Page 2 - Contents
Contents 2 Caring for the environment ........................................................................................................ 5 Warning and Safety instructions ............................................................................................. 6 Appropriate use ..............
Page 4 - Technical data
Contents 4 Technical data ............................................................................................................................... 62 Technical data ...................................................................................................................................
Page 5 - Caring for the environment; Disposal of the packing material
Caring for the environment 5 Disposal of the packing material The packaging is designed to protect the appliance from damage dur-ing transportation. The packaging materials used are selected frommaterials which are environmentally friendly for disposal and shouldbe recycled.Recycling the packaging r...
Page 6 - Warning and Safety instructions; It is essential to read these instructions.; Appropriate use; The tumble dryer is not intended for outdoor use.
Warning and Safety instructions 6 It is essential to read these instructions. This tumble dryer complies with all current local and national safety requirements. How-ever, inappropriate use can lead to personal injury and damage to property.Read the operating instructions carefully before using th...
Page 7 - Foreseeable misuse
Warning and Safety instructions 7 Please supervise children in the vicinity of the tumble dryer and do not let them play with it. This tumble dryer may also be operated in public areas. Any uses other than those listed above are prohibited. The manufacturer accepts no liab- ility in such cases...
Page 9 - Follow the instructions in “Installation of the ducting”.; Correct use; Do not use a pressure washer or water jet to clean the tumble dryer.
Warning and Safety instructions 9 The vent ducting must never be installed in any of the following flues or shafts: - Chimneys or smokestacks that are in use.- Shafts that are used to ventilate installation rooms with fireplaces.- Flues that are used by third parties. Smoke or exhaust gas that is ...
Page 10 - The fluff filter must be cleaned on a regular basis.
Warning and Safety instructions 10 Never operate the tumble dryer without the fluff filter or with a damaged fluff filter. This could lead to malfunctions. Fluff can clog the air channels, heating elements and vent duct-ing, which could result in a fire. In this case, stop the tumble dryer immedia...
Page 11 - Accessories; ing and Safety instructions.; Decommissioning the tumble dryer
Warning and Safety instructions 11 Accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. The tumble dryer can also be combined with a Miele washing machine in a washer-drye...
Page 12 - Description of the machine
Description of the machine 12 PDR 510 (electrically heated) 1 2 3 4 6 5 7 8 9 10 a Control panel with rotary control b Door c Fluff filter flap d 4 height-adjustable screw feet e Electrical connection f Communication module slot g Intake vents for drying air h Exhaust duct Ø 100 mm i Connection for ...
Page 13 - Operating the tumble dryer; Machines with residual moisture control (ROP); Normal plus
Operating the tumble dryer 13 Machines with residual moisture control (ROP) 1 2 3 4 5 6 7 8 9 a Control field b Sensor controls for the drying levels c Status displays Light up when necessary. d sensor control Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. be...
Page 14 - Drying programmes; PRO
Operating the tumble dryer 14 Drying programmes - position = “ Cottons ” programme For drying cotton and linen fabrics. - position = “ Cottons Low temperature ” programme For drying delicate cotton and linen fabrics. - position = “Synthetics/Delicates” programme For drying synthetic fibr...
Page 16 - Timed programmes; Timed drying
Operating the tumble dryer 16 Timed programmes - 5 position = Timed drying : 05 minutes - 10 – 55 position = Timed drying : 10–55 minutes - 60 position = Timed drying : 60 minutes - position = machine off
Page 18 - position range = “high” temperature setting
Operating the tumble dryer 18 - position range = “high” temperature setting For drying cotton and linen fabrics. - position = machine off
Page 19 - How the control field works; Sensor controls for the drying levels; Indicators
Operating the tumble dryer 19 How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected.If a sensor control is dimly lit, this means it can be selected. Sensor c...
Page 20 - Initial commissioning; Risk of injury or damage to property due to improper installation.
Initial commissioning 20 Risk of injury or damage to property due to improper installation. Incorrect installation of the tumble dryer can lead to personal injuryor damage to property.Before commissioning the tumble dryer for the first time, make sureit has been installed.Connect the tumble dryer ...
