La Crosse Technology WT-5431 - Manuals

5 Battery Cover DETAILED SET-UP GUIDE Important: Insert batteries into the sensor first, then into the alarm clock. Do not press any buttons until remote temperature is displayed. II. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cover. Observing the correct polarity, insta...

6 is found during this period, the tower icon will not appear and the clock will search again at 12:00 am the next night. 6. Either wait for the WWVB reception or manually set the time and date, making sure to set the correct time zone. III. PROGRAM MODE To enter the Program Mode hold down the “SET”...

9 IV. FEATURES & OPERATIONS A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8. Adjustable snooze B. RADIO-CONTROLLED T...

11 defect, but simply reflects the difference in measuring methods. The remote temperature is designed for changing temperature at a wide range. F. REMOTE TEMPERATURE 1. The projection alarm comes with a remote temperature sensor. When set up properly, the projection alarm will receive and display t...

13 V. MOUNTING THE REMOTE TEMPERATURE SENSOR The Remote Temperature Sensor can be mounted in two ways: 1) with the use of screws, or 2) using the adhesive tape. A. MOUNTING WITH SCREWS 1. Remove the mounting bracket from the Remote Temperature Sensor. The bracket should snap off easily. 2. Place the...