Mitsubishi Electric MSZEF25VE2BKIT - Manuals

Page 2 - WARNING; CAUTION; AFETY PRECAUTIONS; ONTENTS

En-1 ● OPERATING INSTRUCTIONS ● WARNING Do not connect the power cord to an intermediate point, use an ex- tension cord, or connect multiple devices to a single AC outlet. • This may cause overheating, ﬁ re, or electric shock. Make sure the power plug is free of dirt and insert it securely into the ...

Page 3 - For installation; IMPORTANT

En-2 CAUTION Do not step on an unstable bench to operate or clean the unit. • This may cause injury if you fall down. Do not pull the power cord. • This may cause a portion of the core wire to break, which may cause overheating or ﬁ re. Do not charge or disassemble the batteries, and do not throw th...

Page 4 - Installing the remote controller batteries; AME OF EACH PART; Indoor unit; Outdoor unit

En-3 ● OPERATING INSTRUCTIONS ● • Make sure the polarity of the batteries is correct. • Do not use manganese batteries and leaking batteries. The remote controller could malfunction. • Do not use rechargeable batteries. • Replace all batteries with new ones of the same type. • Batteries can be used ...

Page 5 - Emergency operation; ELECTING OPERATION MODES; Operation indicator lamp

En-4 AUTO mode (Auto change over) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is 2°C away from the set temperature for more than 15 minutes. Note: A...

Page 6 - AN SPEED AND; Airflow direction

En-5 ● OPERATING INSTRUCTIONS ● F AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Press to select fan speed. Each press changes fan speed in the following order: • Two short beeps are heard from the indoor unit when set to AUTO. • Use higher fan speed to cool/heat the room quicker. It is recommended to lo...

Page 7 - What is “ECONO COOL”?

En-6 I- SAVE OPERATION 1 Press during COOL, ECONO COOL, or HEAT mode to select i-save mode. 2 Set the temperature, fan speed, and airﬂ ow direction. • The same setting is selected from the next time by simply pressing . • Two settings can be saved. (One for COOL/ECONO COOL, one for HEAT) • Select th...

Page 8 - EEKLY TIMER OPERATION; Setting the weekly timer

En-7 ● OPERATING INSTRUCTIONS ● W EEKLY TIMER OPERATION • A maximum of 4 ON or OFF timers can be set for individual days of the week. • A maximum of 28 ON or OFF timers can be set for a week. Setting the weekly timer * Make sure that the current time and day are set correctly. 1 Press to enter the w...

Page 9 - LEANING; Front panel; What is “Nano platinum fi lter”?

En-8 Instructions: C LEANING • Switch off the power supply or turn off the breaker before cleaning. • Be careful not to touch the metal parts with your hands. • Do not use benzine, thinner, polishing powder, or insecticide. • Use only diluted mild detergents. • Do not expose parts to direct sunlight...

Page 10 - HEN YOU THINK THAT TROUBLE HAS OCCURRED

En-9 ● OPERATING INSTRUCTIONS ● Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer. Symptom Explanation & Check points Indoor Unit The unit cannot be operated. • Is the breaker turned on? • Is the power supply ...

Page 11 - Installation place; Electrical work; NSTALLATION PLACE AND; When using the air conditioner again:; HEN THE AIR CONDITIONER IS NOT

En-10 Installation place Avoid installing the air conditioner in the following places. • Where there is much machine oil. • Salty places such as the seaside. • Where sulﬁ de gas is generated such as a hot spring. • Where oil is splashed or where the area is ﬁ lled with oily smoke. • Where there is h...