Page 21 - Notes on correct laundry care; Damage due to foreign objects which were not removed from; Care symbols; Drying; Ironing; Loading the tumble dryer
Drying 21 1. Notes on correct laundry care Washing beforedrying Heavily soiled laundry must be washed particularly thoroughly. Usesufficient detergent and select a high wash temperature. If in doubt,wash the items several times. The tumble dryer must not be used for drying items of laundrywhich have...
Page 22 - Closing the door; Selecting a programme
Drying 22 Load laundry into the tumble dryer. Risk of damage with laundry getting trapped.Laundry can be damaged by getting trapped when closing the door.When closing the door, make sure that laundry does not get trappedin the door opening. Do not overload the drum. Overloading can cause unnecessa...
Page 24 - Starting a programme; Care notes
Drying 24 4. Starting a programme Starting a pro-gramme Touch the flashing Start/Stop sensor control. The Start/Stop sensor control will light up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts. Laundry items and f...
Page 25 - Programme overview; “Label” programme package
Programme overview 25 “Label” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size Cottons Cotton items with normalresidual moisture - Machine iron ( 40 %) - Hand iron ( 25 %) - Normal ( 0 %) - Normal plus ( -2 %) - ...
Page 26 - “Standard” programme package
Programme overview 26 “Standard” programme package Programme name Suitable fabrics Selectable drying levels (residual moisture in %) Activatable extras Load size Cottons Single and multi-layercotton/linen items - Machine iron ( 40 %) - Hand iron ( 25 %) - Normal ( 0 %) - Normal plus ( -2 %) - ...
Page 27 - Changing the programme sequence; Changing a programme once it has started
Changing the programme sequence 27 Changing a programme once it has started You cannot change to another programme once a programme hasstarted (this prevents unintentional alterations). You will need to can-cel the current programme before you can select a new one. Risk of fire due to incorrect us...
Page 33 - Heater bank temperature
Supervisor level (programming mode) 33 Pro- gramme Designation Possible set value Standard setting Explanation Pressure sensor = Off = Normally open contact = Normally closed contact External exhaust flap = No = Yes External exhaust flap delay ...
Page 34 - Reversing times
Supervisor level (programming mode) 34 Set value in the display Temperature 32 °C/90 °F 33 °C/91 °F 34 °C/93 °F 35 °C/95 °F 36 °C/97 °F 37 °C/99 °F 38 °C/100 °F 39 °C/102 °F 40 °C/104 °F 41 °C/106 °F 42 °C/108 °F 43 °C/109 °F 44 °C/111 °F 45 °C/113 °F 46 ...
Page 36 - Pauses; Quitting programming mode; The tumble dryer is switched off.
Supervisor level (programming mode) 36 Set value in the display Seconds 270 s 275 s 280 s 285 s 290 s 295 s 300 s Pauses Set value Seconds 2 s 3 s 4 s 5 s Quitting programming mode To quit programming mode, turn the rotary control on the tumble dryer to the posi...
Page 37 - Connectivity; Pairing instructions; Opening the Supervisor level
Connectivity 37 Pairing instructions Follow the steps below to connect the tumble dryer to your network. Opening the Supervisor level Switch on the appliance by turning the rotary control from the position to any other po- sition. Open the door of the tumble dryer. Press and hold the / s...
Page 38 - Establishing the network connection using a LAN cable; System requirements for WiFi
Connectivity 38 Establishing the network connection using a LAN cable The optional XKM 3200 WL PLT communication module is required for wired networkconnection. On the supervisor level, select using the or arrow buttons. Then select the COM module using the or arrow buttons...
Page 40 - Cleaning and care; Cleaning the fluff filter; Check and clean the fluff filter at the latest when the; Kontrollieren und reinigen Sie; Drehen Sie das innere Flusensiebteil.; To open, press against the right side of the fluff filter flap.; Kontrollieren und reinigen Sie; Drehen Sie das innere Flusensiebteil.; Reinigung und Pflege; Use the handle to pull out the fluff filter.
Cleaning and care 40 Cleaning the fluff filter A two-part fluff filter in the air supply area collects fluff released bytextiles. Remove and dismantle the fluff filter for cleaning. Check and clean the fluff filter at the latest when the Clean out air- ways message appears. Tip: You can also use a v...
