. Extension p...

1.3 Getting started 1 Soft Keys — Soft Keys are shortcut keys. If the light above any one of thesekeys glows, that means the setting programmed into that key is active. Youcan assign some functions into these eight keys as you want. (See page 3.15for details.) The following functions are assigned at...

1.5 Getting started Pick an installation spot Where should you install your fax machine? The location should be:• Clean — Dust build-up can damage your fax. (However, do not use a cover!)• In the open — Allow at least 12 inches of clearance around your machine. Be sure that you never cover the machi...

1.6 Getting started 3 Unpack a new toner cartridge from itscarton. Then, holding the toner car-tridge with both hands, slowly shake itto distribute the toner evenly inside thecartridge. Note: Do not touch the roller of the toner cartridge. 4 Gently install the toner cartridge inthe printer, making s...

Plug in and power up 1 Plug one end of the telephone line cord into the LINE jack on the machine’s rear side and the other end into a standard telephone wall jack. 2 Plug the non-pronged end of the AC power cord into the AC power cord jack on the right rear side of the machine and the pronged end in...

Loading paper in paper cassette Before you load paper, note the following:• After you load paper in fax’s cassette, you must “tell” your machine what size paper you loaded: letter-, legal- or half letter-sized.You can do this by the “Setting of the paper size” operation. (See page 1.9.) Note: If you...

1.9 Getting started Setting of the Paper Size Default setting: Ltr (Letter-sized paper)When you change the size of paper in the paper cassette, you must also change thepaper size setting, as shown below. 1 Press MENU , 2, 1, 0, 1, ENTER . The LCD shows: 2 Press or until the recording paper size for ...

1.10 Getting started Symbol and terms In this manual, the following symbols and terms are used, make sure you knowwhat they mean. CAUTION This symbol indicates how to avoid personal injury. Important: This instruction describes conditions or incorrect operations thatcould cause damage to your machin...

1.11 Getting started Searching the functions using the cursor key Even if you don’t remember the exact commands needed for an operation, you cansearch for and enter almost all of your unit’s functions using the MENU key, Cursor key and the ENTER key. Note: You can also search for any function with t...

1.12 Getting started Entering characters Some settings give you a chance to enter characters; for your TTI, remote fax’s nameor others. To enter letters or other characters, use the following guidelines: Using numeric keypad to enter characters You can enter 40 letters, digits or symbols (and space)...

1.13 Getting started Function table Note: Your machine can print a function list. It lists the functions available on your fax machine and the keystrokes needed to complete them. To print a function list, press MENU , 5, 1, 0, 1. Level one function Level two function Level three function Summary of ...

1.18 Getting started EasyStart software is already installed on your Muratec fax machine. It guides youthrough the process of entering the following settings. These settings you make herecan always be changed later. • Language on the LCD and Lists• Current Day and Time• Automatically Daylight saving...

1.19 Getting started 5 Use the numeric keypad to enter the correct date and time, using a MMDDYY format for the date and 24-hour format for the time. For instance, to set 2:30 PM on January 27, 2002, press 0 1 2 7 0 2 1 4 3 0, which results in: Note: Your fax machine automatically inserts the spaces...

Basic Operations This chapter describes the basicoperation of the transmission,reception and copying Sending faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Receiving faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

2.1 Basic operation Guidelines Before you begin the fax sending, please read the following guidelines. Acceptable document sizes You can set up to 80 sheets of letter-sized document in the ADF at one time. However, it’s possible to fax a piece of paper as small as a notepad sheet or one up tothree f...

2.2 Basic operation To change the document mode, press DOCUMENT MODE . The LCD will show: Press or until the mode you want appears. It will toggle Normal, Fine, S-Fine and Gray. Note: You can also toggle them by pressing DOCUMENT MODE repeatedly. Reviewing contrast Setting the contrast allows you to...

2.3 Basic operation Quick memory transmission Using Quick Memory transmission can save you time over standard memory trans-missions.For a normal memory transmission, your fax: (1) scans your entire document intomemory, (2) dials the other fax machine, then (3) transmits the document.But with Quick M...

