Impex WM-357 - Manuals - manualsarea.com

Page 2 - EXPLODED DIAGRAM.........................................................................; INC. For your safety and benefit, read this manual carefully before; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE IDENTIFIER.....….............................................................

Page 3 - IMPORTANT SAFETY NOTICE; children unattended in the same room with the machine.; attachments not recommended by the manufacturer.; CARE AND MAINTENANCE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE IDENTIFIER

Page 6 - ASSEMBLY INSTRUCTION; incline of Backrest.

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Plug the two Upright End Caps (#24) onto the bottom of the Right &am...

Page 7 - D.) Securely tighten all Nuts and Bolts previously installed.

STEP 2 (See Diagram 2) A.) Plug a Front Leg End Cap (#27) onto the bottom of Front Leg (#5). Attach the Front Leg to the Main Seat Support (#3). Secure it with three M8 x 5/8” Allen Bolts (#38) and Ø 5/8” Washers (#44). DO NOT tighten the Bolts yet. B.) Attach the Main Seat Support to the Cross Brac...

Page 8 - weight capacity for Leg Developer is 100 lbs.; DIAGRAM

STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#7) to the Front Leg (#5). Secure it with one M8 x 3 1/8” Allen Bolt (#39), two Ø 5/8” Washers (#44), and one M8 Aircraft Nut (#49). B.) Insert two Foam Tubes (#13) halfway through the holes on the Leg Developer. Push four Foam Rolls (#30) onto th...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Backrest Supports (#12) onto both ends of the pivot on the Main Seat Support (#3). Place the other end rest against the Backrest Adjustment Bar (#35). B.) Place the Backrest Board (#34) onto the Backrest Supports. Secure it with four M6 x 1 ½” Hex Bolts (#41) an...

Page 10 - Arm Curl Handle from the Leg Developer.; DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#32) to the Arm Curl Stand (#6). Secure it with two M8 x 5/8” Allen Bolts (#38) and Ø 5/8” Washers (#44). B.) Insert the Arm Curl Stand into the top opening on the Front Leg. Secure it with a Lock Knob (#16). C.) When using Leg Developer, remove th...

Page 12 - PARTS LIST; DESCRIPTION

PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Right Upright Beam 1 2 Left Upright Beam 1 3 Main Seat Support 1 4 Cross Brace 1 5 Front Leg 1 6 Arm Curl Stand 1 7 Leg Developer 1 8 Weight Post 2 9 Arm Curl Handle 1 10 Main Seat Stabilizer 1 11 Arm Curl Handle Bar 1 12 Backrest Support 2 13 Foam Tube 2 14...

Page 13 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...