Lexmark 35ST018 - Manuals

1 4 3 2 1 5 1 Right side 304.8 mm (12 in.) 2 Front 508 mm (20 in.) 3 Left side 203.2 mm (8 in.) 4 Rear 203.2 mm (8 in.) 5 Top 800 mm (31.49 in.) Printer configurations CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until ...

Basic model 1 2 3 4 5 6 7 1 Display 2 Automatic document feeder (ADF) 3 ADF tray 4 ADF bin 5 Standard bin 6 Multipurpose feeder 7 Standard 550 ‑ sheet tray Learning about the printer 12

Configured model 1 2 3 1 2 3 1 Optional 250 ‑ sheet tray 2 Optional 550 ‑ sheet tray 3 Optional stapler Using the Embedded Web Server Note: This feature is available only in network printers or printers connected to print servers. If the printer is installed on a network, then you can use the Embedd...

3 Press Enter . The Embedded Web Server page appears. Understanding the basic functions of the scanner • Make quick copies or set the printer to perform specific copy jobs. • Send a fax using the printer control panel. • Send a fax to multiple fax destinations at the same time. • Scan documents and ...

Understanding the printer control panel Using the printer control panel Use the To 1 Printer control panel • View the printer status and messages. • Set up and operate the printer. 2 Home button Go to the home screen. 3 Sleep button Enable Sleep mode or Hibernate mode. Do the following to wake the p...

Indicator light Printer status Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber The printer is in Sleep mode. Blinking amber The printer is entering or waking fr...

Touch To 9 Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links. Note: The tree view supports only bookmarks created from this function, and not from any other application. 10 USB Drive View, select, print, scan, or e ‑ mail photos and documents fr...

Feature Description Printer IP address Example: 123.123.123.123 The IP address of your network printer is located at the upper left corner of thehome screen and appears as four sets of numbers separated by periods. You canuse the IP address when accessing the Embedded Web Server so you can view andr...

Setting up and using the home screen applications Notes: • Your home screen may vary, depending on your home screen customization settings, administrative setup, andactive applications. Some applications are supported only in select printer models. • There may be additional solutions and application...

3 Click Advanced > TCP/IP . 4 Look for IPv4 Address . Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Net...

Understanding the different applications Use To Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy”on page 23. Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 107. Forms and Favorites Quick...

Use To Streamline work processes by letting you quickly find and print frequently used online forms directlyfrom the printer home screen. Note: The printer must have permission to access the network folder, FTP site, or Web site where the bookmark is stored. From the computer where the bookmark is s...

3 Change the default scanning options, if necessary. • Default tray —Select the default tray to be used for printing scan images. • Default number of copies —Specify the number of copies that should automatically print when the application is used. • Default contrast setting —Specify a setting to in...

1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Mu...

Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continui...

Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have any ot...

1 Memory card connector 2 Option card connector 3 Printer hard disk connector 4 Lexmark Internal Solutions Port connector 4 Close the shield, and then the access door. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory d...

Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cordfrom the electrical outlet before continuing. If you have other dev...

4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 Close the ...

14 Close the shield. 15 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating availableoptions in the print...

Removing a printer hard disk Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, ...

Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices...

Attaching cables CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during alightning storm. Connect the printer to the computer using a USB cable ...

Use the To 7 USB printer port Connect the printer to a computer. 8 Security slot Attach a lock that will secure the printer in place. Setting up the printer software Installing the printer software Notes: • If you installed the printer software on the computer before but need to reinstall the softwa...

Updating available options in the printer driver When any hardware options are installed, you may need to manually add the options in the printer driver to makethem available for use. For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type run , and then navigate to: A...

Networking Notes: • Purchase a MarkNet TM N8350 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with theadapter. • A Service Set Identifier (SSID) is a name assigned to...

d Click the IP tab. e Type the printer IP address in the address field, and then click Add . • For AppleTalk printing: Notes: – Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to: System Preferences > Pri...

Notes: – If you do not know the SSID of the network that your computer is connected to, then launch the wireless utilityof the computer network adapter, and then look for the network name. If you cannot find the SSID or thesecurity information for your network, then see the documentation that came w...

6 Type the new IP address in the “Printer Name or IP Address” field. 7 Click OK > Close . For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of ...

In Windows 7 or earlier 1 Click , or click Start and then click Run . 2 In the Start Search or Run dialog, type devmgmt.msc . 3 Press Enter or click OK . b Double ‑ click Ports (COM & LPT) to expand the list of available ports. c Do either of the following: • Press and hold the COM port where yo...

Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information,see “Avoiding jams” on page 235 and “Storing paper” on page 77. Setting the paper size and type From the home screen, navigate to: > Paper Menu &...

6 Insert the tray. 7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded inthe tray. Note: Set the correct paper size and paper type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder w...

• Load envelopes with the flap on the left side facedown. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self ‑ stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, set the paper size and paper type...

Linking and unlinking trays When the paper size and paper type for any trays are the same, the printer links those trays. When one linked traybecomes empty, paper feeds from the next linked tray. We recommend giving all unique paper, such as letterhead anddifferent colored plain papers, a different ...

Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Names 2 Select a custom name, and then type a custom paper type name. 3 Touch . 4 Touch Custom Types , and then verify that the new custom paper type name has replaced the custom name. Assigning a custom...

Paper and specialty media guide Using specialty media Tips on using letterhead • Use letterhead designed specifically for laser printers. • Print samples on the letterhead being considered for use before buying large quantities. • Before loading letterhead, flex, fan, and straighten the stack to pre...

– Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal enve...

• Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprintingintroduces semi ‑ liquid and volatile components into the printer. • Use grain short card stock when possible. Paper guidelines Selecting the correct paper or specialty media reduces printing ...

For 60–90 ‑ g/m 2 (16–24 ‑ lb) bond paper, grain long paper is recommended. Fiber content Most high ‑ quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print...

Use papers printed with heat ‑ resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected bythe resin in toner. Inks that are oxidation ‑ set or oil ‑ base...

Supported paper sizes, types, and weights Supported paper sizes Paper size and dimension Standard 550 ‑ sheet tray Optional 250 ‑ or 550 ‑ sheet tray Multipurposefeeder ADF Scannerglass Duplexmode Business card X X X X X 3 x 5 X X X X 4 x 6 X X X X A4 210 x 297 mm(8.27 x 11.7 in.) A5 148 x 210 mm(5....

Paper size and dimension Standard 550 ‑ sheet tray Optional 250 ‑ or 550 ‑ sheet tray Multipurposefeeder ADF Scannerglass Duplexmode Universal * 76.2 x 76.2 mm to215.9 x 359.92 mm(3 x 3 in. to 8.5 x 14.17 in.) 7 3/4 Envelope (Monarch) 98.4 x 190.5 mm(3.875 x 7.5 in.) X X X X X 9 Envelope 98.4 x 226....

Paper type Standard550 ‑ sheet tray 250 ‑ or 550 ‑ sheet tray Multipurposefeeder Duplex mode ADF Scanner glass Recycled Paper labels X Bond X X X Envelope 2 Rough envelope X X X Letterhead Preprinted Colored paper Light paper Heavy paper Rough/Cotton X Custom Type [x] 1 Transparencies are supported ...

Printing Printing forms and a document Printing forms Use the Forms and Favorites application to quickly and easily access frequently used forms or other information thatis regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Settingup Fo...

Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quali...

• If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documentsfrom the flash drive. Warning—Potential Damage: Do not touch the USB cable, any ...

Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • .dcx • .gif • .jpeg or .jpg • .bmp • .pcx • .tiff or .tif • .png • .fls Printing confidential and other he...

2 Touch Submit . Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users 1 With a document open, click File > Print . 2 Click P...

• If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Confidential Print Setup . 3 Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that userare deleted...

Copying Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such as magazineclippings). Making copies Making a quick copy 1 Load an origi...

3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have...

3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that contain transparencies, then navigate to: Manual Feeder > > select the size of the transparencies > > Transparency > 4 Load transparencies into the multipurpose feeder, and...

Making copies using paper from a selected tray 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place...

Collated Not collated 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place these items on the scann...

Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5. • Make sure to set the copy size to 100%. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo pape...

Placing information on copies Placing a header or footer on pages 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into ...

Canceling a copy job while pages are being printed 1 From the printer control panel, touch Cancel Job or press on the keypad. 2 Touch the job you want to cancel, and then touch Delete Selected Jobs . Note: If you press on the keypad, then touch Resume to return to the home screen. Understanding the ...

E-mailing Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents. Use the scanner glass for single pages, small items (such as postcards orphotos), transparencies, photo paper, or thin media (such as magazineclippings). You can use the printer to e ‑ mail scanned doc...

3 Enter the appropriate information, and then click Submit . Creating an e-mail shortcut Creating an e-mail shortcut using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP ...

E-mailing a document You can use the printer to e ‑ mail scanned documents to one or more recipients in a number of ways. You can type the e ‑ mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For mor...

Sending an e ‑ mail using the address book 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF tray. Place the...

3 From the home screen, navigate to: E-mail > Recipient(s) > type the e ‑ mail address > Done > Send as 4 Touch the button that represents the file type you want to send. • PDF —Create a single file with multiple pages. • Secure PDF —Create an encrypted PDF file that protects the file co...

