Lexmark N2000 Series - Manuals

Page 3 - MarkNet; internal print server; Quick Start

3 MarkNet internal print server Quick Start Setup - - - - - - - - - - - - - - - - - - - - 4 Prerequisites - - - - - - - - - - - - - - - - - - - - - - - - - - 4Attach the printer to the network - - - - - - - - - - - - - - - - 4Print a network setup page - - - - - - - - - - - - - - - - - - - 5Configur...

Page 4 - Setup; Prerequisites

4 Setup Prerequisites MarkNet internal print servers are sometimes called internal network adapters or INAs. You may have purchased a printer that has Ethernet, Token-Ring or other network ports preinstalled. If not, you should install a MarkNet™ internal print server now. Refer to your printer docu...

Page 5 - Step 1: Set the IP address, netmask and gateway

5 Look for the UAA (universally administered address) under the Network heading on the setup page. The UAA is a 12-digit number. The left column shows the address in MSB form and the right column shows the address in canonical form. The UAA is preset at the factory. However, you can override it with...

Page 6 - Printer operator panel; Static ARP and telnet

6 • If you don’t have DHCP, there are other methods you can use to manually assign the address, such as the printer operator panel, static ARP and telnet, RARP and telnet, BOOTP, or MarkVision or other Lexmark utility. Instructions for three of these methods follow. Printer operator panel A simple w...

Page 7 - Print server TCP/IP setup utility; Step 2: Set up to print; Print to a queue on a Windows NT server

7 Print server TCP/IP setup utility It doesn’t matter which form of the UAA you use (MSB or canonical). Information on installing, using and troubleshooting the utility resides on the CD. You can use this simple utility to initialize the printer IP address if your workstation is running Windows 95, ...

Page 9 - Novell NetWare

9 Novell NetWare NDPS (Novell Distributed Print Services) Some versions of the Drivers, MarkVision and Utilities CD contain the Lexmark NDPS IP Gateway. To find out if your CD contains the gateway, look on the CD for a subdirectory named NDPS. If you have MarkNet print servers in an NDPS environment...

Page 11 - Troubleshooting

11 Troubleshooting For expanded troubleshooting information, look on the Drivers, MarkVision and Utilities CD. Click View Documentation and look for the MarkNet link. Free firmware updates for any Lexmark print server are available on the web site at www.lexmark.com. TCP/IP 1 Make sure the TCP/IP pr...

Page 13 - Windows NT Server 4.0

13 Windows NT Server 4.0 1 Make sure you are using TCP/IP for communications between the Windows server and the MarkNet print server. 2 Make sure TCP/IP is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under TCP/IP. 3 Verify that TCP/IP ...

Page 15 - Lexmark customer support

15 Lexmark customer support World Wide Web www.lexmark.com CompuServe Go Lexmark Internet ftp.lexmark.com U.S. and Canada,technical support and any other customer needs 1-800-LEXMARK Lexmark phone numbers (worldwide) On the Drivers, MarkVision and Utilities CD, click Contact Lexmark, Customer Suppor...

Page 16 - Electronic Emission Notices; Industry Canada Compliance Statement

16 Electronic Emission Notices Federal Communications Commission (FCC) Compliance Information Statement The MarkNet internal print server has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two ...

Page 17 - Japanese VCCI Notice

17 AVERTISSEMENT: Ce produit appartient à la classe A. Dans un environnement résidentiel, ce produit risque de provoquer des interférences radio, auquel cas l'utilisateur devra prendre les mesures adéquates. AVVERTENZA: Questo prodotto appartiene alla Classe A. In ambiente domestico, questo prodotto...