2.4 Basic operation Sending a fax 1 Insert the document face up, top edge first. Adjust the document guides —by sliding either of them to the left or right — to fit the page(s) you’ll be fax-ing. Your fax machine’s ADF (Automatic Document Feeder) will hold up to 80 pages with letter-sized paper. Whe...

2.5 Basic operation Sending a fax using MONITOR / CALL key or a handset You also can fax a document using either the monitor speaker or the optionalhandset to dial the call. 1 Insert the document to the ADF . If necessary, adjust document mode and con- trast. 2 Obtain a dial tone, either by:• Pressi...

2.6 Basic operation To redial a fax call manually with the MONITOR / CALL key or an optional handset: 1 Make sure the document is in the ADF and that the document mode and con- trast are set. 2 Press MONITOR / CALL or lift the optional handset to get a dial tone. 3 Press ( REDIAL ). The LCD will sho...

2.7 Basic operation 3 If you want to cancel the command shown, press CANCEL . The following two displays will appear alternately: 4 To go ahead with canceling the command, press CANCEL . Go back to step 2 to view other delayed commands. To keep this command but to continue reviewing stored commands,...

2.8 Basic operation 1 Press COMM . CANCEL / CONFIRM . twice. The LCD shows: Note: If you want to go back to the previous display, press COMM . CANCEL / CONFIRM . 2 Press ENTER . The LCD will show the latest fax transaction. 3 Press or until the transaction you want appears. Note: You can print a res...

2.9 Basic operation Answering calls manually In any reception mode, you can always answer calls manually if you have anoptional handset installed. Just pick it up, as you would if using a normal phone. If you hear someone speaking to you, use youroptional handset to speak back. If you hear fax tones...

2.10 Basic operation Tel/Fax Ready mode The Tel/Fax Ready mode is a combination of the Tel Ready and Fax Ready modes. Use it if: • An optional handset is installed on your fax machine and • You’re using the machine as both a telephone and a fax machine In this mode: Your fax machine rings the number...

2.11 Basic operation Guidelines Before you begin making copies, please read the following guidelines. Acceptable document sizes You can set up to 80 sheets of letter-sized document in the ADF at one time. The acceptable document sizes for coping are same as for faxing. Refer to page 2.1. Scanning wi...

2.12 Basic operation Using the bypass tray When you need to use a size of paper not currently loaded in your machine’s papercassette(s), or when you want to use a special type of paper (such as transparencyfilm), use the bypass tray. Important: Your machine automatically selects suitable paper accor...

2.13 Basic operation Your fax machine can also be used as a phone, if you have an optional handsetinstalled. The following is a brief look at the machine’s telephone features. Dialing a telephone number 1 Pick up the optional handset. You will hear a dial tone. 2 Dial the number by the using numeric...

2.14 Basic operation Attaching an optional handset You may purchase an optional handset for your fax machine. Here is how to attachthe handset. 1 Using a Phillips-head screwdriver, attach the handset cradle to the leftside of your machine, using the screws included with the cradle. 2 Plug one end of...

Your fax machine’s autodialer stores your most frequently called phone and faxnumbers for instant recall so you don’t have to remember them. It’s something likean electronic phone book. Autodialer basics How do you autodial? There are two kinds of autodialer numbers. The difference between the two i...

Using one-touch keys Your fax machine stores up to 56 one-touch numbers using the keys marked 01–56. Entering or changing a one-touch number 1 Press MENU , 1, 1, 1, ENTER . The LCD shows the empty one-touch number: Note: If a one-touch number other than 01 appears on the LCD , it means that you have...

Advanced features One-touch fax dialing To dial a fax call using a one-touch number: 1 Place the the document in the ADF . 2 Adjust document mode and contrast if necessary. 3 Press the one-touch key in which you’ve stored the number. What happens next depends on whether you specified memory transmis...

