Makita DF010DSE - Manuals

(1) Remove two Set plates from Handle set as follows: Insert a small slotted screwdriver through the punched hole of set plate and move Set plate in the direction of the arrow using the screwdriver while pushing Set plate against Handle set. ( Fig.2 ) (2) Handle set can be removed from Motor housing...

(4) Separate LED from Housing, then remove a assembled unit that consists of Switch unit, DC motor and Gear assembly etc. ( Fig. 5 ) (5) Remove Speed change lever assembly and Switch unit (microswitch / green color) from Gear assembly. (6) Remove Gear assembly from DC motor. Gear assembly can be rep...

Fig. D-2 hook of Controller Terminal Motor housing L Switch unit (large) Route LED lead wires between ribs. Route Lead wires between emboss and rib. Route Lead wires between Switch unit (large) and rib. emboss Connector LED rib ribs rib Route this Lead wire (red) through the hook of Controller. Fix ...