Lexmark 925de - Manuals - manualsarea.com

Page 5 - Introduction; Overview; Understanding letters after model numbers

Introduction Overview This edition of the Technical Reference contains information about the following printers or multifunction printers (MFPs): C925deC925dteX925de Understanding letters after model numbers Some Lexmark TM printers and MFP options may have one or more letters after the model number...

Page 7 - Learning about the printer; Finding information about the printer

Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: • Connecting the printer • Installing the printer software Setup documentation—The setup documentation camewith the printer and is also available on the Lexmark Website...

Page 9 - Printer Control Language (PCL) page formatting; Printable areas

Printer Control Language (PCL) page formatting For more information on PCL, see the Printer Languages and Interfaces Technical Reference . It contains a complete listing with descriptions of PCL commands. To determine which PCL commands your printer supports, see “Appendix A: PCL support” on page 22...

Page 10 - Supported paper and envelope dimensions

Supported paper and envelope dimensions The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For moreinformation about the printable areas and logical pages for PCL emulation, see “Printable areas” on page 9. Selection Paper/envelopedimension...

Page 12 - PJL commands information

Printer Job Language (PJL) PJL commands information Your printer supports complete PJL commands, including certain commands that cause the printer to enter PCLemulation, PostScript emulation, and Personal Printer Data Stream (PPDS). For a complete listing with descriptions of PJL commands, see the P...

Page 13 - Supported paper sizes

PostScript (PS) emulation Your printer supports complete PostScript emulation supplemental operators. For full, detailed descriptions of theseoperators, see the PostScript emulation chapter of the Printer Languages and Interfaces Technical Reference . To determine which commands your printer support...

Page 14 - PostScript paper tray support

PostScript paper tray support When the printer receives one of the operators listed in “Tray selected with tray operators” on page 14, it performsthe actions listed in this section. This paper tray selection process ends when a suitable paper source is chosen andpaper is fed from this tray. • The pr...

Page 15 - PostScript envelope size support

= Supported X = Not supported Printer model Operator Tray selected (correspondingimage size is set) C925de, C925dte X925de a4tray Tray with A4-size paper a5tray Tray with A5-size paper a6tray Tray with A6-size paper b4tray Tray with B4 ‑ size paper b5tray Tray with B5-size paper customtray Tray with...

Page 16 - PostScript envelope tray support

= Supported X = Not supported Envelope sizes Printer model Size name Literal name Size (mm) Size (inches) Size (points) C925de, C925dte X925de Commercial 10 4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 297 x 684 International B5 176x250envelope 176 x 250 6.93 x 9.84 499 x 708 International C5 162x229...

Page 18 - Printer specifications; Airflow requirement; Noise emission levels

Printer specifications Airflow requirement The room should meet ASHRAE 62—1989 standards. Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Status 1-meter average sound pressure, dBA C925de, C925dte X925de ADF color scan...

Page 19 - Electrical specifications; Power requirements; Physical specifications

Electrical specifications Printer model Electrical specification C925 SFP and X925 MFP low ‑ voltage models 100–127 V at 50–60Hz, nominal 90–137 V, extreme C925 SFP and X925 MFP high ‑ voltage models 220–240 V at 50–60Hz, nominal (available only in some countries or regions) 198–259 V, extreme Warni...

Page 20 - Clearance requirements

Multiple ‑ function printer dimensions (unpackaged) Printer model Height Width Depth Weight with cartridge (unpackaged) X925de 771 mm (30.35 in.) 672 mm (26.46 in.) 668 mm (26.30 in.) 79.3 kg (174.8 lb) Dimensions of the C925 or X925 hardware options (unpackaged) Option Height Width Depth Weight wit...

Page 21 - Altitude and atmospheric pressure specifications; Altitude specifications

Values for the ambient operating environment Printermodel Ambient operating environment C925de,C925dte 15.6 to 32.2°C (60 to 90°F)8–80% RH X925de 15.6 to 32.2°C (60 to 90°F) 8–80% RH Printer humidity ranges Printermodel Air relative humidity (RH) Operating value Shipping and storage value Product op...

Page 22 - Appendix A: PCL support; PCL emulation commands

Appendix A: PCL support PCL emulation commands = Supported X = Not supported Printer model Command Function C925de, C925dte X925de Decimal 8 Backspace (BS) Decimal 9 Horizontal Tab (HT) Decimal 10 Line Feed (LF) Decimal 12 Form Feed (FF) Decimal 13 Carrier Return (CR) Decimal 14 Select Secondary Fon...

Page 31 - Appendix B: PJL support; Common variables for both printer languages

Appendix B: PJL support Common variables for both printer languages = Supported X = Not supported Printer model Variable name C925de, C925dte X925de AUTOCONT AUTOSELECT X X BINDING BITSPERPIXEL X X CLEARABLEWARNINGS CONTEXTSWITCH X X COPIES CPLOCK DENSITY DISKLOCK X X DUPLEX ECONOMODE X X FORMATTERN...