Advanced features Using speed-dial numbers Your fax machine will store up to 144 speed-dial numbers, designated by three-digitidentifier codes from 001 through 144. Entering or changing a speed-dial number 1 Press MENU , 1, 2, 1, ENTER . The LCD shows: Note: If a speed-dial number other than 001 app...

Advanced features Fax dialing via speed-dial To dial a fax call using a speed-dial number: 1 Place the document in the ADF . 2 Adjust document mode and contrast if necessary. 3 Press SPEED DIAL / GROUP once. The LCD shows: 4 Use the numeric keypad to enter the three-digit identifier (such as 018, in...

Advanced features Call group dialing If you frequently send the same fax message to more than one location, store theone-touch key(s) or speed-dial number(s) into a group.After you store, you can send the same fax to many different locations by pressing SPEED DIAL / GROUP . Entering or changing a ca...

Printing a group list Your machine can also print a group list. This lists all your stored autodialer numbersby Location ID and lists the groups to which these numbers belong. The list divides the call groups into four banks, 01–09 (the list shows 00), 10–19 (thelist shows 10), 20–29 (the list shows...

If an EasyDial call fails If an EasyDial call fails, what happens next depends upon the kind of call it was. If it was a fax call … … Your fax machine automatically redials the number according to the redial inter-val you’ve set. It keeps trying until either of the following occurs:• It successfully...

Advanced features The fastest way to fax one document to many recipients is to broadcast it.In an ordinary broadcast, you send the fax as you normally would, except you justadd more fax numbers. You can enter up to 230 numbers:• 30 manually-dialed numbers AND• 200 autodialer numbers OR 1 call group ...

Advanced features Take advantage of lower evening and weekend long-distance rates with delayedtransmission. Your fax machine can store up to 99 delayed commands, each of whichyou can program up to 31 days in advance. Important: If you program all 99 delayed transmission commands, no further memory t...

Advanced features Batch transmission allows you to store multiple documents in an electronic “basket”throughout the day and then fax that entire basket to one location.To do this, just tell the machine when and where the transmission should go. Whenthat date and time arrives, your machine will trans...

Advanced features Printing a list of batch boxes You can easily print a list of your batch boxes. The list includes each box’s identifiernumber, the Location ID , fax number and date/time the transmission should start. To print the list, press MENU , 5, 1, 1, 4, ENTER . Storing a document for batch ...

Advanced features Erasing a document stored in a batch box To erase a document stored in a batch box on your fax machine: 1 Press MENU , 4, 2, 3, ENTER . The LCD shows: 2 Use the numeric keypad to enter the number (1–5) of the batch box storing thedocument you want to erase. 3 Press ENTER . The LCD ...

Advanced features Polling allows someone to fax a document to you without having to make the call orpay for it. There are two kinds of polling:• Regular polling — Your fax retrieves a document from a remote fax machine.• F-Code polling — Your fax retrieves a document stored as a file in the remote f...

Advanced features Soft Keys are shortcut keys. You can assign some functions into these eight keys asyou want. If the light above any one of these keys glows, that means the setting programmed into that key is active. The following functions are assigned at the factory:• Communication cancel / confi...

Advanced features Your fax machine has numerous special features to make your communication easier. We’ll cover them here. Macro keys If you perform the same operation repeatedly, you can automate the operation usinga macro. A macro is a series of the several steps that you group together as a singl...

Advanced features 5 The standby LCD display appears and the machine begins to beep which indi- cates the machine is in the MACRO programming mode. 6 Press the keys exactly as though you were programming a current job. Themachine will beep during programming to confirm MACRO programming mode. Note: Y...

Advanced features 3.18 Storing fax documents with the Macro key To store a fax document for either polling or F-Code polling using a Macro key: 1 Insert the document. 2 Press the Macro key that is programmed for the storing operation you wantto use. 3 Press ENTER , if you have not registered ENTER i...

Advanced features Fax & Copy With the Fax & Copy feature turned on, your machine asks if you want to make acopy of a document each time it transmits that document from memory. Note: The Fax & Copy function cannot be used for real time transmission Note: Quick Memory transmission (see pag...