Page 41 - Hold the fluff filter by the handles.; Flusensiebteile trocken reinigen; Die Flusensiebteile vor Wieder-; Flusensieb einsetzen; Bei einer starken, sichtbaren; Shake out the fluff and/or pick it off with your fingers.
Cleaning and care 41 Dismantling thefluff filter Flusensieb reinigen Ein zweiteiliges Flusensieb im Luftfüh-rungsbereich fängt anfallende Flusenauf. Es wird zur Reinigung entnommenund demontiert. , Kontrollieren und reinigen Sie das Flusensieb spätestens bei derPrüfmeldung: Luftwege reinigen . Tipp:...
Page 42 - Cleaning the air supply area; Rapid cleaning; Luftführungsbereich reinigen; Schnellreinigung; – von der Abdeckung im Einfüllbereich; Zusätzliche Reinigung
Cleaning and care 42 Insert the inner fluff filter part into the outer part. Turn the inner part of the fluff filter clockwise slightly until you feel itengage. Hold the fluff filter by its handle and push it as far as it will go intothe lower air supply area. Do not rotate the handle as this ...
Page 43 - Risk of damage due to solvent-based cleaning agents and abras-; Fan impeller; Also clean the area in front of the fan impeller.
Cleaning and care 43 Risk of damage due to solvent-based cleaning agents and abras- ive cleaners.Solvent based cleaning agents, abrasive cleaners, glass cleaners orall-purpose cleaners can cause damage to plastic surfaces andother parts.Clean the tumble dryer with a slightly damp cloth and a mild ...
Page 44 - Cover in door area; heraus; – Abdeckung im Einfüllbereich; abnehmen; Reach under the edge of the cover (see arrows) and lift off the cover.
Cleaning and care 44 - Cover in door area Only remove the cover in the door area in the event of a majorblockage. Removing thecover Look in the drum. – Abdeckung im Einfüllbereich , Die Abdeckung im Einfüllbereich sollten Sie nur im Falle einer extremstarken Verstopfung entnehmen. ^ Schauen Sie in...
Page 46 - Problem solving guide; Fault diagnosis; The display remains dark.
Problem solving guide 46 Fault diagnosis Message Cause and remedy The display remains dark. There is no power to the tumble dryer. Check the mains plug, main switch and fuses (on site). Problem Cause and remedy The efficiency of the tumbledryer decreases. The fluff filter in the tumble dryer is di...
Page 47 - The laundry has not been spun sufficiently.
Problem solving guide 47 Problem Cause and remedy Check and clean all components in the vent ducting (e.g.wall pipe, external grille, bends, elbows, etc.). The flow of air is insufficient (e.g. because it is installed in asmall room). When drying, open a door or window to ensure sufficientventil...
Page 48 - Customer Service Department; Contact in case of malfunction
Customer Service Department 48 Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your MieleDealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitor...
Page 49 - Installation locations; Front view; Installation; Vent ducting; Side view; Seitenansicht; Netzanschlussleitung; Draufsicht; Bei Aufstellung auf einem bau-; Kassiergerät; Installation
Installation *INSTALLATION* 49 Installation locations Front view Aufstellsituationen Vorderansicht a Abluftanschluss b Netzanschlussleitung c Bedienungsblende d Tür e Flusenfilterklappe f Vier höhenverstellbare Schraubfüße Installation 3 7 a Vent ducting b Electrical connection cable c Control panel...
Page 50 - Rear view
Installation *INSTALLATION* 50 Rear view 1 2 3 4 5 6 a Electrical connection b Communication module slot c Intake vents for drying air d Exhaust duct Ø 100 mm e Connection for communication box f Communication box (optional)For setting up a connection with external systems View from above Seitenansi...
Page 51 - Risk of injury and damage due to missing tumble dryer fasten-; Payment systems; Aufstellen; Transportieren; Achten Sie beim Transport des; Ausrichten; Im Schwenkbereich der Trock-; Risk of injury caused by the tumble dryer tipping over.; Levelling
Installation *INSTALLATION* 51 Risk of injury and damage due to missing tumble dryer fasten- ings.When installing on a plinth, an unsecured tumble dryer can slip andfall off the plinth.If the tumble dryer is installed on a plinth, it must be secured.The plinth must be secured to the floor. Payment...