Faxing Automatic document feeder (ADF) Scanner glass Use the ADF for multiple ‑ page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, smallitems (such as postcards or photos), transparencies, photo paper,or thin media (such as magazine clippi...

Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottomof each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity,or individual sending the message) and f...

Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack...

Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack...

Scenario 3: VoIP telephone service To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active. You may need to p...

Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port ...

Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. TheF port is for telephones. N F N Connect the printer to any of the N ports. PHONE LINE N F N 1 Connect one end of the telephone cable that...

3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices asshown. Note: Do not remove the adapter plug from the port of the printer if you are connecting to a serial or cascaded telephone system. Connecting to a distinctive ring service A distinctive...

Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numberssepa...

3 From the home screen, touch Fax . 4 Enter the fax number or a shortcut. Note: To add recipients, touch Next number , and then enter the recipient's telephone number or shortcut number, or search the address book. 5 Touch Fax It . Sending a fax using the computer The printer driver fax option lets ...

Creating shortcuts Creating a fax destination shortcut using the Embedded Web Server Assign a shortcut number to a single fax number or a group of fax numbers. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home sc...

• If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax . Notes: • This option blocks all incoming faxes that have a private caller ID or have no fax name. • In the Banned Fax List ...

3 From the Held Fax Mode menu, select one of the following: • Off • Always On • Manual • Scheduled 4 If you selected Scheduled, then continue with the following steps: a Click Fax Holding Schedule . b From the Action menu, select Hold faxes . c From the Time menu, select the time you want the held f...

Using the advanced options Select from the following settings: • Advanced Imaging —This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, and Sharpness settings before you fax the document. • Custom Job —This combi...

Scanning You can use the printer to send a file to an FTP address. You can type the e ‑ mail address, use a shortcut number, or use the address book. You can also use the Multi-send or MyShortcut application from the printer home screen. Formore information, see “Activating the home screen applicati...

Creating an FTP shortcut using the printer control panel 1 From the home screen, navigate to: FTP > FTP > type the FTP address > > type a name for the shortcut > Done 2 Verify that the shortcut name and number are correct, and then touch OK . Notes: • If the name or number is incorrec...

• The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: FTP > FTP > > type the name of the recipient > Search 4 Touch the name of the recipient. Note: To se...

4 Select a location on your computer where you want to save the scan image. 5 Type a scan name, and then a user name. Note: The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit . Note: Clicking Submit automatically assigns a shortcut number. You can use this...

3 Select your printer from the list. Note: To identify your printer, print a network setup page, and then look for “Fully Qualified Domain Name” in the TCP/IP section. 4 Click Next > Close . 5 Depending on your device, do either of the following:. • Press and hold the printer you want to configur...

Using the ScanBack Utility You can use the Lexmark ScanBack TM Utility instead of the Embedded Web Server to create scan ‑ to ‑ computer profiles. The ScanBack Utility can be downloaded from the Lexmark support Web site at http://support.lexmark.com . 1 Set up your scan ‑ to ‑ computer profile: a La...

Understanding the printer menus Menus list Paper Menu Reports Network/Ports Security Default SourcePaper Size/Type Configure MP Substitute Size Paper Texture Paper Weight Paper Loading Custom Types Custom Names 1 Custom Scan Sizes Universal Setup Menu Settings PageDevice Statistics Stapler Test Netw...

Paper menu Default Source menu Use To Default Source Tray [x]Multipurpose FeederManual PaperManual Envelope Set a default paper source for all print jobs. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for MultipurposeFee...

Use To Manual Paper Type Plain PaperCard StockTransparencyRecycledLabelsVinyl LabelsBondLetterheadPreprintedColored PaperLight PaperHeavy PaperRough/CottonCustom Type [x] Specify the paper type being manually loaded. Notes: • Plain Paper is the factory default setting. • From the Paper menu, set Con...

Substitute Size menu Use To Substitute Size OffStatement/A5Letter/A4All Listed Substitute a specified paper size if the requested paper size is not available. Notes: • All Listed is the factory default setting. All available substitutions areallowed. • Off indicates no size substitutions are allowed...

Use To Rough Envelope Texture Rough Specify the relative texture of the rough envelopes loaded. Letterhead Texture SmoothNormalRough Specify the relative texture of the letterhead loaded. Note: Normal is the factory default setting. Preprinted Texture SmoothNormalRough Specify the relative texture o...