Advanced features Separate each received document (Separator Page) Your machine has a simple sorting feature. It can separate each received documentby inserting the separator page on the top of the received document.For example, if you use the colored paper for the separator page, it is easy to see ...

Advanced features Entering the cover page message 1 Press MENU , 3, 2, 2, ENTER . The LCD shows: 2 Use the numeric keypad to enter a message for the cover page. (Regardinghow to enter the character, see “Entering character” on page 1.12.) The mes-sage can be up to 40 characters in length. 3 When the...

Advanced features To use DRD on your fax machine: 1 Contact your phone company to make sure it has set up DRD service for you. If possible, also find out which distinctive ring pattern the phone company hasassigned you. 2 Press MENU , 2, 2, 1, 4, ENTER . The LCD shows: 3 Press or until the mode you ...

Responding to a call request If someone requests a call from you during a fax communication, you’ll hear a longring after the receiving machine has received each page. To answer the call request: 1 Lift your machine’s optional handset, and listen for a few seconds. You mayhear a brief series of fax ...

Advanced features 7 Press ENTER . The following two displays will appear alternately: Note: If you want to quit without erasing any document in the bulletin box, press CANCEL . The machine will return to standby mode. Note: If the F-Code box is not storing any documents, the machine briefly displays...

Erasing an empty F-Code box An F-Code box must be empty in order to erase it. (If you select an F-Code box inthese steps which is not empty, the machine beeps. If this happens, print all docu-ments in that box before erasing it.) To erase an empty F-Code box: 1 Press MENU , 3, 5, 2, ENTER . The LCD ...

Programmable one-touch keys Using the power of programmable one-touch keys In order to complete some operations on your machine, you may have to follow sev-eral steps and press several different buttons. But programming your machine’sone-touch keys (57 to 60) can reduce those many steps to a simple ...

Advanced features Programming a broadcast / group Programming a broadcast is very similar to programming a delayed transmission.But instead of sending to just one phone number, you set up multiple numbers forthe transmission.To program a broadcast / group into a programmable one-touch key: 1 Press M...

Advanced features 4 Press ENTER . The LCD shows: 5 Press or until “Communication” appears. 6 Press ENTER . The LCD shows: 7 Press COMM . OPTIONS twice. The LCD shows: 8 Press ENTER . The LCD shows: 9 Use the numeric keypad to enter the number exactly as your machine shoulddial it, including whatever...

Advanced features 10 Press ENTER . The LCD shows: Note: If there isn’t a password for this box, skip to step 12. 11 Use the numeric keypad to enter the appropriate ITU - T password for the box. 12 Press ENTER . The LCD shows: 13 Use the numeric keypad to enter the number exactly as your machine shou...

Advanced features 8 Press ENTER . The LCD shows: 9 Use the numeric keypad to enter the ITU - T sub-address for the box from which you want to poll the document. 10 Press ENTER . The LCD shows: Note: If there isn’t a password for this box, skip to step 12. 11 Use the numeric keypad to enter the appro...

Advanced features 10 Press ENTER . The LCD now asks if you want to make additional settings for this programmable one-touch number. If you do not want to make additional settings, select “Off ” and press ENTER . Then skip to step 12.If you do want to make additional settings, press to select “On” an...

Advanced features Programming a document storage operation You can program the operation for storing following documents into programmableone-touch keys:• Regular polling documents (page 3.14)• F-Code polling documents (page 3.28)If you want to program a programmable one-touch key to store an F-Code...

Advanced features Your machine has a number of security features to keep your private fax documentsprivate, avoid unwanted outside communication and even protect against unautho-rized use of your machine.These security features include:(1) Security reception, (2) PIN mask, (3) Block junk fax, and (4...

Advanced features 8 Press ENTER to save the setting. Note: After setting for activating the security reception, you can assign the secu- rity reception to the Soft key (see page 3.15) to turn it on and off. Turning onthe security reception by pressing a Soft key is not effected the time settingyou e...

