JVC UX-J60 - Manuals - manualsarea.com

Page 2 - Warnings, Cautions and Others; CAUTION

G-1 Warnings, Cautions and Others CAUTION—STANDBY/ON button! Disconnect the mains plug to shut the power off completely (theSTANDBY/ON lamp goes off). The STANDBY/ON button in any position does not disconnect the mains line.• When the unit is on standby, the STANDBY/ON lamp lights red.• When the uni...

Page 3 - Side view; IMPORTANT FOR LASER PRODUCTS; REPRODUCTION OF LABELS

G-2 10 cm 15 cm 15 cm 1 cm 1 cm 15 cm 15 cm 15 cm Front view CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown...

Page 4 - Introduction; About This Manual; Installation; We would like to thank you for purchasing one of our JVC products.; Power sources

1 Introduction About This Manual This manual is organized as follows:• The manual mainly explains operations using the buttons on the remote control.You can use the buttons both on the remote control andon the main unit for the same operations if they havethe same or similar names (or marks), unless...

Page 5 - Contents

2 Contents Location of the Buttons and Control ..................................... 3 Front Panel ........................................................................................... 3Remote Control .................................................................................... 5 Gettin...

Page 6 - Location of the Buttons and Control; Become familiar with the buttons and control on your unit.; Front Panel

3 Front Panel U X - J 6 0 1 2 3 4 8 9 p q e r y u i t w 5 6 7 MICRO COMPONENT SYSTEM FOR UX-J50: FOR UX-J50: Location of the Buttons and Control Become familiar with the buttons and control on your unit. Front Panel EN01-13_UX-J60&50[A]f.pm6 03.2.25, 5:08 PM 3

Page 7 - Pressing this button also turns on the unit.; Display Window; ST

4 Front Panel 1 Disc tray 2 Display window 3 REV.MODE (reverse mode) button (17 – 19) 4 AUX button (9)Pressing this button also turns on the unit. 5 STANDBY/ON button and STANDBY/ON lamp (9, 21) 6 REC (recording) button (18, 19) 7 Multi operation buttons• DOWN/ 4 (reverse skip), 7 (stop) and ¢ (forw...

Page 8 - Remote Control

5 See the pages in parentheses for details. 1 Number buttons 2 BASS button (10) 3 Multi operation buttons• UP, 4 (reverse skip), 7 (stop), ¢ (forward skip), and DOWN 4 SET button (15) 5 Source buttons• CD 3 / 8 , TAPE 2 3 , FM/AM, and AUX Pressing one of these buttons also turns on the unit. 6 CD 0 ...

Page 9 - Getting Started; Supplied Accessories; If anything is missing, consult your dealer immediately.; Putting the Batteries into the Remote Control; Connecting Antennas; FM antenna; Attach the FM antenna to the FM 75; About the supplied FM antenna; To connect an outdoor FM antenna

6 Getting Started Supplied Accessories Make sure that you have all the following items.The number in parentheses indicates the quantity of eachpiece supplied. • AM loop antenna (1)• FM antenna (1)• Remote control (1)• Batteries (2)• Speaker cords (ONLY FOR UX-J60) (4) If anything is missing, consult...

Page 10 - To connect an outdoor AM antenna; For better reception of both FM and AM; AM antenna; Connecting Speakers

7 INPUT INPUT INPUT INPUT RIGHT LEFT MAIN SPEAKERS CAUTION: SPEAKER IMPEDANCE 6 -16 SUBWOOFERS RIGHT LEFT 1 If the cords are covered with insulation,remove a short section of insulation at theend of each cord by twisting and pulling itoff. 2 Connect the AM loop antenna to the AMLOOP terminals as ill...

Page 11 - to; Release your finger from the clamp.; To remove the speaker grilles; The speaker grilles are removable.; Connecting Other Equipment; To connect an audio equipment

8 R L AUX L R L R Speaker grille To remove the speaker grille, insert your fingers at the topof the speaker grille, pull towards you. Then pull the bottomtowards you. To attach the speaker grille, put the projections of thespeaker grille into the holes of the speaker. Holes Projections 1 If the cord...

Page 12 - Common Operations; Setting the Clock; To check the clock time during play; • When you unplug the AC power cord or if a power failure; To change the clock; Turning On the Power

9 Common Operations Setting the Clock Before operating the unit any further, first set the unit’s clock.When you plug the AC power cord into the wall outlet,“0:00” starts flashing on the display.You can set the clock whether the unit is on or off.• There is a time limit in doing the following steps....

Page 13 - Adjusting the Volume; On the remote control:; For private listening; Enjoying Sound Effects; To reinforce the bass sound; AHB OFF

10 Adjusting the Volume You can adjust the volume level only while the unit is turnedon. The volume level can be adjusted between “VOL MIN”and “VOLUME 1” – “VOLUME 40 (VOL MAX).” On the remote control: Press VOLUME + to increase the volume orpress VOLUME – to decrease it. On the unit: Turn VOLUME + ...

Page 14 - sound of monaural sources.; Selecting the Illumination Brightness; On the remote control ONLY:

11 Selecting the Display Color (ONLY FOR UX-J60) You can select the display color (COLOR 1 – COLOR 5 andAUTO mode).• AUTO mode changes the color (COLOR 1 to COLOR 5) gradually. To select the color, press COLOR.• Each time you press the button, the color changes as follows: COLOR AUTO COLOR 1 COLOR 2...

Page 15 - Listening to FM and AM Broadcasts; Tuning in to a Station; Press and hold; To stop searching, press; When you press; To change the FM reception mode; Presetting Stations; Tune in to the station you want to preset.

12 Listening to FM and AM Broadcasts Tuning in to a Station 1 Press FM/AM to select the band. The unit automatically turns on and tunes into the previously received station—either FMor AM.• Each time you press the button, the band alternates between FM and AM. 2 Press and hold ¢ or 4 for more than 1...

Page 16 - Tuning in to a Preset Station

13 Tuning in to a Preset Station On the remote control ONLY: 1 Press FM/AM to select the band. The unit automatically turns on and tunes into the previously received station—either FMor AM.• Each time you press the button, the band alternates between FM and AM. 2 Press UP or DOWN to select apreset n...

Page 17 - Playing Back Discs; General notes; Playing Back the Entire Disc—Normal Play; Press CD; To stop playing, press; • If the disc cannot be read correctly (because it is scratched,; • If the loaded disc has more than 21 tracks and you select 21st

14 Playing Back Discs This unit has been designed to play back the following discs—CD, CD-R, and CD-RW. When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recordable) and CD-RWs(CD-ReWritable) can be played only if they are already“finalized.”• Usually you can play back your original CD-Rs or CD- RW...

Page 18 - Basic Disc Operations; To stop playing for a moment; To resume playing, press CD; To go to another track; To locate a particular point in a track; Repeat step; If you try to program a 21st track; To check the program contents

15 Basic Disc Operations While playing a disc, you can do the following operations. To stop playing for a moment During play, press CD 3 / 8 . While pausing, the elapsed playing time flashes onthe display. To resume playing, press CD 3 / 8 again. To go to another track Before or during play, press ¢...

Page 19 - Repeating Tracks—Repeat Play; Prohibiting Disc Ejection—Tray Lock; If you try to eject the disc while Tray Lock is in use; To modify the program; Playing at Random—Random Play; ALL

16 Repeating Tracks—Repeat Play You can have all the tracks, the program or individual trackcurrently playing, repeat as many times as you like. On the remote control ONLY: To repeat playing, press REPEAT before orduring play.• Each time you press the button, Repeat Play changes as follows, and the ...

Page 20 - Playing Back Tapes; Playing Back a Tape; Press PUSH OPEN; If no cassette is inserted when you press TAPE; To play both sides—Reverse Mode

17 Playing Back Tapes You can play back type I tapes. Playing Back a Tape 1 Press PUSH OPEN 0 on the unit. 2 Put a cassette in with the exposed part ofthe tape down. 3 Press PUSH OPEN 0 again to close the cassette holder. 4 Press TAPE 2 3 . The unit automatically turns on and thetape starts playing....

Page 21 - Recording; Recording on a Tape; • If no cassette is inserted when you press REC; • If a protected tape is inserted when you press REC; To stop while recording, press; To record on both sides—Reverse Mode; or; To protect your recording; At the start and end of cassette tapes

18 Recording Recording on a Tape On the unit ONLY: 1 Put a recordable cassette in with theexposed part of the tape down. 2 Close the cassette holder gently and checkthe recording direction for the tape. • If the tape direction is not correct, press TAPE 2 3 twice then 7 to change the tape direction....

Page 22 - Disc Direct Recording; One Track Recording; Repeat steps

19 Disc Direct Recording Everything on the disc goes onto the tape in the order it is onthe disc, or according to the order you have set in ProgramPlay. On the unit ONLY: 1 Put a recordable cassette in with theexposed part of the tape down. 2 Load a disc. • If the current playing source is not the C...

Page 23 - Using the Timers; Using Daily Timer and Recording Timer; How the timer actually works

20 Using the Timers There are three timers available—Daily Timer, RecordingTimer, and Sleep Timer.Before using the timers, you need to set the unit’s clock (seepage 9). Using Daily Timer and Recording Timer You can set the timer whether the unit is on or off. How the timer actually works When the on...

Page 24 - Adjust the clock if you need.; • If the unit is turned on when the timer on-time comes; Using Sleep Timer; How the Sleep Timer actually works; • If you set the Sleep Timer after the Daily Timer starts playing

21 5 Press UP or DOWN to set the volume level,then press CLOCK/TIMER. • You can select the volume level (“VOLUME – –” and “VOLUME 0” to “VOLUME 40”).If you select “VOLUME – –,” the volume is set to theprevious level when the unit was turned off. • To turn off the volume while the Recording Timer ( R...

Page 25 - Maintenance; Handling cassette tapes; • Stains on the unit

22 Maintenance Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one ofthe reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Be careful not to touch the tape surface. • Avoid storing tapes in t...

Page 26 - Troubleshooting; Symptom

23 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service.If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,such as your dealer, for service. Symptom No s...

Page 27 - Specifications; Design and specifications are subject to change without notice.

24 Specifications Design and specifications are subject to change without notice. UX-J60 (CA-UXJ60 and SP-UXJ60) Amplifier Output Power: SUBWOOFERS: 90 W (45 W + 45 W) at 6 Ω (10% THD) MAIN SPEAKERS: 30 W (15 W + 15 W) at 6 Ω (10% THD) Audio input sensitivity/Impedance (at 1 kHz) AUX: 400 mV/48 k Ω ...