Miele DC 120 WW - Manuals

6 ENGLISH 2 Presentation of machine 1 Connection for external fan 2 Connection to mains 3 Damper 4 Fan unit / Electric control unit (behind the panel) 5 Control panel 6 Hangers 7 Door hangers 1 2 3 4 5 6 7

ENGLISH 7 3 Air flow The illustration shows the air flow in the drying cabinet.Air intake is on both the left-hand and right-hand sides and through the hangers.

8 ENGLISH 4 Starting for the first time CAUTION Read the safety instructions on page 32 before using the cabinet. • Make sure that the cabinet is securely attached to the wall.. • Make sure that no packaging material has been left behind. • Use a mild detergent with hot water and wash the inside and...

ENGLISH 9 HELLO 1 2 3 4 5 5.1 Placement of washing • Take the hangers out of the drying cabinet to hang the items in. There is space for a complete set of workwear on each hanger. • Place the straps of the trousers over the hanger and then hang on the jacket. Place the hanger in one of the four supp...

10 ENGLISH 5.3 Programme description The drying cabinet has two drying programmes: • Impregnation • Normal The programmes automatically close the drying process when the fabrics are dry. 5.4 Selection of drying programme • Impregnation – Used for drying of a newer type of emergency services suit tha...

ENGLISH 11 5.6 Programme pause If the door is opened while the drying process is in progress, the heat will be turned off, and the fan will continue operating for another 5 minutes. If the door is closed within this 5 minute period, the drying process will start again from the beginning. If the door...

12 ENGLISH 6.1 Preventive maintenance by user The user should wipe the cabinet with a damp cloth after each use of the drying cabinet. It must be free of dust/grit. 6.2 Filter The drying cabinet has four filters located in the roof of the cabinet, two at the front and two at the rear. NB: If any of ...

ENGLISH 13 Questions What you can do The drying cabinet is not working. 1. Check the mains connection and that power is supplied.2. Check that no fuse has tripped.3. Have you pressed the start button?4. Are the doors closed? Drying takes a long time. 1. Clean the lint filters (must be done after eac...

ENGLISH 15 Torkskåp FT120FL Before contacting Service, you should find out the name, article number and serial number of the drying cabinet.This information can be found on the identification plate located inside the cabinet. 8 Servicing Name of the drying cabinet Article number Serial number (8 dig...

6 ENGLISH A H E B I D C F G N P O M 1 2 3 4 J 2 Specifications 1 Control panel 2 Electrical connection for external fans 3 Electrical connection to the power grid 4 Exhaust air connection ø125 mm. Permanently connected to separate duct or general ventilation. A B C D E F G H I J M N O P mm 1200 750 ...

B E F G C D A x2 x2 x4 x4 x2 x4 ENGLISH 7 3 Installation Position the drying cabinet where you want it to be placed.The carrying straps around the adjustable feeder can be used to lift the drying cabinet.Adjust the drying cabinet by the adjustable feet. Make sure that the top edges of the doors are ...

8 ENGLISH The wall brackets are attached to the top of the drying cabinet on delivery. Remove the wall brackets, rotate them and mount them as shown. (Screws and plastic plugs are included.) The drying cabinet must be fixed in the wall so that it cannot tip over. 3.2 Mechanical installation

10 ENGLISH A m² 5 A m² 4 Evacuation system 4.1 Fresh air The drying cabinet must be connected directly to the ventilation duct (not via intermediate pipes or hoses). The drying cabinet has an exhaust air volume flow of up to 250 cubic meters per hour. This air is first taken from the room where the ...

ENGLISH 11 4.2 Adjustment of the exhaust air The drying cabinet works most effectively when the airflow is optimal, about 200 m3/h. On the top of the drying cabinet there is a flap that can be set to a value that corresponds to the pressure drop in the duct. The maximum permissible pressure drop is ...

12 ENGLISH • Adjust the outlet flap at the top of the cabinet to the calculated pressure drop. The table shows common components in a ventilation system. The information in the table is to be understood as a guideline. For more information, please contact the manufacturer of the current system. NOTE...

1 2 3 ENGLISH 13 The electrical connection of the device must be carried out in accordance with the appli- cable electrical safety regulations. 1 Connection for external fans 2 Connection to the power grid 3 Bezel • Loosen the two screws ( Torx T20) under the front panel (3). Square holes in the fra...

14 ENGLISH HELLO 1 2 3 4 • Make sure that the main ON/OFF switch on the drying cabinet is turned off. The display is unlit. • Hold down the UP ARROW and DOWN ARROW BUTTONS and press the ON/OFF switch to the ‘ON’ position. The display lights up and on the top row shows ‘P105’ flashing, which is the p...

ENGLISH 15 7 Audit May only be carried out by authorized personnel. After complete installation of the machine and before its use, a functional test must be carried out. Before the machine can be used again after a repair, a functional check must always be carried out. • Select the desired program a...

16 ENGLISH 8 Information on scrapping 8.1 Disposal of the disused device Before scrapping the machine, carefully check its physical condition and whether there is a risk of parts of the construction starting to crumble or break.The disposal of the equipment parts depends on their specific properties...

18 ENGLISH 8.3 Handling of packaging GERMANY Updated information on the disposal of waste equipment The Electrical and Electronic Equipment Act (Elektra) contains many requirements for the handling of electrical and electronic equipment. The most important ones are compiled here. 1. Separate collect...