Advanced features 2 Use the numeric keypad to enter the four-digit passcode. Note: If you enter an invalid passcode, the machine’s security feature rejects the attempt and returns to standby mode. 3 Press ENTER . The LCD shows: 4 Press or until the mode you want appears. 5 Press ENTER . Autodialing ...

Advanced features If you’ve specified Mode 2 — the machine guides you 1 Enter the phone number as usual. 2 Press START . The LCD shows: 3 Use the numeric keypad to enter the PIN . 4 Press START . Your machine dials the number. Performing batch transmission while using the PIN mask Note: The followin...

Advanced features 2 Press or until the mode you want appears. 3 Press ENTER to save the setting. What you do next depends on what you selected in step 1:• If you selected Off or Mode1, press STOP to return to standby mode. • If you selected either Mode2 or Mode3, go on to step 4. 4 The LCD shows: 5 ...

Advanced features Using department codes You can keep track of how your machine is used through its department code feature.When the department code setting is activated, the machine reminds each user toenter the department code before sending or polling a document. The ActivityJournal then keeps tr...

Advanced features Turning department code protection on and off Important: This feature will work only if you’ve activated the passcode protection (see page 3.42). 1 Press MENU , 3, 3, 1, ENTER . The LCD shows: 2 Use the numeric keypad to enter the four-digit passcode: To change one digit, press to ...

Scan settings Default setting: Primary document mode: Normal, Primary contrast: NormalTwo different settings tell your machine how to scan documents. The initial factorysettings are probably right for most applications, so try using them before changingany of these settings:• Primary document mode —...

Memory transmission Default setting: ON. Note: When the machine’s memory is full, it can transmit only through the docu- ment feeder (real time transmission). To change the default setting of memory transmission: 1 Press MENU , 2, 2, 0, 6, ENTER . The LCD shows: 2 Press or until the mode you want ap...

Print settings You can set three parameters for printing received fax messages:• Print reduction rate• Reduction margin• Paper save functionYou set all three in the same procedure, discussed on next column. Following is aexplanation for each: Print reduction rate Print reduction lets you set the mac...

Setting the number of rings Default setting: 2 times.You can set how many times your fax machine will ring before answering a call.Choose from 1 to 9 rings. 1 Press MENU , 2, 2, 0, 3, ENTER . The LCD shows: 2 Use the numeric keypad to enter the number of rings you want, from 1 to 9. Note: If you ent...

Changing the default settings Changing the dialing pause length Default setting: 2 seconds. The pause is set by the factory to last two seconds, but you can set it to last as longas ten seconds if necessary. To change the pause length: 1 Press MENU , 2, 2, 0, 5, ENTER . The LCD shows: 2 Use the nume...

Scan settings Default setting: Primary document mode: Fine, Primary contrast: NormalTwo different settings tell your machine how to scan documents. The initial factorysettings are probably right for most applications, so try using them before changingany of these settings:• Primary document mode — S...

Changing the default settings Setting the silent mode Default setting: OFF.Silent mode allows you to mute the ringer, the alarm and the key tones.• Ringer Silent — If you turn the ringer off in silent mode, a ring alerts you when you receive fax or voice call and a call request. • Alarm Silent — If ...

Changing the default settings Setting Sleep mode (Energy saving mode) Default setting: On Note: All LED lamps on the control panel will not be off, even when the machine is in the sleep mode. If you want to change the Sleep mode to OFF, you can set it here. 1 Press MENU , 2, 1, 0, 5, ENTER . The LCD...

Changing the default settings 4 Press ENTER to save the setting. The LCD now asks you to select Lower or Upper tray for fax reception. Press or until the tray you want appears. 5 Press ENTER to save the setting. The LCD now asks you to select Lower or Upper tray for list printing. Press or until the...

