Intel 8205 - Manuals - manualsarea.com

Page 2 - First Edition

Copyright © 2000, Intel® Corporation. All rights reserved.Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update theinformation contained herein. * Other p...

Page 3 - Contents; Quick Start

1 Install the Router Hardware ............... 2 Select a Scenario ............................... 3 2 1 Contents Quick Start Scenario Descriptions .................................... 4 Firewall Filters and NAT ............................... 10 Using the VPN Option ....................................

Page 4 - Install the Router Hardware

2 00AA00D1865D 12 3 4 5 6 7 8 9 MAC ADDRESS CASE ASSY Power Hub II PC X Recovery Input 5.1VDC/2.6A Console LAN 1 10 / 100 Mbps LAN 2 10 Mbps Connect the LAN 1 port to yourlocal network 1 Connect the LAN 1 port to the local network or the Ethernet port of a PC, using the provided blue cable. 2 Set th...

Page 5 - Select a Scenario

3 2 Select a Scenario Select a Scenario This guide describes four scenarios in which you can connect the router to the Internet through a DSL or cable modem. Scenario 1: Router is the DHCPServer In this scenario, the LAN PCs are config- ured as DHCP clients, and you do not need to do any configurati...

Page 6 - Scenario 1; Scenario Descriptions

4 LAN PCs Get IP Address fromDHCP Server on Router The default IP address on the routers LAN 1 port is 192.168.1.1. The router automatically assigns IP addresses sequentially to the hosts (PCs and servers, for example) on your LAN, using the address range from 192.168.1.2 to 192.168.1.254. The ...

Page 7 - Install Intel

5 Figure 7. Intel Device View Installation. Choose Installfor Windows, then follow the screen instructions in theinstallation wizard. We recommend using Intel ® Device View (manage- ment software provided with the router) to configure the router for scenarios 2, 3, and 4. Intel Device View manages a...

Page 8 - Scenario 2

6 Scenario Descriptions Scenario 2 Connecting to a CableModem If you are connecting the LAN 2 port to a cable modem for Internet access, some ISPs require that you configure a name to identify the router. Check your Internet subscription to see if your ISP requires this setting. The name of this set...

Page 9 - Scenario 3

7 Figure 12. Disable the router’s DHCP server. Scenario Descriptions 7070 PC WAN Power Hub II PC X LAN 1 10 / 100 Mbps Recovery Input 5.1VDC/2.6A Console 00AA00D1865D 12 3 4 5 6 7 8 9 MAC ADDRESS CASE ASSY 10 Mbps LAN 2 Set this switch to “PC” DSL/cable modem Internet Existing DHCP Server on theLAN ...

Page 11 - Scenario 4

9 Scenario Descriptions Intel ® Router ® Intel Router Status LAN WAN Link WAN Switch WAN Control Test Mode 100 Mbps xDSL/Cable modem LAN 2 port gets static IP address from ISP LAN 1 port connects to the local network using this IP address: 192.168.1.1 7072 PC PC E-mail Server 192.168.1.10 Internet u...

Page 12 - Firewall Filters and NAT

10 Firewall Filtering and NAT forServers on the LAN This section describes how to set up firewall filters and NAT (network address translation) for servers onyour LAN, using the LAN 2 port setup wizard. Create firewall filters for LAN users For added security, you can enable firewall filtering on th...

Page 13 - Setting up a VPN Tunnel; Using the VPN Option

11 Figure 19. Configuring a VPN Tunnel. SelectConnection Setup from the Configuration menu. Figure 20. Connection Setup. To create a VPN tunnel,select Add Tunnel from the Port/Connection list and clickAdd Tunnel. Setting up a VPN Tunnel A VPN (virtual private network) tunnel is a connec- tion to a r...

Page 14 - VPN Tunnel Example 1

12 VPN Tunnel Example 1 VPN Tunnel From More ThanOne 8205 Router to the SameRemote Peer Device If you are configuring tunnels to a central site from more than one 8205 router, the tunnels will not work with the routers factory default configuration. When more than one 8205 router establishes a tunn...

Page 16 - VPN Tunnel Example 2

14 Connecting Two BranchOffices Two sites can use a VPN tunnel to send and receive secure business data over the Internet. The two sites could be two branch offices, a remote worker and a central office, a branch office and a central office, or your site and a business partners site. For more infor...

Page 17 - VPN Tunnel Worksheet

15 Networks and Security Profile Local network address: (The network IP address for the local network sendingand receiving data on this end of the tunnel.) Local network mask: (The network mask for the local network.) Remote network address: (The network IP address for the remote networksending and ...