Page 4 - Safety instructions; service or a similarly qualified
21 EN Safety instructions Please carefully read and comply with the operating instructions.The appliance is intended for home use only and not for commercial purposes.Any other use is regarded as improper and may lead to personal injury and material damage. Melitta ® accepts no liability for damage ...
Page 5 - Risk of burning and scalding; Escaping fluids and steam may; General safety
22 Warning! Risk of burning and scalding Escaping fluids and steam may be very hot. Parts of the appliance also become very hot. Observe the following safety instructions to avoid scalds and burns: – Prevent skin from coming into contact with escaping fluids and steam. – Do not touch any nozzles on ...
Page 6 - At a glance; Figure A; Brewing unit and identification; Buttons; briefly; Text display example; Cappuccino
23 EN At a glance Figure A 1 Drip tray with cup plate and coffee grounds container (internal) 2 Float for the water level indicator in the drip tray 3 Height-adjustable outlet with LED cup illumination 4 Text display 5 ON /OFF button 6 Water reservoir 7 Two-chamber "Bean Select" bean contain...
Page 7 - General information; Starting up the appliance; Switching on for the first time; Danger of fire and electric shock
24 Accessories • 1 milk tube or 1 milk container including milk tube (depending on the model) • 1 Coffee scoop with screw-in aid for the water filter Before using for the first time General information • Only use pure water without carbonation. • Use the supplied test strip to determine the hardness...
Page 8 - Filling the bean container; Hazard for persons allergic to; over to decaffeinated beans, the first; Switching the appliance on and off; Preparation; always be filled with enough water for; Preparing Café Crème or Espresso
25 EN Filling the bean container Warning! Hazard for persons allergic to caffeine. Since a residual quantity of the previously used beans remains above the grinder, the two types of beans mix when changing to a different bean type. Consequently, when switching over to decaffeinated beans, the first ...
Page 9 - Preparing hot water; With the supplied coffee scoop, fill
26 • Connect the tube with the outlet and (depending on the model) the supplied Melitta ® CAFFEO ® CI ® milk container (Image C ) or insert in a conventional milk carton. • Press the button to set the coffee strength. • Press the button. The grinding process and coffee dispensing starts. • The dispe...
Page 10 - to prevent later risk of overfilling the; My Coffee button: Preparing; Ready; Operation of the menus; Exit; Overview of sub-menus; submenu; profile can be directly accessed using
27 EN • Press the button. Coffee dispensing starts. If no coffee was dispensed from the appliance within 3 minutes after opening the ground coffee chute, the appliance will switch back to coffee bean operation and will discard the ground coffee into the coffee grounds container to prevent later risk...
Page 12 - OFF; and; OFF at; Setting the switch-off delay; Setting a specific switch-off time; Auto OFF
29 EN "Care" sub-menu Here, various integrated care and cleaning programmes can be started. Menu option Meaning “Exit” To exit the sub-menu "Rinsing" To rinse the coffee unit “Easy Cleaning” To rinse the milk unit “Intensive Cleaning” To start the Intensive Cleaning programme for the...
Page 13 - “Water hardness” sub-menu; Water; “Statistics” sub-menu; was first started up can be called up.; Resetting the appliance to the default
30 “Water hardness” sub-menu Here, the water hardness can be set. Use the test strip provided to determine the water hardness in your area. In doing so, please comply with the instructions on the test strip packaging. Water hardness is set at “Very hard” in the factory.• Call up the Water hardness s...
Page 14 - while; Lever position; Cleaning and maintenance; Daily cleaning
31 EN Adjusting the grinding fineness The grinding fineness level was optimally adjusted prior to delivery. It is therefore recommended to only adjust the grinding fineness after about 1 000 coffee preparations (about 1 year). The grinding fineness can only be set while the mill is running. Thus, th...
Page 15 - starts (hot water will flow out of the outlet; Rinsing the milk unit (“Easy
32 Rinsing the coffee unit (Rinsing) The appliance performs an automatic rinsing of the coffee unit when it is switched on and off. The coffee unit can also be rinsed in between. • Place a vessel under outlet 3 . • Call up the Care sub-menu. • Select Rinsing in the menu. • Select Start in the menu. ...
Page 16 - finished, the appliance is ready for; Cleaning parts of the milk system; Integrated cleaning programme
33 EN • Empty the drip tray and coffee grounds container in between and reinsert them. • If the message " Place a vessel with 0.7 l capacity under the outlet “ appears on the text display 4 , place a corresponding vessel under outlet 3 . • Two rinsing processes will be performed.• If the message...
Page 17 - Integrated descaling programme; The descaling agent can cause skin
34 Integrated descaling programme Warning! The descaling agent can cause skin irritations Comply with the safety instructions and the dosing information specified on the descaling agent packaging. The integrated descaling programme (takes about 25 minutes) removes lime residues inside the appliance....
Page 18 - Inserting the water filter; Changing the water filter
35 EN Inserting, changing and removing the water filter The Melitta ® Claris ® water filter removes lime and other harmful substances from the water. The water filter should be changed regularly, at the latest, however, when the appliance prompts to do so. The water filter is available in specialise...
Page 19 - Removing the water filter; water filter should; Transport, Storage and; Venting the appliance; Danger of burning and scalding; Remove the water filter if necessary; Transport
36 Removing the water filter The Melitta ® Claris ® water filter should not remain dry over an extended period of time. It is therefore recommended to store the Melitta ® Claris ® water filter in the refrigerator in a glass of water when the appliance will not be in use for extended periods.• Flip u...
Page 20 - Troubleshooting; Fault
37 EN Troubleshooting Fault Cause Measure Coffee only flows drop-by- drop. Grinding fineness is too fine. Adjust the grinding fineness more coarse. Clean the brewing unit. Perform a descaling or cleaning programme if necessary. Coffee does not flow. Water reservoir not filled or incorrectly inserted...
Page 21 - EN - Guarantee Conditions
235 EN - Guarantee Conditions In addition to the end consumer’s statutory guarantee rights in relation to the seller; for new appliances bought after 01 September 2013 from a dealer authorized due to his expertise by Melitta, we give a manufacturer’s guarantee based on the following conditions: 1. T...
Page 22 - Melitta Europa
Version 4.0 09/2016 123 6 -0816 Melitta Europa GmbH & Co. KGD-32372 Minden 21.09.2016 07:23:31