Page 52 - Trockner gegen Verrutschen sichern; Der Trockner; muss; an den
Installation *INSTALLATION* 52 Aufstellen Transportieren Transportieren Sie den Trockner zumAufstellungsort. , Achten Sie beim Transport des Trockners auf dessen Standsicher-heit. Ausrichten , Im Schwenkbereich der Trock- nertür darf keine abschließbare Tür,Schiebetür oder entgegengesetztangeschlage...
Page 53 - Electrical connection; Supply air and exhaust air management; Ventilation
Installation *INSTALLATION* 53 Electrical connection The electrical connection must be established by a qualified electri-cian. The electrical connection may only be made to an electrical system provided in accordance with all appropriate local and national legisla-tion, regulations and guidelines...
Page 55 - Table I; – 1 m laid straight or 1 m straight pipe; Table II; Required diameter
Installation *INSTALLATION* 55 Use: - For the vent ducting: exhaust hose* or a plastic waste water pipe (e.g. HT piping systems) with a minimum diameter of 100 mm. - *optional accessories Calculating thetotal ductinglength The friction of the vent ducting with its bends and various compon-ents provi...
Page 56 - Sample calculation; Total ducting length; the total ducting length is less than 20 m (as per Table II). A; View from above; Berechnungsbeispiel; Ausnahmen bei der Auslegung; Mauerrohr, mit Gittereinsatz; Bemaßung Abluftanschluss; Zuluftführung und Abluftführung
Installation *INSTALLATION* 56 Sample calculation A 1 bend, 90° = 1 x 0.8 m relative pipe length = 0.8 m B/D 2 bends, 90° = 2 x 0.8 m relative pipe length = 1.6 m C 0.5 m pipe = 0.5 x 1 m relative pipe length = 0.5 m Total ducting length = 2.9 m Result: the total ducting length is less than 20 m (as...
Page 57 - You will need; Abluftführung mit Alu-Flex; Wrap heat-resistant metallic tape around plug connections.
Installation *INSTALLATION* 57 Berechnungsbeispiel , Ausnahmen bei der Auslegung der Abluftführung sind gemäß Bau-ordnung der Länder auszuführen.Fragen Sie den Bezirksschornstein-fegermeister/die Bezirksschornstein-fegermeisterin. A Mauerrohr, mit Gittereinsatz = 1 x 3,8 m Vergleichsrohrlänge = 3,8 ...
Page 59 - Abluftsammelleitung; Risk of electric shock and injury due to using the tumble dryer
Installation *INSTALLATION* 59 Abluftsammelleitung , Ausnahmen bei der Auslegung der Abluftführung sind gemäß Bau-ordnung der Länder auszuführen.Fragen Sie den Bezirksschornstein-fegermeister/die Bezirksschornstein-fegermeisterin. , Sie müssen pro Trockner eine Rückstauklappe installieren! , Bei Nic...
Page 60 - Optional accessories; Communication box; Data protection and data security
Optional accessories 60 Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. Communication box The optional communication box allows external hardware from Miele and other suppliersto b...
Page 61 - Copyright and licences; . The liability and warranty arrangements for the open; Payment system
Optional accessories 61 Copyright and licences For the purpose of operating and controlling the communication module, Miele uses propri-etary or third-party software that is not covered by open source licensing terms. This soft-ware/these software components are protected by copyright. The copyright...
Page 62 - name of the product or the serial number; UK declaration of conformity
Technical data 62 Technical data PDR 510 EL Height 1020 mm Width 700 mm Depth 763 mm Depth with door open 1293 mm Drum volume 250 l Maximum load size (dry weight) 10 kg Supply voltage See data plate Fuse rating (on site) See data plate Power rating See data plate Test certifications awarded See data...
Page 64 - United Kingdom
Malaysia Miele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768 Miele New Zealand LimitedIRD 98 463 6318 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele...