Miele PDR 510 ROP [EL] - Manuals

Warning and Safety instructions 6  It is essential to read these instructions. This tumble dryer complies with all current local and national safety requirements. How-ever, inappropriate use can lead to personal injury and damage to property.Read the operating instructions carefully before using th...

Warning and Safety instructions 7  Please supervise children in the vicinity of the tumble dryer and do not let them play with it.  This tumble dryer may also be operated in public areas.  Any uses other than those listed above are prohibited. The manufacturer accepts no liab- ility in such cases...

Warning and Safety instructions 9  The vent ducting must never be installed in any of the following flues or shafts: - Chimneys or smokestacks that are in use.- Shafts that are used to ventilate installation rooms with fireplaces.- Flues that are used by third parties. Smoke or exhaust gas that is ...

Warning and Safety instructions 10  Never operate the tumble dryer without the fluff filter or with a damaged fluff filter. This could lead to malfunctions. Fluff can clog the air channels, heating elements and vent duct-ing, which could result in a fire. In this case, stop the tumble dryer immedia...

Warning and Safety instructions 11 Accessories  Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated.  The tumble dryer can also be combined with a Miele washing machine in a washer-drye...

Description of the machine 12 PDR 510 (electrically heated) 1 2 3 4 6 5 7 8 9 10 a Control panel with rotary control b Door c Fluff filter flap d 4 height-adjustable screw feet e Electrical connection f Communication module slot g Intake vents for drying air h Exhaust duct Ø 100 mm i Connection for ...

Operating the tumble dryer 13 Machines with residual moisture control (ROP) 1 2 3 4 5 6 7 8 9 a Control field b Sensor controls for the drying levels c Status displays     Light up when necessary. d   sensor control Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. be...

Operating the tumble dryer 14 Drying programmes -   position = “ Cottons ” programme For drying cotton and linen fabrics. -   position = “ Cottons   Low temperature ” programme For drying delicate cotton and linen fabrics. -   position = “Synthetics/Delicates” programme For drying synthetic fibr...

Operating the tumble dryer 16 Timed programmes - 5  position = Timed drying : 05 minutes - 10 – 55  position = Timed drying : 10–55 minutes - 60  position = Timed drying : 60 minutes -   position = machine off

Operating the tumble dryer 18 -   position range = “high” temperature setting For drying cotton and linen fabrics. -   position = machine off

Operating the tumble dryer 19 How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected.If a sensor control is dimly lit, this means it can be selected. Sensor c...

Initial commissioning 20  Risk of injury or damage to property due to improper installation. Incorrect installation of the tumble dryer can lead to personal injuryor damage to property.Before commissioning the tumble dryer for the first time, make sureit has been installed.Connect the tumble dryer ...

Drying 21 1. Notes on correct laundry care Washing beforedrying Heavily soiled laundry must be washed particularly thoroughly. Usesufficient detergent and select a high wash temperature. If in doubt,wash the items several times. The tumble dryer must not be used for drying items of laundrywhich have...

Drying 22  Load laundry into the tumble dryer. Risk of damage with laundry getting trapped.Laundry can be damaged by getting trapped when closing the door.When closing the door, make sure that laundry does not get trappedin the door opening. Do not overload the drum. Overloading can cause unnecessa...

Drying 24 4. Starting a programme Starting a pro-gramme  Touch the flashing Start/Stop sensor control. The Start/Stop sensor control will light up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts. Laundry items and f...

Programme overview 25 “Label” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size  Cottons  Cotton items with normalresidual moisture - Machine iron ( 40  %) - Hand iron ( 25  %) - Normal ( 0  %) - Normal plus ( -2  %) - ...

Programme overview 26 “Standard” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size  Cottons Single and multi-layercotton/linen items - Machine iron ( 40  %) - Hand iron ( 25  %) - Normal ( 0  %) - Normal plus ( -2  %) - ...

Changing the programme sequence 27 Changing a programme once it has started You cannot change to another programme once a programme hasstarted (this prevents unintentional alterations). You will need to can-cel the current programme before you can select a new one.  Risk of fire due to incorrect us...

Supervisor level (programming mode) 33 Pro- gramme Designation Possible set value Standard setting Explanation  Pressure sensor       = Off   = Normally open contact   = Normally closed contact  External exhaust flap      = No   = Yes  External exhaust flap delay  ...