Just in case … Tips on caring for your machineWhat to do if problems occurGlossary Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Print quality problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Just in case … If an original document jams 1 If an original document jams in the ADF while scanning the document into the memory for faxing or copying, the LCD will show: If you do wish to continue the operation, press ENTER and proceed to step 2. To abort the operation, press CANCEL . This will er...

Just in case … If a printout jams inside your machine Important: Be careful not to put your hand between the top cover and the machine. To clear a printout jammed inside your machine: 1 Open the top cover. 2 Open the printer cover. 3 Remove the toner and drum cartridge. Important: Shield the drum ca...

Just in case … If your machine’s printouts develop quality problems, try to find the example belowthat matches your printout problem. When you find one which is like yours, try thesuggested solutions. If they don’t work, contact your authorized Muratec dealer. Pages are blank • The drum cartridge or...

Just in case … 5.4 Printouts have irregularities • The paper you’re using may have absorbed moisture, per- haps due either to high humidity or water having beenspilled on the paper supply. Toner will not adhere well towet paper.Replace the paper with dry paper and try printing again. Printouts have ...

Just in case … Occasionally, your fax machine encounters some trouble transmitting or receivingdocuments. When it does, it alerts you with an alarm. You can identify the problemwith LCD messages and printed check messages and error reports, explained in the following pages. Alarm Your fax machine so...

Just in case … What you see on the LCD What it means/What to do SecurityRx is Off You tried to turn the security reception ON using a Soft key which is assigned to set the securityreception to ON or OFF , but security reception setting has not set to on.To turn on or off the security reception using...

“Check Message” printouts When there’s a problem with a fax call and your machine detects an error, it pro-duces an error printout headed by the words “Check Message.” This printout liststhe following information about the transmission:• The resulting error code• A communications error message (see ...

With proper installation and a little maintenance, your fax machine should give youdependable service for years to come.Although it requires little day-to-day care, you can take these simple precautions tokeep it in top form:• Always make sure your fax machine is installed according to our specifica...

Just in case … 5 Open the inner cover fully. Important: You must hold the cover open. It won’t stay open by itself. 6 Use the cloth with the rollers cleaner toclean the face of the rollers. Rotate therollers by hand to allow cleaning of theentire roller surface. Cleaning the LED print head If you fi...

Just in case … General questions Q: Where do I add ink or toner to make my fax machine’s printouts darker?A: You can’t adjust the darkness of an incoming fax printout, but you can adjust the darkness of a copy or of a transmission. Insert a document and press CON - TRAST to adjust the contrast setti...

Just in case … Q: Can I transmit a document that’s extra long?A: Yes, if the receiving fax machine is equipped to handle long documents. Many machines have a special setting which allows them to receive documents thatexceed the normal length. Q: Can I transmit a page from a newspaper?A: No. A newspa...

Just in case … Receiving faxes Q: My fax never answers. What’s wrong?A: Check to make sure your fax machine is properly connected to a working AC power outlet and phone jack (see page 1.7). If you’re using a second phone withyour machine, make sure it’s connected properly (page 2.14). Q: Sometimes w...

Just in case … This glossary contains terms you may encounter when discussing or reading about faxmachines. Please use these definitions for reference only. A list of definitions can also befound on the Muratec website at www.muratec.com. 24-hour format — Also called military format. A format for ke...

General Type: Desktop plain paper facsimile Compatibility: ITU-T Group 3 and Super Group 3 Phone system: Public Switched Telephone Network (PSTN) orequivalent Dual access: Multitasking QuadAccess Memory capacity: Standard: 8MB (650 pages* approx.) Upgrade Option: plus 8MB (additional 680 pages* appr...

United States of America Federal Communications Commission ( FCC ) information Ringer Equivalence Number ( REN s): AC REN , 2.2B; DC REN , 0.3. This facsimile machine has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits ...

T his warranty is made by Muratec America, Inc. (hereafter referred to as “Muratec”). This warranty is valid only on Muratec products purchased and used in the United States of America. This warrantyapplies to the product only while owned and used by the original purchaser (“Customer”). If ownership...

A AC power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1AC power switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7Activity journ...