Use To Rough/Cotton Weight LightNormalHeavy Specify the relative weight of the cotton or rough paper loaded. Note: Normal is the factory default setting. Custom [x] Weight LightNormalHeavy Specify the relative weight of the custom paper loaded. Notes: • Normal is the factory default setting. • The o...

Use To Heavy Loading DuplexOff Determine and set two-sided printing for all print jobs that specifyHeavy as the paper type. Rough/Cotton Loading DuplexOff Determine and set two-sided printing for all print jobs that specifyRough or Cotton as the paper type. Custom [x] Loading DuplexOff Determine and...

Custom Scan Sizes menu Use To Custom Scan Size [x] Scan Size NameWidthHeightOrientation PortraitLandscape 2 scans per side OffOn Specify a custom scan size name and page orientation. Notes: • The custom scan size name replaces Custom Scan Size [x] in the printermenus. • ADF Media Type is the factory...

Use To Feed Direction Short EdgeLong Edge Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than themaximum width supported in the tray. Reports Menu Reports menu Us...

Use To Print Directory Print a list of all the resources stored in an optional flash memory card or printerhard disk. Notes: • Job Buffer Size must be set to 100%. • Make sure the optional flash memory or printer hard disk is working andinstalled correctly. Asset Report Print a report containing ass...

Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status ConnectedDisconnected View the connection s...

Use To Enable BOOTP OnOff Specify the BOOTP address assignment setting. Note: On is the factory default setting. Enable AutoIP YesNo Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable FTP/TFTP YesNo Enable the built-in FTP server, which lets you send ...

Use To Auto Configuration OnOff Specify whether or not the wireless network adapter accepts theautomatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. View Hostname Set the host name. Note: These settings can be changed only from the Embedded Web S...

Use To View Security Mode View the encryption method for the wireless network. AppleTalk menu Note: This menu appears only in printer models that are connected to an Ethernet network or when an optional wireless network adapter is installed. To access the menu, navigate to either of the following: •...

Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. SMTP Setup menu Use To Primary SMTP Gateway Specify SMTP server gateway and port information. ...

Use To Device ‑ Initiated E ‑ mail NoneUse Device SMTP Credentials Specify what credentials will be used when communicating to the SMTPserver. Notes: • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail. • “Device Userid” and “Device password” are used ...

Use To Edit Access Controls Administrative MenusFunction AccessManagementSolutionsCancel jobs at the Device Control access to printer menus, firmware updates, held jobs, and other accesspoints. Miscellaneous Security Settings menu Use To Login Restrictions Login failuresFailure time frameLockout tim...

Use To LDAP Certificate Verification DemandTryAllowNever Allow the user to request a server certificate. Notes: • “Demand” means a server certificate is requested. If a bad certificate isprovided or if no certificate is provided, then the session is terminatedimmediately. “Demand” is the factory def...

Use To Verify Job Expiration Off1 hour4 hours24 hours1 week Set a limit on how long the printer stores print jobs needing verification. Reserve Job Expiration Off1 hour4 hours24 hours1 week Set a limit on how long the printer stores print jobs for printing at a later time. Note: Off is the factory d...

Use To Enable Authentication OnOff Change the authentication setting to On or Off. Note: Off is the factory default setting. Settings menu General Settings menu Use To Display Language EnglishFrancaisDeutschItalianoEspanolDanskNorskNederlandsSvenskaPortugueseSuomiRussianPolskiGreekMagyarTurkceCeskyS...

Use To Press and Hold Sleep Button Do NothingSleepHibernate Determine how the printer responds to a long press of the Sleepbutton when the printer is idle. Notes: • Do Nothing is the factory default setting. • Sleep or Hibernate sets the printer to operate at a lowerpower configuration. • If the pri...

Use To Color Dropout Color Dropout NoneRedGreenBlue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning and to adjust the dropout setting for eachcolor threshold. Notes: • None is the factory default setting for Color Dro...

Use To Ringer Volume OffOn Control the fax speaker ringer volume. Note: On is the factory default setting. Use To All RingsSingle Ring OnlyDouble Ring OnlyTriple Ring OnlySingle or Double Rings OnlySingle or Triple Rings OnlyDouble or Triple Rings Only Specify ring patterns when the printer is answe...

Use To Use cc:/bcc: OffOn Enable the use of the cc and bcc fields. Note: Off is the factory default setting. FTP Settings menu Use To Format PDF (.pdf)Secure PDF (.pdf)TIFF (.tif)JPEG (.jpg)XPS (.xps) Specify the format of the file for FTP sending. Note: PDF (.pdf) is the factory default setting. PD...

Flash Drive menu Scan Settings Use To Format PDF (.pdf)Secure PDFTIFF (.tif)JPEG (.jpg)XPS (.xps) Specify the format of the file to be sent through FTP. Note: “PDF (.pdf)” is the factory default setting. PDF Version 1.2–1.7A ‑ 1a Set the version of the PDF file to be sent through FTP. Note: 1.5 is t...

Print Settings Copies 1–999 Specify a default number of copies for each print job. Note: 1 is the factory default setting. Paper Source Tray [x]Multipurpose FeederManual PaperManual Envelope Set a default paper source for all print jobs. Note: Tray 1 is the factory default setting. Collate (1,1,1) (...

Paper Saver Orientation AutoLandscapePortrait Specify the orientation of a multiple ‑ page document. Note: Auto is the factory default setting. The printer chooses between portrait and landscape. Paper Saver Border NoneSolid Print a border on each page image. Note: None is the factory default settin...

Use To Print All Order AlphabeticalOldest FirstNewest First Specify the order in which held and confidential jobs are printedwhen Print All is selected. Note: Alphabetical is the factory default setting. Print jobs always appear in alphabetical order on the printer control panel. Finishing menu Use ...

Use To Run Stapler Test Print a report that confirms that the staple finisher is functioning properly. Note: This menu item appears only when a supported staple finisher is installed. Quality menu Use To Print Resolution 300 dpi600 dpi1200 dpi1200 Image Q2400 Image Q Specify the printed output resol...

Job Accounting menu Note: This menu item appears only when a formatted, working printer hard disk is installed. Make sure the printer hard disk is not read/write ‑ or write ‑ protected. Use To Job Accounting Log OffOn Determine and set if the printer creates a log of the print jobs it receives. Note...

Use To E ‑ mail Address to Send Logs Specify the e ‑ mail address to which the printer sends job accounting logs. Log File Prefix Specify the prefix you want for the log file name. Note: The current host name defined in the TCP/IP menu is used as the default log file prefix. Utilities menu Use To Re...

PCL Emul menu Use To Font Source ResidentDiskDownloadFlashAll Specify the set of fonts used by the Font Name menu. Notes: • “Resident” is the factory default setting. Resident shows the factorydefault set of fonts downloaded in the RAM. • “Flash” and “Disk” settings show all fonts resident in that o...

Use To Tray Renumber View Factory Defaults MPF Default = 8T1 Default = 1T1 Default = 4T1 Default = 5T1 Default = 20T1 Default = 21Env Default = 6MPaper Default = 2MEnv Default = 3 Display the factory default setting assigned to each tray or feeder. Tray Renumber Restore Defaults YesNo Restore all tr...

Use To Font Size 1–255 pt Set the default font size for HTML documents. Notes: • 12 pt is the factory default setting. • Font size can be increased in 1 ‑ point increments. Scale 1–400% Scale the default font for HTML documents. Notes: • 100% is the factory default setting. • Scaling can be increase...

Use To Orientation PortraitLandscapeReverse PortraitReverse Landscape Set the image orientation. Note: Portrait is the factory default setting. Help menu The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. Theycontain information about us...

Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impacton the environment. We design with the environment in mind, engineer our packaging to reduce materials, and providecollection and recycling programs. ...

Saving energy Using Eco ‑ Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbersseparated by periods, such as 123.123.123.123. • If you are using a proxy ser...

Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a documentis ready to print. There will be a short delay beforethe first page is printed. Off Use factory default settings. Note: This setting supports the performance spe...

Using Hibernate Mode Hibernate is an ultra ‑ low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser...

Using the printer control panel 1 From the printer control panel, navigate to: > Settings > General Settings > Timeouts > Hibernate Timeout 2 Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode. 3 Touch . Using Schedule Power Modes S...

Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Recycling Recycling Lexmark products To return Lexmark products for re...

Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Types of memory Description Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print ...

• Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailablefor other user tasks. 5 Touch Back > Exit Config Menu . The printer will perform a power ‑ on reset, and then return to normal operating mode. Configuring printer hard disk encryption Ena...

• A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printerwill return to the Enable/Disable screen. 5 Touch Back > Exit Config Menu . The printer will perform a power ‑ on reset, and then return to normal operating mode. Finding printer secur...

Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning the printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Dam...

Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Clean all the areas shown, and then let them dry. 1 White undersid...

Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies . Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are co...

Ordering toner cartridges Notes: • The estimated cartridge yield is based on the ISO/IEC 19752 standard. • Extremely low print coverage for extended periods of time may negatively affect actual yield. Item Return Program cartridge United States and Canada Toner Cartridge 601 High Yield Toner Cartrid...

Part name Lexmark Return Program Regular Imaging unit 500Z 500ZA Ordering staple cartridges Part name Part number Staple cartridges 35S8500 Ordering a maintenance kit Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pi...

Replacing supplies Replacing the toner cartridge 1 Press the button on the right side of the printer, and then open the front door. 2 Pull the toner cartridge out using the handle. 3 Unpack the toner cartridge, and then remove all packing materials. 4 Shake the new cartridge to redistribute the tone...

5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side railsinside the printer. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problem...

Replacing the staple cartridge 1 Open the stapler door. 2 Pull out the staple cartridge from the finisher. 3 Hold both sides of the empty staple case with your fingers, pull, and then lift the empty staple case from the cartridge. 1 2 3 Maintaining the printer 229

Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damag...

Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced systemsupport tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Secur...

Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoringthe factory default settings. For more information, see “Printing a menu settings page” on page 58. If you want a more comprehensive method of res...

Clearing jams Jam error messages appear on the printer display and include the area of the printer where the jam occurred. Whenthere is more than one jam, the number of jammed pages is displayed. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Inco...

• Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightlyagainst the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled...

[x]-page jam, remove all pages from the output bin. Leavepaper in bin. [45y.xx] Paper jam in the finisher bin 1 Empty the standard bin. 2 Move the paper guides to the sides. 3 Remove all jammed pages from inside the access areas. Note: Make sure all paper fragments are removed. Clearing jams 247

4 If necessary, touch Done from the printer control panel to clear the message and continue printing. Paper jam in the finisher rear door 1 Open the finisher rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Clearin...

5 Close the finisher rear door. 6 If necessary, touch Done from the printer control panel to clear the message and continue printing. Staple jam in the finisher 1 Open the staple access door. 2 Pull out the staple cartridge from the finisher. Clearing jams 250

Troubleshooting • “Understanding the printer messages” on page 253 • “Solving printer problems” on page 268 • “Solving print problems” on page 274 • “Solving copy problems” on page 299 • “Solving fax problems” on page 303 • “Solving scanner problems” on page 309 • “Solving home screen applications p...

Check tray [x] connection Try one or more of the following: • Turn off the printer, and then turn it back on. If the error occurs a second time, then: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the indicated tray. 4 Reattach the tray. 5 Connect the power cor...

Imaging unit nearly low [84.xy] If necessary, touch Continue on the printer control panel to clear the message and continue printing. Imaging unit very low, [x] estimated pages remain [84.xy] You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” secti...

• Update the network firmware in the printer or print server. For more information, visit the Lexmark support Website at http://support.lexmark.com . No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non ‑ Lexmark [supply type], see User’s Guide [...

Parallel port [x] disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Enable the parallel port. From the printer control panel, navigate to: Network/Ports > Parallel [x] > Parallel Buffer > Auto Note: The printer discards ...

Replace maintenance kit, 0 estimated pages remain [80.xy] The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact your service representative, and then report the message. Replace all originals if restarting job. Try...

Replace unsupported imaging unit [32.xy] Remove the imaging unit, and then install a supported one to clear the message and continue printing. For moreinformation, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide . Note: If you do not ha...

Too many trays attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Unformatted flash detected [53] Try one or more of the following: • From t...

Solving printer problems • “Basic printer problems” on page 268 • “Option problems” on page 270 • “Paper feed problems” on page 273 Basic printer problems The printer is not responding Action Yes No Step 1 Make sure the printer is turned on. Is the printer turned on? Go to step 2. Turn on the printe...

Printer display is blank Action Yes No Step 1 Press the Sleep button on the printer control panel. Does Ready appear on the printer display? The problem is solved. Go to step 2. Step 2 Turn off the printer, then wait for about 10 seconds, and then turn theprinter back on. Do Please wait and Ready ap...

Action Yes No Step 4 a Check if the internal option is selected. It may be necessary to manually add the internal option in the printerdriver to make it available for print jobs. For more information, see“Updating available options in the printer driver” on page 49. b Resend the print job. Does the ...

Cannot detect memory card Action Yes No Make sure the memory card is installed. a Install the memory card. For more information, see “Installing amemory card” on page 30. Note: Check if the memory card is securely connected to the printer controller board. b Print a menu settings page, and then chec...

Action Yes No Step 2 Check the cable and the USB or parallel interface card connection. Use the correct cable, and then make sure it is securely connected tothe USB or parallel interface card. Does the USB or parallel interface card operate correctly? The problem is solved. Contact customer support ...

Paper jam message remains after jam is cleared Action Yes No Check the entire paper path for jammed paper. a Remove any jammed paper. b From the printer control panel, touch Continue to clear the message. Does the paper jam message remain? Contact customer support . The problem is solved. Jammed pag...

Error message about reading the flash drive appears Action Yes No Step 1 Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port. Is the flash drive inserted into the front USB port? Go to step 2. Insert the flash dri...

Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Open the held jobs folder on the printer display, and then verify that yourprint job is l...

Print job takes longer than expected Action Yes No Step 1 Change the environmental settings of the printer. a From the printer control panel, navigate to: > Settings > General Settings b Select Eco ‑ Mode or Quiet Mode , and then select Off . Note: Disabling Eco-Mode or Quiet Mode may increase...

Job prints from the wrong tray or on the wrong paper Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. b Resend the print job. Did the job print from the correct tray or on the correct paper? The problem is solved. Go to step 2. Step 2 a From the Paper menu on ...

Tray linking does not work Notes: • The trays can detect paper length. • The multipurpose feeder does not automatically detect the paper size. You must set the size from the PaperSize/Type menu. Action Yes No Step 1 a Open the trays, and then check if they contain paper of the same sizeand type. • C...

Action Yes No Step 3 Reduce the complexity of the print job by eliminating the number and sizeof fonts, the number and complexity of images, and the number of pagesin the job. Did the job print and collate correctly? The problem is solved. Contact customer support . Unexpected page breaks occur Acti...

Action Yes No Step 2 a Use a font that is supported by the printer or install the font that youwant to use on your computer. For more information, contact yoursystem support person. b Resend the print job. Do prints still contain characters that have jagged or uneven edges? Contact customer support ...

Action Yes No Step 3 Replace the imaging unit, and then resend the print job. Is the printer still printing blank pages? Contact customer support . The problem is solved. Clipped pages or images Leading edge Trailing edge ABCDEABCDEABCDE Action Yes No Step 1 a Move the width and length guides in the...

Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge. 2 Remove the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 3 Install the imaging unit, and t...

Action Yes No Step 1 Load paper with the correct paper type and weight in the tray. Is paper with the correct paper type and weight loaded in the tray? Go to step 2. Load paper with thecorrect paper type andweight in the tray. Step 2 From the printer control panel, set the paper type and weight in t...

Action Yes No Step 2 Adjust the toner darkness to a lighter setting. a From the Quality Menu, select a lower value to reduce toner density. • 4 is the factory default setting. • If Print Mode is set to Black Only, then a setting of 5 increases tonerdensity and darkness for all print jobs. b Resend t...

Action Yes No Step 2 From the printer control panel, set the paper size in the Paper menu tomatch the paper loaded in the tray. Does the paper size match the paper loaded in the tray? Go to step 3. Do one or more of thefollowing: • Specify the papersize from the traysettings to matchthe paper loaded...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the paper still curled? Contact customer support . The problem is solved. Print irregularities ) ) ABCDE ABCDE A...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do print irregularities still appear? Go to step 6. The problem is solved. Step 6 Replace the imaging unit, and the...

Print is too dark Action Yes No Step 1 a From the Quality menu on the printer control panel, reduce the tonerdarkness. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Go to step 2. The problem is solved. Step 2 a From the printer control panel, set the pa...

Action Yes No Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the print still too dark? Go to step 6. The problem is solved. Step 6 Replace the imaging unit, and then resend ...

Action Yes No Step 4 Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? From the printercontrol panel, changethe texture settings inthe Paper Texturemenu to match thepaper you are printingon. Go to step 5. Step 5 a Load paper from a fresh package....

Action Yes No Step 1 a Move the width and length guides in the tray to the correct positionsfor the size of the paper loaded. b Resend the print job. Is the print still skewed? Go to step 2. The problem is solved. Step 2 a Check if you are printing on a paper that is supported by the tray. b Resend ...

Transparency print quality is poor Action Yes No Step 1 From the printer control panel, set the paper type in the Paper menu tomatch the paper loaded in the tray. Is the paper type for the tray set to Transparency? Go to step 2. Set the paper type toTransparency. Step 2 a Check if you are using a re...

Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print quality problems. 2 Install the imaging unit, and t...

Action Yes No Step 3 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Go to step 4. The problem is solved. Step 4 a Reinstall the imaging un...

Action Yes No Step 3 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure tolight may cause print qu...

Action Yes No Step 2 Replace the imaging unit, and then resend the print job. Does fog or shading appear on prints? Contact customer support at http://support.lexmark.com or your service representative. The problem is solved. Toner rubs off Leading edge Trailing edge ABC DEF Action Yes No Step 1 Fro...

• “Scanner unit does not close” on page 300 • “Poor copy quality” on page 301 • “Partial document or photo copies” on page 302 Copier does not respond Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the error or statusmes...

Poor copy quality Action Yes No Step 1 Check if an error or status message appears on the display. Does an error or status message appear? Clear the error or statusmessage. Go to step 2. Step 2 Check the quality of the original document. Is the quality of the original document satisfactory? Go to st...

Action Yes No Step 8 Check for patterns on print. a From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > select a lower setting b On the Copy screen, make sure no scaling is being selected. Do patterns appear on prints? Go to step 9. The problem is solved. St...

Action Yes No Step 2 Check if the paper size setting matches the size of the paper loaded in thetray. From the Paper menu on the printer control panel, check the PaperSize setting. Does the paper size setting match the size of the paper loaded in the tray. Go to step 3. Change the paper sizesetting ...

Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line issubscribed to the caller ID service. Notes: • If your region supports multiple caller ID patterns, then you mayhave to change the default setting. There are two settingsavailable: FSK (pattern 1) an...

Action Yes No Step 8 Temporarily disconnect other equipment (such as answering machines,computers with modems, or telephone line splitters) between the printerand the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? The problem is solved. Go to step 9. Step 9 a...

Action Yes No Step 2 Check the ring count delay settings. a Open a Web browser, and then type the printer IP address in theaddress field. Notes: • View the printer IP address on the printer home screen. The IPaddress appears as four sets of numbers separated by periods,such as 123.123.123.123. • If ...

Action Yes No Step 3 Set up the shortcut number properly. • Check if the shortcut number has been set for the telephone numberthat you want to dial. • Dial the telephone number manually. Can you send faxes? The problem is solved. Contact customer support . Received fax has poor print quality Action ...

Action Yes No Step 3 Replace the toner cartridge. When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax. Is the fax print quality satisfactory? The problem is solved. Contact customer support . Solving scanner problems • “The scanner does not respond” on page 309 • “Scan...

Action Yes No Step 5 Check if the printer is plugged into any surge protectors, uninterruptiblepower supplies, or extension cords. Is the printer plugged into any surge protectors, uninterruptible powersupplies, or extension cords? Connect the printerpower cord directly toa properly groundedelectric...

Action Yes No Step 5 From the Flash Drive menu, reduce the scan resolution settings, and thenresend the scan job. Does the job scan? The problem is solved. Go to step 6. Step 6 Check the scan settings. From the Scan screen, make sure the Content Type and Content Sourcesettings are correct for the do...

Poor scanned image quality Action Yes No Step 1 Check if an error message appears on the display. Is there an error message on the printer display? Clear the errormessage. Go to step 2. Step 2 Check the quality of the original document. Is the quality of the original document satisfactory? Go to ste...

Partial document or photo scans Action Yes No Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scannerglass in the upper left corner. Is the document or photo loaded correctly? Contact customer support . Load the document orphoto facedown on the...

Solving home screen applications problems An application error has occurred Action Yes No Step 1 Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in theaddress field. If you do not know the IP address of the printer, then you can: • View the IP ad...

Action Yes No Step 3 Check if the network connection is working. Is the network connection working? Go to step 4. Contact your systemsupport person. Step 4 Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came withthe ...

Notices Product information Product name: Lexmark MX610de, MX611de, and MX611dhe Machine type: 7016 Model(s): 630, 670, 675 Edition notice May 2013 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS ...

Trademarks Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered inthe United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the H...

Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 55 dBA Scanning 45 dBA Copying 56 dBA Ready N/A dBA Values are subject to change. See www.lexmark.com for current values. Temperature information Ambient operating temperature 15.6 to 32.2°C (60 to 90°F) Shi...

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zra č enje ka...

Sleep Mode This product is designed with an energy-saving mode called Sleep Mode . The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this productis not used for a specified period of time, called the Sleep M...

Licensing notices All licensing notices associated with this product can be viewed from the root directory of the installation software CD. 日本の VCCI 規定 製品にこのマークが表示されている場合、次の要件を満たしています。 この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いを...

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephoneline. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In mostbut not all areas, the sum of RENs should not exceed five (5.0). T...

recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device isconnected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’sLaboratories), another NRTL (Nationally Recognized Testing Laboratory...

Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, MillenniumTower III, 1095 Budapest H...

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitosesenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiiv...

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual PropertyRights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implementedin the product or service. The use of this product or serv...

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THATMAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NOWARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES,AND SERVI...

Index Numerics 250 ‑ sheet tray installing 44 550 ‑ sheet tray installing 44 Symbols [x]-page jam, remove all pages fromthe output bin. Leave paper in bin.[45y.xx] 247[x] ‑ page jam, clear manual feeder. [25y.xx] 244[x] ‑ page jam, clear standard bin. [20y.xx] 238[x] ‑ page jam, open automatic feede...