INSTEON 2444A3 - Manuals - manualsarea.com

Page 3 - RemoteLinc 2

RemoteLinc 2 RemoteLinc 2 is the smallest and most versatile INSTEON Remote Control in the world. The 1 Scene Controller can easily be reconfigured to give you toggle control of up to 2 scenes and/or devices. RemoteLinc 2 can be: - Handheld (wireless remote) - Mounted on wall with no trim plate (wir...

Page 4 - Required Accessories; Type A to Micro-B cable

Features & Benefits Small, elegant design Super-easy setup Rechargeable battery included Discreet On and Off buttons for 1 Scene Can be reconfigured for 2 Scene triggers or 2 Scene On/Off toggle control Can be installed into a single Decora opening (requires Wall-Mount Bracket) Can be used as a ...

Page 5 - Optional Accessories; Visor Clip

Page 5 of 15 2444A3 Rev: 10/24/2011 10:43 AM Optional Accessories Visor Clip (Available in the 2444Bxx kit)  Control your home from your vehicle  Turn lights on when you arrive and off as you leave Tabletop Stand (Available in the 2444Bxx kit)  Perfect for a nightstand, kitchen counter or coffee ...

Page 6 - Getting Started; Add RemoteLinc 2 Button to a Scene as a Controller; for scene 1 or the bottom for scene 2; Remove RemoteLinc 2 Button from a Scene as a Controller

Page 6 of 15 2444A3 Rev: 10/24/2011 10:43 AM Getting Started Fully charge your RemoteLinc 2 prior to programming or anytime the unit is not responding. RemoteLinc 2 charges via a USB cable (Type A to Micro-B, sold separately). The red charging LED will turn off once the battery has been fully charge...

Page 7 - Using RemoteLinc 2

1) Tap the RemoteLinc 2 switch (top or bottom paddle) - if in 2 scene mode, tap the top of the paddle for scene 1 or the bottom for scene 2 The responder will respond 2) Press & hold the RemoteLinc 2’s Set button until it beeps RemoteLinc 2’s LED will blink GREEN 3) Press & hold the RemoteLi...

Page 8 - LED Behavior; LED State; On Sent; Stuck button; Advanced Features; or the bottom for scene 2

Page 8 of 15 2444A3 Rev: 10/24/2011 10:43 AM LED Behavior RemoteLinc 2 has a two-color LED (Green & Red) which momentarily indicates whether an on or an off is being sent. LED State Meaning Blink Green (Once) On Sent Blink Red (Once) Off Sent Blink Red (for a few seconds) One or more scene membe...

Page 9 - GREEN; Desired Configuration

Remove Multiple Responders from a Scene (Multi-Unlink) 1) Tap the RemoteLinc 2 paddle (top or bottom) – if in 2 scene mode, tap the top of the paddle for scene 1 or the bottom for scene 2 2) Press & Hold Set Button for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink GREEN 3) Pres...

Page 10 - Desired LED Mode; Turn Beeper On During Usage (or Back Off); Desired Beeper Mode Area to Press

Flash Pattern Configuration RED every tap 1 Scene GREEN every tap 2 Scene Non-Toggle (Always On) GREEN / RED alternating 2 Scene Toggle Turn LED Off (or Back On) 1) Press & Hold Set Button for 3 seconds - until you hear a beep RemoteLinc 2’s LED will blink GREEN 2) Press & Hold Set Button a ...

Page 11 - RemoteLinc 2 will

Beeper Behavior Command Method Beeper Disabled (Default) Beeper Enabled On Tap - Beep Off Tap - Beep Fast-On Double-Tap - Beep Fast-Off Double-Tap - Beep Begin Bright Press & hold - Beep Begin Dim Press & hold - Beep Setup Action Beeper Enter Setup Mode, Transition to next setup mode or Exit...

Page 12 - Specifications; General

5) Continue to Hold Set Button until the long beep stops LED turns solid RED 6) Release Set Button RemoteLinc 2 will (Beep)-(Beep) , its LED turns off & returns to Ready Mode Specifications General Product Name RemoteLinc 2 – INSTEON Wireless Switch Brand Smarthome Manufacturer Product Number 24...

Page 13 - Troubleshooting; Problem; Re-link to responder with fast Ramp Rate

Beeper Yes, configurable Battery Charging LED Yes, Embedded (shines red through case during charge) RF Range 50’ Line-of-Sight Retains all settings without power Yes, all saved in Non-volatile EEPROM Mechanical Color White Plastic UV Stabilized ABS Button Configurations 1 Scene (standard), 2 Scene (...

Page 15 - Certification and Warranty

Certification and Warranty FCC & Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any in...