Lexmark 3500 - Manuals
Lexmark 3500 – Manual in PDF format online.
Manuals:
Manual Lexmark 3500
Summary
Contents Finding information about the printer..........................................................................9 Setting up the printer...................................................................................................12 Checking the box contents................................
Finding information about the printer Quick Setup sheet Description Where to find The Quick Setup sheet gives you instructions for setting up hardware and software. You can find this document in the printer box or on theLexmark Web site at www.lexmark.com . Getting Started booklet Description Where ...
Setting up the printer Checking the box contents Name Description 1 Black print cartridge Cartridges to be installed into the printer. Note: Cartridge combinations vary depending on the product purchased. 2 Color print cartridge 3 Power cord Attaches to the power supply port located at the back of t...
Installing another language control panel These instructions apply only if you received one or more additional language control panels with the printer. 1 Lift and remove the control panel (if one is installed). 2 Choose the correct control panel for your language. 3 Align the clips on the control p...
Networking the printer For complete networking information, please refer to the Getting Started booklet that came with the product. Installing the printer on a network Follow the instructions for the networking method you want to use. Make sure the selected network is set up andworking properly, and...
4 Align the edges of the internal wireless print server with the guides on the left and right, and then slide the wirelessprint server into the printer until it snaps into place. 5 Make sure the antenna points up. 6 Attach the adhesive label with the MAC address to the back of the printer. You will ...
Learning about the printer Understanding the parts of the printer Use the To 1 Paper support Load paper. 2 Wi-Fi indicator Check wireless status: • Off indicates that the printer is not turned on or that no wireless option is installed. • Orange indicates that the printer is ready for wireless conne...
Use the To 1 Scanner unit Access the print cartridges. 2 Print cartridge carrier Install, replace, or remove a print cartridge. 3 Lexmark N2050 (internal wireless print server) Connect the printer to a wireless network. Note: Only the 4500 Series comes with an internal wireless print server installe...
Press To 1 Start Color Start a color copy, scan, or photo print job, depending on which mode is selected. 2 Start Black Start a black-and-white copy, scan or photo print job, depending on which mode is selected. Using the Copy menu To access and navigate the Copy menu: 1 From the control panel, pres...
Use this To Copies* Specify how many copies to print. Resize* • Specify the percentage for enlarging or reducing the original copy. • Specify a specific copy size. • Create a multiple-page poster. Lighter / Darker* Adjust the brightness of a copy. Quality* Adjust the quality of a copy. Paper Setup S...
Use this To Quality* Adjust the quality of a scan. Original Size* Specify the size of the original document. * Temporary setting. For information on saving temporary and other settings, see “Saving settings” onpage 25. Using the Photo Card menu 1 If necessary, press Photo Card , or insert a memory c...
Saving Paper Size, Paper Type, and Photo Size settings 1 From the control panel, press Settings . 2 Press or repeatedly until Paper Setup appears. 3 Press . 4 Press or repeatedly until Paper Size appears. 5 Press . 6 Press or repeatedly until the size you want appears. 7 Press . 8 Press to go to the...
The message, PictBridge camera detected. Press to change settings. appears on the display. 2 Press or repeatedly until the menu item you want appears. 3 Press . 4 Press or repeatedly until the submenu item you want or the setting you want appears. 5 Press . Note: Pressing selects a setting. An * app...
Saving settings In a setting menu, an * appears next to the default setting. To change the setting: 1 Press or repeatedly until the setting you want appears. 2 Press : • To save most settings. An * appears next to the saved setting. • To select a temporary setting. An * appears next to the selected ...
Learning about the software This chapter tells how to use the printer with Windows operating systems. If you are using a Macintosh operatingsystem, see the Mac Help: 1 From the Finder desktop, double-click the Lexmark 3500-4500 Series folder. 2 Double-click the printer Help icon. Using the printer s...
Click To Details View/Print Photo Library Browse, print, or share your photos. Transfer Photos Download photos from a memory card, flashdrive, CD, or PictBridge-enabled digitalcamera to the Photo Library. Photo Greeting Cards Make quality greeting cards from your photos. Photo Packages Print multipl...
From here You can Advanced • Change the appearance of the Printing Status window. • Turn printing voice notification on or off. • Change network printing settings. • Share information with us regarding how you use the printer. • Obtain software version information. • View ink levels and order new pr...
Tab Choices Paper Setup • Select a Paper Size for Paper, Envelope, Banner, orBorderless. • Select an Orientation of Portrait or Landscape. Print Layout • Select a Layout of Normal, Banner, Mirror, N-up,Poster, Booklet, or Borderless. • Select a duplexing preference on how the sheets areflipped. Usin...
Click To Quick Print an entire Web page in draft quality. Black and White Print an entire Web page in black and white. Text Only A Print only the text of a Web page. Photos Print only the photos or images on a Web page. Note: The number of photos or images valid for printing appears next to Photos. ...
Loading paper and original documents Loading paper 1 Make sure: • You use paper designed for inkjet printers. • If you are using photo, glossy, or heavyweight matte paper, you load it with the glossy or printable side facingyou. (If you are not sure which side is the printable side, see the instruct...
Load up to Make sure 20 sheets of banner paper • You remove all the paper from the paper support before loading thebanner paper. • You tear off only the number of pages needed to print the banner. • You place the required stack of banner paper on the top cover. • The leading edge of the banner paper...
Printing Printing a document 1 Load paper. 2 With a document open, click File Print . 3 Click Properties , Preferences , Options , or Setup . 4 Adjust the settings. 5 Click OK . 6 Click OK or Print . Printing high-quality graphics 1 Load paper. 2 With your image open, click File Print . 3 Click ...
4 If you want to view the Web page before printing: a Click Preview . b Use the toolbar options to scroll between pages, zoom in or out, or select whether to print text and imagesor text only. c Click: • Print or • Close , and continue to step 5. 5 If needed, select a print option from the Toolbar: ...
4 From the Print Layout tab, select N-up . 5 Select the number of pages to print on each page. 6 If you want each page image to be surrounded by a border, select Print Page Borders . 7 Click OK . 8 Click OK or Print . Printing files from a memory card or flash drive Notes: • To print Microsoft Offic...
Working with photos • Make sure that the printer settings are set correctly for the photos you wish to print. For information on how toset photo print settings, see “Using the Photo Card menu” on page 21. • The following print settings will return to the factory default settings when a memory card o...
Warning: Do not touch cables, any network adapter, the memory card, or the printer in the area shown while actively printing, reading, or writing from a memory card. A loss of data can occur. Also, do not remove a memorycard while actively printing, reading, or writing from a memory card. When the p...
Note: The printer recognizes one active media device at a time. If you insert a memory card and a flash drive, a message appears on the display prompting you to designate the device you want the printer to recognize. Transferring photos from a memory device to the computer using the controlpanel If ...
Transferring selected photos from a CD or flash drive using the computer 1 Insert a CD into the computer or a flash drive into the printer. For more information, see “Inserting a flash drive”on page 45. The Lexmark Imaging Studio software launches automatically on your computer. 2 If you are using W...
Notes: • If photos on the memory card were taken on more than one date, selections will include Last Date and Date Range . • To choose a date range, press and then press or repeatedly until the desired date is displayed. Date ranges are displayed by month and year starting with the most recent month...
15 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34. Note: Make sure the paper matches the size you selected on the proof sheet. 16...
10 Press Start Color or Start Black . The print settings used on the print job are displayed one at a time on the second line of the display. 11 Press Start Color or Start Black again. Printing photos by date range 1 Load photo paper with the glossy or printable side facing you. (If you are not sure...
Printing photos from a digital camera using DPOF Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF,you can specify which photos to print, how many of each, and print settings while the memory card is still in thecamera. The printer recogni...
Notes: • Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, seethe camera documentation. • The printer recognizes one active media device at a time. If you insert more than one media device, amessage appears on the display prompting you to designate...
