Makita GA5020Y - Manuals

7 For tool with lock-off button To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the tool, depress the lock-off button and pull the switch trigger. Release the switch trigger to stop. For tool with typeB switch trigger 1 2 A B 008415 For tool with...

8 Installing loop handle (Accessory) CAUTION: • Always be sure that the loop handle is installed securely before operation. 1 2 008049 Always install the loop handle on the tool before operation. Hold the tool's switch handle and the loop handle firmly with both hands during operation. Install the l...

9 Installing or removing depressed center grinding wheel/Multi-disc (accessory) WARNING: • Always use supplied guard when depressed center grinding wheel/Multi-disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. 1 2 3 007995 Mount the inner flange onto...

10 Replacing carbon brushes 1 001145 Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes. Use a screwdri...