Miele WXF660 WCS TDos - Manuals

IMPORTANT SAFETY INSTRUCTIONS  WARNING To reduce the risk of fire, electric shock or injury to persons whileusing your appliance follow basic safety precautions, including thefollowing:  Read all instructions before using the appliance.  GROUNDING INSTRUCTIONS This appliance must be grounded. In ...

IMPORTANT SAFETY INSTRUCTIONS  Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these operatinginstructions.  If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord.  Under c...

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS  Miele tumble dryers and Miele washing machines can be installed as a washer-dryer stack. A Miele washer-dryer stacking kit is requiredas an optional accessory for this. Please ensure that the washer-dryer stacking kit is suitable for the Miele ...

IMPORTANT SAFETY INSTRUCTIONS FCC Radiation Exposure Statement  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should beinstalled and operated with minimum distance 8" (20 cm) betweenthe radiator and your body. Industry Canad...

Guide to the washer 10 Control panel            a Control field The control field consists of a displayand various sensor buttons. Theindividual sensor buttons areexplained in the following sections. b Sensor buttons  The values in the display can bechanged with the  sensor buttons....

Guide to the washer 11 h    sensor button You can specify the degree of soilingof the load in three settings. Thissensor button is only active with theTwinDos option activated. i Start/Add laundry sensor button  The program can be started assoon as the sensor button isflashing on and off. Touching...

Before using for the first time 12  Damage from incorrect installation and connection.Installing and connecting thewashing machine incorrectly willcause serious damage to property.See “Installation”. Removing the protective filmand stickers  Remove: - any protective film from the door- any sticker...

Before using for the first time 13 Miele@home Your washing machine is equippedwith an integrated WiFi module. To use this feature, you will need: - A WiFi network- The Miele@mobile app- A Miele user account. The user account can be created via theMiele@mobile app. The Miele@mobile app will guide you...

Before using for the first time 14 Switching on the washingmachine  Turn the program selector to the Normal program. The welcome tone will sound and thewelcome screen will light up. The display will guide you through the 5 steps of the initial commissioning. 1. Setting the display text You will be ...

Before using for the first time 15 3. Removing the shipping struts  Damage resulting from failure to remove the shipping struts.Failure to remove the shipping strutscan result in damage to the washingmachine and to adjacent cabinetry orappliances.Remove the shipping struts asdescribed in “Installat...

Before using for the first time 16 Settings for compartment   The UltraPhase 1 values are pre-set inthe standard default settings. Agent for  OK       Confirm with the OK  sensor button. Miele UltraPhase 1 OK       Confirm with the OK  sensor button. The following will appear in the di...

Before using for the first time 17  Push the UltraPhase 1 detergent cartridge into compartment 1 until it locks into position. Settings for compartment   The UltraPhase 2 values are pre-set inthe standard default settings.After the cartridge has been pushed in,the display message switches to: Agen...

Before using for the first time 18  Push the UltraPhase 2 detergent cartridge into compartment 2 until it locks into position. When the cartridge is pushed in, themessage in the display changes to:  “TwinDos” set. Can be changed in “Settings”.  Confirm with the OK  sensor control.  Close the Twi...

Caring for the environment 19 Disposal of the packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Ensure that any plastic wrappings, bags,etc. are disposed of safely and kept outof the reach of childr...

Environmentally friendly washing 20 Energy and water consumption - Make use of the maximum load of the respective wash program.The energy and water consumptionwill then be the lowest in relation tothe size of the load. - When smaller amounts of laundry are washed, the washing machine'sautomatic load...

1. Prepare the laundry 21  Empty all pockets.  Damage due to foreign objects. Nails, coins, paper clips, and so oncan cause damage to garments andcomponents in the machine.Check the laundry before washingand remove any such foreign objects. Sort the laundry Only wash items that are labeledmachine ...

2. Selecting a program 22 Switching on the washingmachine  Turn the program selector to aprogram. Program selection There are three possible ways to selecta program: 1. Selecting the standard programswith the program selector dial  Turn the program selector to therequired program. The selected pro...

3. Loading the washing machine 23 Opening the door  Take hold of the door and pull it open. Check the drum for pets or foreignobjects before loading it with laundry. The most efficient use of energy andwater is achieved when a full load iswashed. However, do not overload asthis reduces cleaning eff...

4. Selecting program settings 24 Selecting a temperature/spinspeed You can alter the pre-set temperature/spin speed of a wash program if this ispermitted by the program. The temperatures reached inside thewashing machine might not be thesame as the temperatures selected.Perfect wash results are achi...

4. Selecting program settings 25 Tip: The values will count upward and downward automatically if you keepyour finger on the   sensor buttons. Canceling Delay Start The selected delay-start period can becanceled before the program starts.  Touch the   sensor button. The selected delay-start perio...

5. Adding detergent 26 There are several options for addingdetergent to the washing machine. The washing machine is equipped withthe TwinDos system. TwinDos has to be activated asdescribed in “Before using for the firsttime”. The TwinDos system can only beoperated with the Miele UltraPhase 1and Ultr...

5. Adding detergent 27 Detergent dispenser drawer This washing machine requires highefficiency detergent. Adhere strictly tothe dispensing amounts supplied by thedetergent manufacturer. The detergentsmust be marked with the followinglabel: Ensure that TwinDos dispensing isdeactivated. Filling with d...

5. Adding detergent 28 Adding powder detergent The detergent dispenser drawercontains an insert for liquid detergent inthe   compartment. This insert must be removed to use powder detergent. It is not possible to use powder detergent in the    compartment. A pre-wash cannot be carried outwhen usi...

5. Adding detergent 29 Too little detergent: - The laundry is not cleaned properly and may become gray and hard to thetouch over time. - Can lead to a build-up of bacteria in the washing machine. - Grease is not completely removed from the laundry. - Can lead to limescale deposits on the heater elem...

5. Adding detergent 30  Close the lid and press it firmly shut.  Close the detergent dispenser drawer. The capsule is opened by the act ofinserting it in the detergent dispenserdrawer. The contents can run out ofthe capsule if you then remove itfrom the drawer before it is used.Dispose of opened c...

6. Starting a program 31  Touch the flashing  Start / Add laundry sensor button. The door will lock and the wash programwill start.The program status will appear in thedisplay. The washing machine will keep youupdated on the program status and thetime remaining for the program to run.If a delay-sta...

7. Program end 32 Opening the door and removingthe laundry The door remains locked during theAnti-crease phase. The display willchange to show: End/Anti-Crease  Press Start button  Unlock the door either by touchingthe Start / Add laundry  sensor button or by turning the program selector tothe   ...

Spin cycle 33 Final spin speed Program Selectable spin speeds in words and numbers (rpm) Max  1,6 00 High  1, 2 00 Med  800 Slo w  6 00    0 Normal  – – –   Delicates – –     Sanitize   – –   Handwash –      Dress Shirts – –     Darks/Denims –      Express –      Extr...

Program guide Programs on the program selector Temperature with garment care label symbols Item/Tip Normal Full load (17.6 lb/8 kg) Hot + 140°F/60°C  Cotton, linen, and mixed fibre textiles made ofboth cotton and linen. Hot 120°F/50°C  Warm +  105°F/40°C  Warm 85°F/30°C  Cold Cold USA test prog...

Program guide Temperature with garment care label symbols Item/Tip Dress Shirts Small load (4.4 lb/2 kg) Hot + 140°F/60°C  Pre-treat collars and cuffs depending on thelevel of soiling. Wash silk shirts and blouses in the Silks    program. Hot 120°F/50°C  Warm +  105°F/40°C  Warm 85°F/30°C  Col...

Program guide Temperature with garment care label symbols Item/Tip Outdoor Small load (5.5 lb/2.5 kg) Warm +  105°F/40°C  Performance outerwear (e.g., jackets andtrousers) made from membrane fabric. - Zip up or close any jackets with Velcro before washing. - Do not use fabric softener. - If requir...

Program guide Temperature with garment care label symbols Item/Tip Pillows 2 pillows 16" x 32" (40 x 80 cm) or 1 pillow 32" x 32" (80 x 80 cm) Hot + 140°F/60°C  Synthetic-filled washable pillows - Remove air from the laundry before washing to prevent an excessive build-up of foam. T...

Program guide Settings  /maintenance Settings  You can use the settings to alter the washing machine's electronics to suitchanging requirements. See “Settings” for more detailed information. Maintenance The washing machine has two maintenance programs. 1. Clean Machine for cleaning the washing mac...

Extra options 41 You can supplement the wash programswith extra options. Selecting extra options Extra options are selected or deselectedusing the sensor buttons in the controlfield. Additional extra options can beselected on the display using the Extras sensor button.  Touch the sensor button for ...

Wash program overview – extra options SoftSt eam Pr e -w ash Buzz er Soak Gen tle Allerg o W ash Extr aRinse Normal –     –  Delicates      –  Sanitize        Handwash – –  – – – – Dress Shirts      –  Darks/Denims      –  Express – –  – – – – Extra White       ...

Program sequence Main wash Rinses Spin cycle Water level Wash rhythm Water level Rinses Normal    2-3 1,2  Delicates    2-4 1,2  Sanitize    3-4 1,2  Handwash    2  Dress Shirts    3-4 2  Darks/Denims    3-5 1,2  Express    2  Extra White    2-5 1,2  Outdoor    3-4...

Program sequence 45  = low water level  = medium water level  = high water level  = intensive rhythm  = normal rhythm  = sensitive rhythm  = ultra sensitive rhythm  = handwash rhythm  = carried out – = not carried out This washing machine has fullyelectronic controls with automatic loadcont...

Changing the program sequence 46 Changing a program (safetylock) A program, temperature, spin speed, orselected extra options cannot bechanged once the machine has beensuccessfully started. This prevents themachine being operated unintentionally,e.g., by children. If the washing machine is switched ...

Detergent Detergents recommended by Miele Miele Detergents have been specially designed for day-to-day use in MieleWashing Machines. See “Detergents and care products” for more informationabout these detergents. Miele UltraPhase 1 and 2 Miele Capsules    Normal  –   Delicates    – Sanitize ...

Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation Universal detergent Color detergent Detergent for Woolens and delicates Bleach 1 Normal   –  Delicates – –  – Sanitize   –  Handwash – –  – Dress Shirts   –  Darks/Deni...

Replacing the TwinDos cartridge 49 A message will appear in your washingmachine display if a detergent cartridgeis empty. A message will appear in your washingmachine display if a detergent cartridgeis empty. Preparing the cartridge  Remove the cover cap from thecartridge. or  Remove the film seal...

Cleaning and care 50 Cleaning the housing andcontrol panel  Risk of electric shock. Mains voltage is present when thewashing machine is switched offDisconnect the machine from theelectricity supply before cleaning ormaintenance.  Risk of damage due to ingress of water.The pressure of a water jet c...

Cleaning and care 51 Removing and cleaning the insert forliquid detergents An insert for liquid detergents is locatedin the  compartment of the detergent dispenser drawer.  Remove the insert. Clean the insertthoroughly with warm water. Cleaning the   compartment Compartment 1 has a siphon for be...

Cleaning and care 52 Cleaning the siphon and the  /  compartment channel Liquid starch results in clogging. Thesiphon in the  /  compartment no longer works and the compartmentcan overflow.Clean the siphon particularlythoroughly after using liquid starch afew times. 1. Remove the siphon from the...

Cleaning and care 53 TwinDos maintenance  Damage resulting from dried laundry detergent.If the system has not been used for along time (more than 2 months),detergent in the hoses can becomeviscous or dry out. The hoses canbecome blocked and would thenneed to be cleaned by CustomerService.Clean the ...

Cleaning and care 54 Sanitize info(Cleaning the drum) Washing at low temperatures and/orusing liquid detergents can causebacteria and odors to build up in thewashing machine. Use the Clean Machine program to clean the washing machine. Note the message in thedisplay: Sanitize info: Run a high temp. p...

Frequently asked questions Many malfunctions and faults that can occur in daily operation can be easilyremedied. You can save time and money in many cases, as you do not need tocontact Miele Customer Service.Information to help you rectify faults yourself can be found at www.miele.com/service.The fo...

Frequently asked questions Problem Possible cause and solution  Water intake See Water intake is blocked or restricted.  Check whether the faucet is turned on properly.  Check whether the intake hose is kinked.  Check whether there is sufficient water pressure. The filter in the water intake is...

Frequently asked questions Problem Possible cause and solution  Sanitize info: Run ahigh temp. programor the “Clean Ma-chine” program When washing, a wash program using a temperatureabove 140°F (60°C) has not been run for a long time.  Turn the program selector to  Additional programs /  .  Touc...

Frequently asked questions General problems with the washer Problem Possible cause and solution The washing machine isemitting an odor. The Sanitize info was not observed. When washing, awash program using a temperature above 60°C(140°F) has not been run for a long time.  Run the Clean Machine prog...

Frequently asked questions Problem Possible cause and solution At the end of the pro-gram there is still liquidin the capsule. The small pipe in the detergent dispenser draweronto which the capsule is placed is blocked.  Clean the small pipe. Not a fault.For technical reasons, a small amount of wat...

Frequently asked questions Problem Possible cause and solution White residues whichlook like powder deter-gent are seen on darktextiles after washing. The detergent contained compounds (zeolites) to aidwater softening which are not soluble in water. Thesehave ended up on the laundry.  Try and brush...

Frequently asked questions 62 Opening the door in the eventof a blocked drain outlet and/orpower outage  Turn off the washing machine.  Open the drain pump flap. Blocked drain outlet If the drain outlet is blocked, a largerquantity of water can remain in thewashing machine.  Risk of scalding due ...

Frequently asked questions 63  Clean the drain filter thoroughly.  Remove any foreign objects (e.g.,buttons, coins, etc.) and clean theinterior. Turn the impellers by hand tocheck that they rotate freely.  Replace the drain filter correctly andtighten it securely.  Close the drain pump flap.  R...

Customer Service 64 Information to help you rectify faultsyourself and about Miele spare partscan be found at www.miele.com/service. Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miel...

Installation *INSTALLATION* 65 Front view a Drain hose b Hot-water inlet hose (pressure-proofto 870 psi/6,000 kPa) c Cold-water inlet hose (pressure-proof to 870 psi/6,000 kPa) d Electrical connection e Control panel f Detergent dispenser drawer g Door h Flap for drain filters, drain pump, andemerge...

Installation *INSTALLATION* 66 Rear view a Drain hose b Transport clips for inlet and drainhoses and power cord c Electrical connection d Protruding lid for holding whenmoving the machine e Cold-water inlet hose (pressure-proof to 870 psi/6,000 kPa) f Hot-water inlet hose (pressure-proofto 870 psi/6...

Installation *INSTALLATION* 67 Installation surface A concrete floor is the most suitableinstallation surface for this machine. It isfar less prone to vibration during thespin cycle than wooden floorboards or acarpeted surface.Please note:  The machine must be level andsecurely positioned.  To avo...

Installation *INSTALLATION* 68 Removing the shipping struts Removing the left-hand shipping strut  Open the cover and use the wrenchsupplied with the washing machine toturn the shipping strut 90°.  Pull out the shipping strut. Removing the right-hand shippingstrut  Open the cover and use the wren...

Installation *INSTALLATION* 69 Covering the holes  Risk of injury from sharp edges. There is a risk of injury from reachinginto holes that are not covered.Cover the holes for the shippingstruts after they have been removed.  Press the covers firmly shut until theyclick into place. Securing the shi...

Installation *INSTALLATION* 70 Leveling the machine The washing machine must standperfectly level on all four feet to ensuresafe and proper operation.Incorrect installation may increaseelectric and water consumption andmay cause the machine to move about. Unscrewing and adjusting the feet The four a...

Installation *INSTALLATION* 71 WTV 502  Risk of tipping over due to incorrect washer-dryer stack statics.The washing machine must never bemounted on the tumble dryer. Thiswill impair the statics of the washer-dryer stack.Always use the washing machine asthe base for the washer-dryer stack. Washer-d...

Installation *INSTALLATION* 72 Preparing the stacking kit  Remove the screen from the stackingkit. Set the screen aside. The screen will notbe needed until the end of theinstallation process. 180°  Place the stacking kit upside down ona soft surface, e.g., a blanket.  Stick the 6 sealing rings to...

Installation *INSTALLATION* 73 Aligning the stacking kit  Align the stacking kit centrally on thewashing machine lid.  Use the front edge of the washingmachine lid and the edges of thestacking kit for this purpose. Fastening the stacking kit in place  Use the 6 countersunk screwsincluded with the...

Installation *INSTALLATION* 74 Mounting the tumble dryer on thewasher-dryer stacking kit Placing the tumble dryer on the washingmachine This step must be carried out by 2 people .  Place the tumble dryer on thewasher-dryer stacking kit.  Push the tumble dryer feet all the wayback in the mounting r...

Installation *INSTALLATION* 76 Preparing the stacking kit Leave the cardboard inlay in thedrawer. 180°  Turn the stacking kit upside down.  Stick the sealing rings to theunderside of the stacking kit. 180°  Turn the stacking kit the right way upand place it on the washing machinelid. Aligning the...

Installation *INSTALLATION* 77 Fastening the stacking kit in place  Use the flathead screws supplied tofasten the stacking kit to the washingmachine lid. T20  Carefully tighten the screws by hand.Do not overtighten the screws. Removing the drawer The drawer must be removed from thestacking kit whe...

Installation *INSTALLATION* 78 Preparing the tumble dryer 9/16“ (15mm)  Unscrew the 4 tumble dryer feet. Mounting the tumble dryer on thewasher-dryer stacking kit Placing the tumble dryer on the washingmachine This step must be carried out by 2 people .  Lift the tumble dryer and tilt it backsligh...

Installation *INSTALLATION* 79 Inserting the drawer  Press against the two runners. The runners move out slightly.  Pull the runners all the way out.  Place the drawer on the runners.  Push the drawer into the base. The drawer audibly engages. Tip: Open and close the drawer again to check that i...

Installation *INSTALLATION* 80  Turn the screw to move the drawerfront to the right or left. Additional installationrequirements The washing machine must beinstalled in accordance with therelevant local regulations.  Damage resulting from failure to remove the shipping struts.Failure to remove the...

Installation *INSTALLATION* 81 For closets at room height You can also insert a ventilationopening at the top of the closet. Inaddition, you must provide an openingon the bottom side of the door.  Risk of damage due to overheating of the washing machine.The air supply must not be hinderedby an addi...

Installation *INSTALLATION* 82 Components of the base         a Base b Connecting pieces c Adhesive strips for rear panel d Raised head screws, CEM 4 x 10 e Spacer sleeves f Set screws, M 10 x 40 mm g Rear panel for the base h Installation kit for fastening to thefloor Removing the drawer  ...

Installation *INSTALLATION* 83 Left-hand hinging Installing the connecting pieces The connecting pieces are installed onthe feet of the base. Removing the feet from the base The feet must be removed from thebase in order to mount the connectingpieces.     Using a wrench, turn the counter nut  b...

Installation *INSTALLATION* 84 Preparing the rear panel of theWTS 510  Stick the sealing strips from theaccessory pack to the inside of therear panel as shown in the image. Connecting the washing machine tothe base  Damage to washing machine and floorThe washing machine and the floormay be damaged...

Installation *INSTALLATION* 85  Push the base and the washingmachine together. The set screwsmust be inserted in the holes of thefeet that have been removed from thewashing machine.  Using a wrench, tighten all 4 threaded bolts alternately and evenly inside the base. The base is screwed securely t...

Installation *INSTALLATION* 87 Removing the cover cap  Open the drawer.  There is a cover cap on each side ofthe drawer.  Remove the cover caps by hand. Aligning the drawer vertically On both sides of the drawer is a wheelwhich can be used to adjust the height.Make sure you adjust the height even...

Installation *INSTALLATION* 88  Turn the screw to move the drawerfront to the right or left. Adjusting the inclination of the drawer There are two different types of drawer. 1. Drawer with round rail2. Drawer with square rail Drawer with round rail  Push the top panels outward frominside and set t...

Installation *INSTALLATION* 89  Place the bottom of the panels inposition and press the panels inwardat the top. Drawer with square rail  Slide the two covers back.  To adjust the inclination of the drawer,turn the two rails using a screwdriver. Preparing the washing machine forwashing The follow...

Installation *INSTALLATION* 90 = = During installation, please note thefollowing: - The bases must be the same height.- The bases must be in line with each other. Connecting the bases  Loosen the counter nuts on the feetof the base of the washing machineand the tumble dryer.  Fold out the connecti...

Installation *INSTALLATION* 91 The water protection system The Miele water protection systemprotects all parts of the washingmachine and its surroundings fromwater damage.The system consists of the followingmain components: - the inlet hose- the electronic module and drainage and overflow protection...

Installation *INSTALLATION* 92 Maintenance Only use a genuine Miele hose that hasbeen tested to withstand pressure of atleast 870 psi (6,000 kPa) should youever need a replacement.  A filter is located in the open end of the inlet hose and another in theintake point to protect the inlet valve.Neith...

Installation *INSTALLATION* 93 Electrical connection GROUNDING INSTRUCTIONSThis appliance must be grounded. Inthe event of a malfunction orbreakdown, grounding will reduce therisk of electric shock by providing apath of least resistance for electriccurrent. This appliance is equippedwith a cord havi...

Technical data Height 33 ¹⁄₂" (850 mm) Width 23 ¹⁄₂" (596 mm) Depth 25 ⁵⁄ ₁₆" (636 mm) Depth with door open 41 ¹⁄₂" (1054 mm) Height for building under 33 ¹⁄₂" (+⁵⁄₁₆"/-¹/₁₆") (850 mm) Width for building under 23 ⁵⁄₈" (600 mm) Weight Approx. 220.5 lb (100 kg) Capacity...

Settings 95 You can use the settings to alter thewashing machine's electronics to suitchanging requirements.The settings can be altered at anytime. Calling up settings  Turn the program selector to the Additional programs /   position. Table Linens/Drapes OK      Touch the   sensor buttons ...

Settings 96 TwinDos You can set the type of detergent anddispensing quantities and check the filllevel of the UltraPhase 1 andUltraPhase 2 cartridges. Change dosage The set values for dispensingUltraPhase 1 and UltraPhase 2detergent can be checked andcorrected. Check level The level is displayed wit...

Settings 97 Code The PIN code prevents the washingmachine being used without yourknowledge. Options - Activate When the PIN code has beenactivated, you have to enter it afterswitching the washing machine on.Otherwise, the washing machinecannot be operated.The factory default PIN code is 125. - Chang...

Settings 98 Display switch-off The display and the sensor buttonlighting is switched off to save energy.The Start / Add laundry  sensor button flashes slowly. Options - On (factory default) The lighting switches off after10 minutes. - On (not crnt prog) The lighting remains switched onthroughout the...

Settings 99 Gentle action When Gentle action is activated, drumrotation is reduced. In this way, lightlysoiled items can be washed moregently. Gentle action can be activated for the Normal and Wrinkle-free programs. Gentle action is deactivated asstandard. Temp. reduction At high altitudes, water ha...

Settings 101 SmartGrid The SmartGrid setting is only visible if the Miele@home setting is set up and activated. You can set your washing machine tostart automatically based on anexternal signal within a certain timeperiod. Activating SmartGrid gives the Delay Start sensor button a new function. You ...

Settings 102 Bleach You can activate the automaticaddition of bleach at the end of themain wash. Bleach may only be used in someprograms. See “5. Adding detergent –Using bleach” for more detailedinformation.Activating bleach extends the programduration by approximately 10 minutes.The washing machine...

Detergents and care products 103 Detergent, fabric care products,additives, and machine care productsare available for this washing machine.All the products have been designed forMiele washing machines.These and many other useful productscan be ordered via the Miele onlineshop, from your Miele deale...

Detergents and care products 104 CottonRepair Capsules - Special-purpose detergent for cotton fabrics - Visibly renews fabrics with just one wash - Special Miele formula with Novozymes technology - Removes pilling and renews color intensity and brightness - Depending on fabric do not use more than 1...

9 Independence WayPrinceton, NJ 08540www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre Customer Support Phone: 888-99-MIELE (64353)[e...