Printing photos from a media device using the computer 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34. 2 Insert a CD or media d...
3 From the Style tab, click to select a style for your greeting card. 4 From the Photo tab, select and drag a photo into the preview pane on the right side of the screen. 5 Click the text area to be able to add text to your photo greeting card. 6 When you have finished editing your text, click OK . ...
11 From the Share tab, click Print your slideshow if you want to print your slideshow. 12 From the Quality drop-down list, select a copy quality. 13 From the Paper Size in Printer drop-down list, select the paper size. 14 To select multiple prints of a photo, or to select photo sizes other than 4 x ...
Copying Note: If you want to customize copy settings, see “Using the Copy menu” on page 19. Making a copy 1 Load paper. 2 Load an original document facedown on the scanner glass. 3 From the control panel, press Copy Mode . 4 Press Start Color or Start Black . Adjusting copy quality Quality specifies...
Copying photos 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printableside, see the instructions that came with the paper.) 2 Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading originaldoc...
8 Press . 9 Press or repeatedly until Paper Setup appears. 10 Press . 11 Press or repeatedly until Paper Size appears. 12 Press . 13 Press or repeatedly until the size you want appears. 14 Press . 15 Press or repeatedly until Paper Type appears. 16 Press . 17 Press or repeatedly until either Automat...
3 From the control panel, press Copy Mode . 4 Press . 5 Press or repeatedly until Collate appears. 6 Press . 7 Press or repeatedly until On appears. Note: You can collate copies only if you did not make any changes in the Resize menu. 8 Press Start Color or Start Black . Note: If you are using the s...
6 Press . 7 Press or repeatedly until the setting you want appears. Notes: • If you select Custom Resize , press and hold or until the size you want appears and press . • If you select Borderless , the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on th...
Copying a photo using the computer 1 Place the photo facedown on the scanner glass. 2 From the desktop, double-click the Lexmark Imaging Studio icon. 3 From the left pane of the Welcome screen, click Copy . 4 Select Photo . 5 Click Start . The photo appears in the right pane. 6 From the Quality drop...
Scanning Note: If you want to customize scan settings, see “Using the Scan menu” on page 20. Scanning a document 1 Make sure the printer is connected to a computer, and both the printer and the computer are on. 2 Load an original document facedown on the scanner glass. 3 From the control panel, pres...
4 Select the Several Photos option. 5 Click Start . Scanning documents or images for e-mailing You can e-mail attached images using your default e-mail application. 1 Load an original document facedown on the scanner glass. 2 From the desktop, double-click the Lexmark Imaging Studio icon. 3 Click E-...
10 From the drop-down list, select the patterns to be removed. 11 To reduce stray marks on color photos, click the check box, and then move the slider to the desired value. 12 Click OK . The thumbnail is updated. Customizing scan settings using the computer 1 From the desktop, double-click the Lexma...
Faxing Make sure: • The printer is connected to a computer that is equipped with a fax modem. • The computer is connected to a working phone line. • Both the printer and the computer are turned on. Sending a fax using the software You can scan a document to the computer and then fax it to someone us...
Receiving a fax automatically 1 From the desktop, double-click the Lexmark Imaging Studio icon. 2 From the Settings area in the left pane of the Welcome screen, click Setup and manage faxes . 3 From the “I Want To” menu, click Adjust speed dial list and other fax settings . 4 Click the Ringing and A...
Maintaining the printer Changing print cartridges Removing a used print cartridge 1 Make sure the printer is on. 2 Lift the scanner unit. The print cartridge carrier moves and stops at the loading position, unless the printer is busy. 3 Press down on the cartridge carrier lever to raise the cartridg...
Achieving better print quality Improving print quality If you are not satisfied with the print quality of a document, make sure you: • Use the appropriate paper for the document. If you are printing photos or other high quality images, for bestresults use Lexmark Premium Photo Paper or Lexmark Photo...
5 Press or repeatedly until Clean Cartridges appears. 6 Press . A page prints, forcing ink through the print cartridge nozzles to clean them. 7 Print the document again to verify that the print quality has improved. 8 If print quality has not improved, try cleaning the nozzles up to two more times. ...
10 Repeat step 9 up to two more times. 11 If print quality is still not satisfactory, replace the print cartridges. Preserving the print cartridges • Keep a new cartridge in its packaging until you are ready to install it. • Do not remove a cartridge from the printer except to replace, clean, or sto...
Item Part number Color cartridge 2 Black cartridge 3 Photo cartridge 31 Ordering paper and other supplies To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com . Notes: • For best results, use only Lexmark print cartridges. • For best results when printing photos or...
If you receive an Out of Original Lexmark Ink message, the original Lexmark ink in the indicated cartridge (s) has been depleted. If you believe you purchased a new, genuine Lexmark print cartridge, but the Out of Original Lexmark Ink message appears: 1 Click Learn More on the message. 2 Click Repor...
Troubleshooting • “Setup troubleshooting” on page 77 • “Print troubleshooting” on page 81 • “Copy troubleshooting” on page 86 • “Scan troubleshooting” on page 88 • “Jams and misfeeds troubleshooting” on page 90 • “Memory card troubleshooting” on page 92 • “Error messages” on page 94 • “Resetting to ...
Reinstall the software 1 Turn off and then restart your computer. 2 Click Cancel on all New Hardware Found screens. 3 Insert the CD, and then follow the instructions on the computer screen to reinstall the software. Reconnect power supply 1 Press to turn the printer off. 2 Disconnect the power cord ...
Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the cartridges. Check printer default and pause settings 1 Click: • In Windows XP (default Start menu): Start Printers and Faxes . • In Windows XP (Classic Start menu): Start Settin...
Make sure the camera is a PictBridge-enabled digital camera 1 Disconnect the camera. 2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation todetermine whether it is PictBridge-enabled. Check USB cable Use only the USB cable that came with the came...
5 Press or repeatedly until Photo Size appears. 6 Press . 7 Press or repeatedly until 4 x 6 in. or 10 x 15 cm appears. 8 Press . 9 Press or repeatedly until Paper Setup appears. 10 Press . 11 Press or repeatedly until Paper Size appears. 12 Press . 13 Press or repeatedly until 10 x 15 cm appears. 14...
3 Remove and reinsert the print cartridges. For more information, see “Removing a used print cartridge” onpage 70 and “Installing print cartridges” on page 70. If print quality has not improved, continue to step 4. 4 Wipe the print nozzles and contacts. For more information, see “Wiping the print ca...
Poor quality at the edges of the page These are possible solutions. Try one or more of the following: Check minimum print settings Unless you are using the borderless feature, use these minimum print margin settings: • Left and right margins: – 6.35 mm (0.25 in.) for letter size paper – 3.37 mm (0.1...
Are you printing a large file? The ink levels displayed in the printer software are not updated during a print job; they represent the ink level at thebeginning of a print job. The ink levels may seem inconsistent in the Printing Status window when you are printinga large file. Ink levels seem to go...
Poor copy quality • Blank pages • Checkerboard pattern • Distorted graphics or pictures • Missing characters • Faded print • Dark print • Skewed lines • Smudges • Streaks • Unexpected characters • White lines in print These are possible solutions. Try one or more of the following: Check messages If ...
Partial document or photo copies These are possible solutions. Try one or more of the following: Check document placement Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner. Check paper size Make sure the paper size being used matches the size you select...
4 Click Custom Settings . 5 Select a higher scan resolution. 6 Click Start . Review steps to improve print quality See “Improving print quality” on page 72. Are you scanning from photo or glossy paper, a magazine, or a newspaper? If you are copying or scanning from photo or glossy paper, a magazine,...
3 Press to turn the printer back on. Paper jam in the paper support 1 Press to turn off the printer. 2 Firmly grasp the paper, and gently pull it out. 3 Press to turn the printer back on. Paper or specialty media misfeeds These are possible solutions if paper or specialty media misfeeds or skews, or...
Check media loading • Verify that the specialty media is loaded correctly. For more information, see “Loading various paper types” onpage 34. • Try loading one page, envelope, or sheet of specialty media at a time. Check printer default and pause settings 1 Click: • In Windows XP (default Start menu...
Memory card cannot be inserted There are possible solutions. Try one or more of the following: Check memory card type Make sure that the type of memory card you are using can be used in the printer. For more information, see “Insertinga memory card” on page 44. Check memory card placement Make sure ...
Error messages Alignment Error These are possible solutions. Try one or more of the following: Remove tape from print cartridge 1 Remove the print cartridge. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the cartridge. 4 Press to align the cartridge. For more information, see “A...
5 Reinsert the black (or photo) print cartridge. 6 If the error: • Reappears, replace the black (or photo) print cartridge with a new one. • Does not reappear, reinsert the color print cartridge. 7 If the error reappears, replace the color print cartridge with a new one. Clear Carrier Jam These are ...
10 Reinstall the print cartridges. For more information, see “Installing print cartridges” on page 70 11 Close the scanner unit. 12 Plug the power cord into the wall outlet. 13 Press to turn the printer on. 14 Reinstall the print cartridges. For more information, see “Installing print cartridges” on...
Left Cartridge Error / Right Cartridge Error This message may also appear as Error 1205 (Left Cartridge) or Error 1206 (Right Cartridge). 1 Remove the indicated print cartridge. 2 Disconnect the power cord from the electrical outlet. 3 Reconnect the power cord to the electrical outlet. 4 If the butt...
Select the After Dial setting 1 From the desktop, double-click the Lexmark Imaging Studio icon. 2 From the left pane of the Welcome screen, click Setup and manage faxes. 3 Click Adjust speed dial list and other fax settings . 4 Click the Dialing and Sending tab. 5 From the “Sending options” area, se...
Photo size error. Photo must fit on page. There are one or more photos larger than the paper size you selected on the printer menu. 1 Press to clear the error message. 2 Press or repeatedly until Paper Size appears on the display. 3 Press . 4 Press or repeatedly to select the paper size option that ...
Note: Resetting to factory default settings will delete all printer settings you selected. 1 Press to turn off the printer. 2 Press and hold the Settings and Start Color buttons at the same time, then press again to turn the printer back on. Language appears on the display, indicating that the print...
Notices Product name: Lexmark 3500 Series Machine type: 4431 Model(s): 001, 003 Product name: Lexmark 4500 Series Machine type: 4431 Model number 2: W02, W0E, W0J, W12, W1E, W1J Edition notice March 2007 The following paragraph does not apply to any country where such provisions are inconsistent wit...
ENERGY STAR Power consumption Product power consumption The following table documents the power consumption characteristics of the product. Note: Some modes may not apply to your product. Mode Description Power consumption (Watts) Printing The product is generating hard-copy output fromelectronic in...
Index A Advanced tab 30aligning print cartridges 72alignment error 94 B banner paper jams 92banner paper, loading 37black ink low 94borderless copying using the control panel 58 box contents 12buttons, control panel Back 18Cancel 18Copy Mode 18Left arrow 18Lighter / Darker 18Menu 18Photo Card 18Powe...
Lexmark Manuals
-
Lexmark 47B1001
Manual
-
Lexmark 34S0700
Manual
-
Lexmark 40G0410
Manual
-
Lexmark 2400
Manual
-
Lexmark 332
Manual
-
Lexmark X782
Manual
-
Lexmark 386
Manual
-
Lexmark X65x
Manual
-
Lexmark 16M1994
Manual
-
Lexmark DD-2000
Manual
-
Lexmark 4600 Series
Manual
-
Lexmark xd2
Manual
-
Lexmark 220
Manual
-
Lexmark C782dn XL
Manual
-
Lexmark E350D, E352DN
Manual
-
Lexmark 5300 Series
Manual
-
Lexmark X642
Manual
-
Lexmark 28D0550
Manual
-
Lexmark 35ST891
Manual
-
Lexmark C77x
Manual