Page 33 - Lexmark

= Supported X = Not supported Printer model Variable name C925de, C925dte X925de REPEATJOBTIMEOUT REPRINT RESERVEJOBTIMEOUT RESOLUTION RESOURCESAVE RESOURCESAVESIZE X X RET X X STRINGCODESET TIMEOUT USERNAME VERIFYJOBTIMEOUT WIDEA4 Lexmark ‑ unique PJL variables for both printer languages = Supporte...

Page 43 - Common variables for PCL emulation

Common variables for PCL emulation = Supported X = Not supported Printer model Variable name C925de, C925dte X925de FONTNUMBER FONTSOURCE PITCH PTSIZE SYMSET Lexmark ‑ unique variables for PCL emulation = Supported X = Not supported Printer model Variable name C925de, C925dte X925de LA4WIDTH LASSIGN...

Page 52 - PJL messages for attendance conditions

= Supported X = Not supported Printer model Message Status code Return string C925de, C925dte X925de Intervention Required - Waste Toner BottleNearly Full 40141 82.xx Waste toner bottle nearly full Intervention Required - Photoconductor Low 40204 84.xx [Color] imaging unit low Intervention Required ...

Page 68 - PJL messages for paper handling

= Supported X = Not supported Printer model Message Status code Return string C925de, C925dte X925de Intervention Required - Missing or DefectiveCartridge 40411 31.xx Missing or defective magenta cartridge Intervention Required - Toner Cartridge Missing 40412 30.xx Missing yellow cartridge and/or ye...

Page 73 - PJL messages for paper jams

PJL messages for paper jams = Supported X = Not supported Printer model Message Status code C925de, C925dte X925de Intervention Required - Paper Jam 4200x X X Intervention Required - Paper Jam 4200z Intervention Required - Paper Jam 4201x X X Intervention Required - Paper Jam 4201z Intervention Requ...

Page 80 - File and device protection commands

= Supported X = Not supported Printer model Command C925de, C925dte X925de LPRINT testpage • LPRINTDIRECTORY • LPRINTTESTPAGE • LPRINTMENUS • LPRINTPCLFONTS • LPRINTPSFONTS LESCAPECHAR LFAX PHONENUMBER X LOPENFILE LCLOSEFILE LREADFILE LWRITEFILE LRUNFILE LRENAMEFILE LDELETEFILE LFORMAT LDEFRAG File ...

Page 81 - Appendix C: PostScript support; Supplemental operators

Appendix C: PostScript support Supplemental operators = Supported X = Not supported Printer model Operator name C925de, C925dte X925de appletalktype buildtime byteorder checkpassword currentfilenameextend currentmanualduplexmode currentuniversalsize defaulttimeouts X X deletefile devcontrol devdismo...

Page 84 - Page device parameters

= Supported X = Not supported Printer model Operator name C925de, C925dte X925de setquiet setresolution setsccbatch setsccinteractive setsoftwareiomode settumble setuniversalsize setuserdiskpercent softwareiomode tumble userdiskpercent waittimeout X X Page device parameters = Supported X = Not suppo...

Page 88 - User interpreter parameters

= Supported X = Not supported Printer model Key C925de, C925dte X925de • PolicyReport PostRenderingEnhance X X PostRenderingEnhanceDetails X X • REValue X X • Type X X PowerSave ProcessColorModel X X Punch X X SlipSheet SlipSheetDetails • SlipSheetSource • Type Staple X X TraySwitch Tumble Universal...

Page 89 - System interpreter parameters

= Supported X = Not supported Printer model Key Default C925de, C925dte X925de IdiomRecognition true JobName ( ) JobTimeout JobTimeout system parameter MaxDictStack 255 MaxExecStack 10015 MaxFontItem 12500 MaxFormItem 100000 MaxLocalVM 2147483647 MaxOpStack 100000 MaxPatternItem 20000 MaxScreenItem ...

Page 92 - Devices supported

= Supported X = Not supported Printer model Key C925de, C925dte X925de WaitTimeout Devices supported = Supported X = Not supported Printer model Device C925de, C925dte X925de %AppSocketA% %AppSocketB% %AppSocketC% %AppSocketD% %EthernetPhysicalA% %EthernetPhysicalB% %EthernetPhysicalC% %EthernetPhys...

Page 94 - Device parameters

= Supported X = Not supported Printer model Device C925de, C925dte X925de %TokenRingPhysicalB% X X %TokenRingPhysicalC% X X %TokenRingPhysicalD% X X %TokenTalkA% X X %TokenTalkB% X X %TokenTalkC% X X %TokenTalkD% X X %USB_A% %USB_B% %USB_C% %USB_D% Device parameters = Supported X = Not supported Pri...

Page 103 - PostScript message keys commands

PostScript message keys commands = Supported X = Not supported Printer model Key C925de, C925dte X925de job status source Appendix C: PostScript support 103

Page 104 - Index

Index A air temperature ranges cartridges 21print quality assurance 20printer with cartridges 20 airflow requirement 18altitude specifications 21ambient operating environment 21atmospheric pressure 21 C clearance requirements 20commands PJL, file and device protection 80PJL, Lexmark ‑ unique 79 Post...