Supervisor level (programming mode) 34 Set value in the display Temperature  32 °C/90 °F  33 °C/91 °F  34 °C/93 °F  35 °C/95 °F  36 °C/97 °F  37 °C/99 °F  38 °C/100 °F  39 °C/102 °F  40 °C/104 °F  41 °C/106 °F  42 °C/108 °F  43 °C/109 °F  44 °C/111 °F  45 °C/113 °F  46 ...

Supervisor level (programming mode) 36 Set value in the display Seconds  270 s  275 s  280 s  285 s  290 s  295 s  300 s Pauses Set value Seconds  2 s  3 s  4 s  5 s Quitting programming mode  To quit programming mode, turn the rotary control on the tumble dryer to the   posi...

Connectivity 37 Pairing instructions Follow the steps below to connect the tumble dryer to your network. Opening the Supervisor level  Switch on the appliance by turning the rotary control from the   position to any other po- sition.  Open the door of the tumble dryer.  Press and hold the /  s...

Connectivity 38 Establishing the network connection using a LAN cable The optional XKM 3200 WL PLT communication module is required for wired networkconnection.  On the supervisor level, select   using the   or   arrow buttons.  Then select the COM module   using the   or   arrow buttons...

Cleaning and care 40 Cleaning the fluff filter A two-part fluff filter in the air supply area collects fluff released bytextiles. Remove and dismantle the fluff filter for cleaning. Check and clean the fluff filter at the latest when the Clean out air- ways message appears. Tip: You can also use a v...

Cleaning and care 41 Dismantling thefluff filter Flusensieb reinigen Ein zweiteiliges Flusensieb im Luftfüh-rungsbereich fängt anfallende Flusenauf. Es wird zur Reinigung entnommenund demontiert. , Kontrollieren und reinigen Sie das Flusensieb spätestens bei derPrüfmeldung: Luftwege reinigen . Tipp:...

Cleaning and care 42  Insert the inner fluff filter part into the outer part.  Turn the inner part of the fluff filter clockwise slightly until you feel itengage.  Hold the fluff filter by its handle and push it as far as it will go intothe lower air supply area. Do not rotate the handle as this ...

Cleaning and care 43  Risk of damage due to solvent-based cleaning agents and abras- ive cleaners.Solvent based cleaning agents, abrasive cleaners, glass cleaners orall-purpose cleaners can cause damage to plastic surfaces andother parts.Clean the tumble dryer with a slightly damp cloth and a mild ...

Cleaning and care 44 - Cover in door area Only remove the cover in the door area in the event of a majorblockage. Removing thecover  Look in the drum. – Abdeckung im Einfüllbereich , Die Abdeckung im Einfüllbereich sollten Sie nur im Falle einer extremstarken Verstopfung entnehmen. ^ Schauen Sie in...

Problem solving guide 46 Fault diagnosis Message Cause and remedy The display remains dark. There is no power to the tumble dryer.  Check the mains plug, main switch and fuses (on site). Problem Cause and remedy The efficiency of the tumbledryer decreases. The fluff filter in the tumble dryer is di...

Problem solving guide 47 Problem Cause and remedy  Check and clean all components in the vent ducting (e.g.wall pipe, external grille, bends, elbows, etc.). The flow of air is insufficient (e.g. because it is installed in asmall room).  When drying, open a door or window to ensure sufficientventil...

Customer Service Department 48 Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your MieleDealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitor...

Installation *INSTALLATION* 49 Installation locations Front view Aufstellsituationen Vorderansicht a Abluftanschluss b Netzanschlussleitung c Bedienungsblende d Tür e Flusenfilterklappe f Vier höhenverstellbare Schraubfüße Installation 3 7 a Vent ducting b Electrical connection cable c Control panel...

Installation *INSTALLATION* 50 Rear view 1 2 3 4 5 6 a Electrical connection b Communication module slot c Intake vents for drying air d Exhaust duct Ø 100 mm e Connection for communication box f Communication box (optional)For setting up a connection with external systems View from above Seitenansi...

Installation *INSTALLATION* 51  Risk of injury and damage due to missing tumble dryer fasten- ings.When installing on a plinth, an unsecured tumble dryer can slip andfall off the plinth.If the tumble dryer is installed on a plinth, it must be secured.The plinth must be secured to the floor. Payment...

Installation *INSTALLATION* 52 Aufstellen Transportieren Transportieren Sie den Trockner zumAufstellungsort. , Achten Sie beim Transport des Trockners auf dessen Standsicher-heit. Ausrichten , Im Schwenkbereich der Trock- nertür darf keine abschließbare Tür,Schiebetür oder entgegengesetztangeschlage...

Installation *INSTALLATION* 53 Electrical connection The electrical connection must be established by a qualified electri-cian.  The electrical connection may only be made to an electrical system provided in accordance with all appropriate local and national legisla-tion, regulations and guidelines...

Installation *INSTALLATION* 55 Use: - For the vent ducting: exhaust hose* or a plastic waste water pipe (e.g. HT piping systems) with a minimum diameter of 100 mm. - *optional accessories Calculating thetotal ductinglength The friction of the vent ducting with its bends and various compon-ents provi...

Installation *INSTALLATION* 56 Sample calculation A 1 bend, 90° = 1 x 0.8 m relative pipe length = 0.8 m B/D 2 bends, 90° = 2 x 0.8 m relative pipe length = 1.6 m C 0.5 m pipe = 0.5 x 1 m relative pipe length = 0.5 m Total ducting length = 2.9 m Result: the total ducting length is less than 20 m (as...

Installation *INSTALLATION* 57 Berechnungsbeispiel , Ausnahmen bei der Auslegung der Abluftführung sind gemäß Bau-ordnung der Länder auszuführen.Fragen Sie den Bezirksschornstein-fegermeister/die Bezirksschornstein-fegermeisterin. A Mauerrohr, mit Gittereinsatz = 1 x 3,8 m Vergleichsrohrlänge = 3,8 ...

Installation *INSTALLATION* 59 Abluftsammelleitung , Ausnahmen bei der Auslegung der Abluftführung sind gemäß Bau-ordnung der Länder auszuführen.Fragen Sie den Bezirksschornstein-fegermeister/die Bezirksschornstein-fegermeisterin. , Sie müssen pro Trockner eine Rückstauklappe installieren! , Bei Nic...

Optional accessories 60  Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. Communication box The optional communication box allows external hardware from Miele and other suppliersto b...

Optional accessories 61 Copyright and licences For the purpose of operating and controlling the communication module, Miele uses propri-etary or third-party software that is not covered by open source licensing terms. This soft-ware/these software components are protected by copyright. The copyright...

Technical data 62 Technical data PDR 510 EL Height 1020 mm Width 700 mm Depth 763 mm Depth with door open 1293 mm Drum volume 250 l Maximum load size (dry weight) 10 kg Supply voltage See data plate Fuse rating (on site) See data plate Power rating See data plate Test certifications awarded See data...

Malaysia Miele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768 Miele New Zealand LimitedIRD 98 463 6318 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele...

Warning and Safety instructions 5  The tumble dryer must not be used in a non-stationary location (e.g. on a ship).  Do not install the tumble dryer in a room where there is a risk of frost. At temperatures around freezing point, the tumble dryer may not be able to operate properly. The permittedr...

Warning and Safety instructions 6  Danger of squashing or cutting fingers etc. around the drum door hinges and the fluff fil- ter cover. Use the appropriate handles and release catches only.  Always make sure that the drum is stationary before reaching in to remove laundry. Do not touch the drum w...

Warning and Safety instructions 7  During the drying process, the door glass and the frame around the drum door will get hot. Please be aware that the laundry may also be hot if it is removed from the tumble dryerbefore the end of the drying programme.  To ensure the correct performance of the tum...

Warning and Safety instructions 8  This tumble dryer is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This speciallamp must only be used for the purpose for which it is intended. It is not suitab...

Warning and Safety instructions 9  Fire hazard due to controllable socket. This tumble dryer must not be connected to a controllable socket (e.g. a timer). There is a risk of the laundry self-igniting if the tumbledryer ’s cooling phase is interrupted.  The programme ends when the cooling phase st...

Description of the machine 10 PDR 510 (electrically heated) 1 2 3 4 6 5 7 8 9 10 a Control panel with rotary control b Door c Fluff filter flap d 4 height-adjustable screw feet e Electrical connection f Communication module slot g Intake vents for drying air h Exhaust duct Ø 100 mm i Connection for ...

Operating the tumble dryer 11 Machines with residual moisture control (ROP) 1 2 3 4 5 6 7 8 9 a Control field b Sensor controls for the drying levels c Status displays     Light up when necessary. d   sensor control Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. be...

Operating the tumble dryer 12 Drying programmes -   position = “ Cottons ” programme For drying cotton and linen fabrics. -   position = “ Cottons   Low temperature ” programme For drying delicate cotton and linen fabrics. -   position = “Synthetics/Delicates” programme For drying synthetic fibr...

Operating the tumble dryer 14 Timed programmes - 5  position = Timed drying : 05 minutes - 10 – 55  position = Timed drying : 10–55 minutes - 60  position = Timed drying : 60 minutes -   position = machine off

Operating the tumble dryer 16 -   position range = “high” temperature setting For drying cotton and linen fabrics. -   position = machine off

Operating the tumble dryer 17 How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected.If a sensor control is dimly lit, this means it can be selected. Sensor c...

Drying 18 1. Notes on correct laundry care Washing beforedrying Heavily soiled laundry must be washed particularly thoroughly. Usesufficient detergent and select a high wash temperature. If in doubt,wash the items several times. The tumble dryer must not be used for drying items of laundrywhich have...

Drying 19  Load laundry into the tumble dryer. Risk of damage with laundry getting trapped.Laundry can be damaged by getting trapped when closing the door.When closing the door, make sure that laundry does not get trappedin the door opening. Do not overload the drum. Overloading can cause unnecessa...

Drying 21 4. Starting a programme Starting a pro-gramme  Touch the flashing Start/Stop sensor control. The Start/Stop sensor control will light up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts. Laundry items and f...

Programme overview 22 “Label” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size  Cottons  Cotton items with normalresidual moisture - Machine iron ( 40  %) - Hand iron ( 25  %) - Normal ( 0  %) - Normal plus ( -2  %) - ...

Programme overview 23 “Standard” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size  Cottons Single and multi-layercotton/linen items - Machine iron ( 40  %) - Hand iron ( 25  %) - Normal ( 0  %) - Normal plus ( -2  %) - ...

Changing the programme sequence 24 Changing a programme once it has started You cannot change to another programme once a programme hasstarted (this prevents unintentional alterations). You will need to can-cel the current programme before you can select a new one.  Risk of fire due to incorrect us...

Problem solving guide 25 Fault diagnosis Message Cause and remedy The display remains dark. There is no power to the tumble dryer.  Check the mains plug, main switch and fuses (on site). Problem Cause and remedy Condensate is escapingfrom an unexpected loca-tion. The drain is dirty.  Inspect the d...

Problem solving guide 26 Problem Cause and remedy  You can remove the cover in the loading area to clean theair guide area underneath. The vent ducting or its openings are clogged with hair andfluff, for example.  Check and clean all components in the vent ducting (e.g.wall pipe, external grille, ...

Connectivity 27 Pairing instructions Follow the steps below to connect the tumble dryer to your network. Opening the Supervisor level  Switch on the appliance by turning the rotary control from the   position to any other po- sition.  Open the door of the tumble dryer.  Press and hold the /  s...

Connectivity 28 Establishing the network connection using a LAN cable The optional XKM 3200 WL PLT communication module is required for wired networkconnection.  On the supervisor level, select   using the   or   arrow buttons.  Then select the COM module   using the   or   arrow buttons...

Optional accessories 30  Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. Communication box The optional communication box allows external hardware from Miele and other suppliersto b...

Optional accessories 31 Copyright and licences For the purpose of operating and controlling the communication module, Miele uses propri-etary or third-party software that is not covered by open source licensing terms. This soft-ware/these software components are protected by copyright. The copyright...

Technical data 32 Technical data PDR 510 EL Height 1020 mm Width 700 mm Depth 763 mm Depth with door open 1293 mm Drum volume 250 l Maximum load size (dry weight) 10 kg Supply voltage See data plate Fuse rating (on site) See data plate Power rating See data plate Test certifications awarded See data...

Malaysia Miele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768 Miele New Zealand LimitedIRD 98 463 6318 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele...