HP LaserJet 3015 - Manuals

Identifying the hp LaserJet 3015 all-in-one Use the following illustration to make sure that the package contents are complete. Package contents 1 Print cartridge 2 Power cord 3 Getting started guide and support flyer 4 Media input tray 5 CD-ROMs containing device software and electronic user guide ...

Device features Speed ● Prints and copies up to 15 pages per minute (ppm) Paper handling ● A 30-page automatic document feeder (ADF), a 150-sheet mediainput tray, and a 10-sheet priority input slot Memory ● 32 megabytes (MB) of random-access memory (RAM) (9 MB for thesystem and 23 MB of RAM availabl...

Identifying the hardware components Use the following illustrations to identify the device hardware components. HP LaserJet 3015 all-in-one hardware components 1 Automatic document feeder (ADF) input tray 2 ADF media lever 3 Device control panel 4 ADF output bin 5 Print-cartridge-door release 6 Devi...

Identifying the device control panel components Use the following illustration to learn about the device control panel components. 1 Fax controls. Use the fax controls to send and receive faxes and to change commonly used fax settings. See the fax guide for information about using the fax controls. ...

Identifying the software components Note The software components that are installed depend on the operating system (OS) and theinstallation type. See the start guide for more information. The following software items are included with the device: ● HP toolbox ● HP LaserJet Scan ● TWAIN or WIA scan d...

Print-media specifications For optimum results, use conventional 75 g/m 2 to 90 g/m 2 (20 to 24 lb) photocopy paper. Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles,dust, wrinkles, curls, or bent edges. Note The printer supports a wide range of stan...

Using the hp toolbox The HP toolbox is a Web application that you can use for the following tasks. ● Monitor the device status. ● View and configure the device settings for print, fax, copy, and scan. ● View troubleshooting and "How do I" information. ● Provide access to fax and scan softwar...

The hp toolbox sections The HP toolbox contains the following sections: ● Status tab ● Fax tab ● Scan to... tab ● Troubleshooting tab ● Documentation tab Other links Each page in the HP toolbox contains links to the HP website for device registration anddevice support, and links for ordering supplie...

Scan to... tab The Scan to... tab has links to the following main pages: ● Scan to E-mail or a Folder ● Scan Preferences Note The scan preferences apply to only Scan to E-mail or a Folder . Troubleshooting tab The Troubleshooting tab has links to various device troubleshooting information, such as h...

Using the device control panel You can also configure settings at the device control panel. This section describes how toperform the following tasks: ● Printing a configuration page ● Printing a device control panel menu map ● Restoring the factory-set defaults ● Changing the device control panel di...

To restore the factory-set defaults 1. Press MENU / ENTER . 2. Use the < or the > button to select Service , and then press MENU / ENTER . 3. Use the < or the > button to select Restore defaults , press MENU / ENTER , and then press MENU / ENTER again to confirm your selection. The devic...

● The phone line sounds for outgoing faxes. ● The ring volume for incoming faxes. To change the alarm volume The alarm sounds when the device is presenting an alert or critical error message. The alarmduration length is either one or three seconds, depending on the type of error. 1. Press MENU / ENT...

To change the device control panel key-press volume The key-press volume controls the sound that is made when a device control panel button ispressed. 1. Press MENU / ENTER . 2. Use the < or the > button to select Common settings , and then press MENU / ENTER . 3. Use the < or the > butt...

3 Printing Use the following information to perform printing tasks with the device: ● Printing by using manual feed ● Stopping or canceling a print job ● Printer drivers ● Understanding print-quality settings ● Optimizing print quality for media types ● Device media specifications ● Guidelines for u...

Printing by using manual feed Use manual feed when printing on mixed media (for example, printing on an envelope, then aletter, then an envelope, and so on). Load an envelope in the priority input tray and loadletterhead in the media input tray. To print by using manual feed 1. Open the device prope...

Stopping or canceling a print job If your print job is currently printing, you can cancel it by pressing CANCEL on the device control panel. CAUTION Pressing CANCEL clears the job that the device is currently processing. If more than one process is running (for example, the device is printing a docu...

Printer drivers When you installed the device software, you selected one of the following printer drivers: PCL 6 driver (default driver): Use the PCL 6 driver to take full advantage of the device features. Unless complete backward compatibility with previous printer control language(PCL) drivers or ...

Understanding print-quality settings Print-quality settings affect how light or dark the print is on the page and the style in which thegraphics are printed. You can also use the print-quality settings to optimize the print quality for aspecific media type. See Optimizing print quality for media typ...

Optimizing print quality for media types Media type settings control the temperature of the device fuser. You can change the settingsfor the print media that you are using to optimize the print quality. The following are the mediatypes that you can optimize for: ● plain paper ● preprinted paper ● pr...

Device media specifications HP LaserJet devices produce excellent print quality. The device prints on a variety of media,such as cut-sheet paper (including recycled paper), envelopes, labels, transparencies, andcustom-sized media. Properties such as weight, grain, and moisture content are importantf...

Guidelines for using media Use the guidelines in this section when selecting and using print media. Paper For best results, use conventional paper. Make sure that the paper is of good quality and freeof cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If y...

When selecting labels, consider the quality of the following factors: ● Adhesives: The adhesive material should be stable at 200° C (392° F), the device maximum temperature. ● Arrangement: Use only labels that have no exposed backing between them. Labels can peel off sheets that have spaces between ...

Envelopes with double-side seams An envelope with double-side-seam construction has vertical seams at both ends of theenvelope rather than diagonal seams. This style is more likely to wrinkle during printing. Makesure that the seam extends all the way to the corner of the envelope as shown in the fo...

● Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged. ● Sizes: Use card stock that is within the following size ranges only: ● Minimum: 76 by 127 mm ( (3 by 5 inches)) ● Maximum: 216 by 356 mm ( (8.5 by 14 inches)) Note The ADF output bin holds one sheet of legal-...

Selecting media for the automatic document feeder (ADF) Use the following guidelines when selecting media for the ADF. Automatic document feeder (ADF) specifications ● Input capacity: The ADF holds up to 30 sheets of flat, 60 to 90 g/m 2 (16 to 24 lb), copier-grade paper. ● Media size : Use copier-g...

Printing on envelopes Use one of the following methods to print on envelopes. ● To print on one envelope ● To print on multiple envelopes To print on one envelope Use only envelopes that are recommended for laser printers. See Device media specifications for more information. Note Use the priority i...

To print on multiple envelopes Use only envelopes that are recommended for laser printers. See Device media specifications for more information. Note Use the priority input slot for printing on one envelope. Use the media input tray for printing onmultiple envelopes. 1. Open the media input tray and...

Printing on transparencies and labels Use only transparencies and labels that are recommended for use in laser printers, such asHP transparency film and HP laser-quality labels. See Device media specifications for more information. CAUTION Inspect the media to make sure that it is not wrinkled or cu...

Printing on letterhead and preprinted forms Only use letterhead or preprinted forms that are recommended for use in laser printers, suchas HP laser-quality letterhead and preprinted forms. See Device media specifications for more information. Use these instructions to print documents on letterhead o...

Printing on custom-sized media or card stock The device can print on custom-sized media and card stock that is between 76 by 127 mm (3by 5 inches) and 216 by 356 mm (8.5 by 14 inches) in size. Depending on the media, you canprint up to 10 sheets from the priority input slot. Use the media input tray...

Printing on both sides of the media (manual duplexing) To print on both sides of the media (manual duplexing), you must send the media through thedevice twice. Manual duplexing can cause the device to become dirty, which reduces print quality. If thedevice becomes dirty, see Cleaning and maintenance...

Printing multiple pages on a single sheet of media You can select the number of pages that you want to print on a single sheet of media. If youchoose to print more than one page per sheet, the pages appear smaller and are arranged onthe sheet in the order that they would otherwise be printed. You ca...

Printing booklets You can print booklets on letter, legal, or A4 print media. To print booklets 1. Load the print media in the media input tray. 2. In the software program, open the device properties (printer driver). For instructions, see To change settings for a print job . 3. On the Finishing tab...

Printing watermarks You can use the watermark option to print text “underneath” (in the background) of an existingdocument. For example, you might want to have large gray letters that spell Draft orConfidential printed diagonally across the first page or all of the pages of a document. To use the wa...

4 Copying Use these instructions to perform copying tasks with your device: ● Loading originals to copy ● Starting a copy job ● Canceling a copy job ● Adjusting the copy quality ● Adjusting the lighter/darker (contrast) setting ● Reducing or enlarging copies ● Changing the default copy-collation set...

Loading originals to copy Use these instructions to load originals into your device for copying. See Selecting media for the automatic document feeder (ADF) for information about choosing original documents for copying. To load originals into the automatic document feeder (ADF)input tray Note ADF ca...

Starting a copy job To make copies with your device, use the following instructions. 1. Load your original document face-down into the automatic document feeder (ADF) input tray. 2. Press START / COPY on the device control panel to start copying. 3. Repeat the process for each copy. For more detaile...

Adjusting the copy quality The factory-set default for copy quality is Text . This setting is the best for items that contain mostly text. When making a copy of a photo or graphic, you can select the Photo setting to increase the quality of your copy, or select the Best Photo setting for the highest...

Adjusting the lighter/darker (contrast) setting The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use thefollowing procedure to change the contrast for the current copy job only. To adjust the lighter/darker setting for the current job 1. On the device control pane...

Reducing or enlarging copies The device can reduce copies to as little as 25 percent of the original or enlarge copies to asmuch as 400 percent of the original. It can also make the following reductions or enlargementsautomatically: Note You must change the default paper size in the media input tray...

To reduce or enlarge copies for the current job To reduce or enlarge copies for the current job only, use the following instructions. 1. On the device control panel, press REDUCE / ENLARGE . 2. Select the size to which you would like to reduce or enlarge the copies in this job. You can select: ● Ori...

Changing the default copy-collation setting You can set the device to automatically collate multiple copies into sets. For example, if youare making two copies of three pages and the automatic collation is on, the pages print in thisorder: 1,2,3,1,2,3. If automatic collation is off, the pages print ...

Changing the default number of copies You can choose to have the default number of copies be any number from 1 to 99. To change the default number of copies 1. On the device control panel, press MENU / ENTER . 2. Use the < or the > button to select Copy setup , and then press MENU / ENTER . 3....

Copying two-sided originals To copy a multiple-page stack of two-sided originals 1. Load the stack of originals to be copied into the automatic document feeder (ADF) input tray with the first page facing down, and with the top of the page leading into the ADF. 2. Press START / COPY . The odd-numbere...

5 Scanning Use the following instructions to perform scanning tasks: ● Loading originals to scan ● Understanding scanning methods ● Canceling a scan job ● Scanning from the device control panel ● Scanning by using hp LaserJet Scan software ● Scanning by using TWAIN-compliant and WIA-compliant softwa...

Loading originals to scan Use these instructions to load originals into the device for scanning. See Selecting media for the automatic document feeder (ADF) for information about choosing original documents for scanning. Loading originals into the automatic document feeder (ADF)input tray Note Autom...

Understanding scanning methods You can scan an item in the following ways. ● Scan from the device: Start scanning directly from the device by using the device control panel scan buttons. The SCAN TO button can be programmed to scan to e-mail or to scan to a folder. For more information, see Scanning...

Canceling a scan job To cancel a scan job, use one of the following procedures. ● Press CANCEL on the device control panel. ● Click the Cancel button in the onscreen dialog box. If you cancel a scan job, remove the original document from the automatic document feeder(ADF) input tray. ENWW Canceling ...

Scanning from the device control panel Use the following instructions to scan directly from the device control panel. Note The computer that is connected to the device must be turned on. Programming the Scan to button To program the device SCAN TO button, you must gain access to the device settings....

Scanning by using hp LaserJet Scan software Use the HP LaserJet Scan software program to scan an item to any of the following: ● e-mail ● a folder ● another software program that you specify ● the Readiris OCR program, if it is installed on the computer For more detailed instructions about loading o...

3. On the computer, click Start , select Hewlett-Packard , select hp LaserJet 3015 , and then select Scan . OR Press START SCAN on the device. HP LaserJet Scan software opens on the computer. Pressing START SCAN to start the HP LaserJet Scan software is not supported when the device is connected to ...

Note The options that you set in step 6 are for the current job only, unless you save them as aQuick Set. Scanning to the Readiris OCR software 1. Adjust the automatic document feeder (ADF) media lever to accommodate either a single sheet or a stack of media. (For more information, see Loading origi...

Scanning by using TWAIN-compliant and WIA-compliant software The device is TWAIN-compliant and Windows Imaging Application (WIA)-compliant. Thedevice works with Windows-based programs that support TWAIN-compliant or WIA-compliantscanning devices. Note If the software program you are using is not TWA...

Scanning by using OCR You can use OCR software to import scanned text into your preferred word-processingprogram for editing. Readiris The software CD-ROM includes the Readiris OCR program. If you want to use the Readirisprogram, install it from the software CD-ROM, and then follow the instructions ...

Scanner resolution and color If you are printing a scanned image, and the quality is not what you expected, you might haveselected a resolution or color setting in the scanner software that does not match your needs.Resolution and color affect the following features of scanned images: ● Image clarit...

6 Faxing For instructions about using the device fax functionality, see the fax guide that came with thedevice. ENWW 69

Cleaning the outside of the device To clean the exterior Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the exterior of thedevice. To clean the glass Over time, specks of debris might collect on the scanner glass and affect performance. Usethe following procedure to clean th...

Cleaning the media path If you are experiencing toner specks or dots on the printouts, clean the media path. To clean the media path 1. Press MENU / ENTER . 2. Use the < or the > button to find the Service menu. 3. Press MENU / ENTER . 4. Use the < or the > button to find Cleaning Mode ....

Device does not turn on Try the tips in this section if the device does not turn on. Is power reaching the device? ● If you are using a power strip, make sure that the power strip is turned on. Or, try pluggingthe device directly into the power outlet. ● Test the power outlet to make sure that it is...

The device control panel display has black lines or dots, or fades Try the tips in this section if the device control panel display has black lines or dots, or fades. Black lines or dots CAUTION Static electricity can cause unexpected black lines or dots to appear on the device controlpanel display....

Pages print but are totally blank Try the tips in this section if pages exit the device, but have nothing printed on them. Is the sealing tape still in the print cartridge? The sealing tape might still be in the print cartridge. Remove the print cartridge and pull out thesealing tape. Reinstall the ...

Pages did not print Try these tips when the device does not print any pages. Does a message appear on your computer screen? See Onscreen error messages appear for more information. Is media being pulled into the device correctly? See Paper-handling problems exist for more information. Are media jams...

Pages printed, but a problem exists Try these tips when pages are printed on, but a problem exists. Is the print quality poor? See Print quality is unacceptable for more information. Is the printed page different from what appears onscreen? See Printed page is different from what appears onscreen fo...

Onscreen error messages appear If the following messages appear onscreen, use the appropriate procedures to remedy theproblem. Printer not responding/error writing to LPT1 Check the following conditions: ● Is the device in the Ready state? ● Are the power cord and the IEEE 1284-B-compliant parallel ...

Paper-handling problems exist Use the tips in this section when the device experiences paper-handling problems. Print is skewed (crooked) Are the media guides adjusted properly? Remove all media from the input tray, straighten the stack, and then load the media in theinput tray again. Adjust the med...

Printed page is different from what appears onscreen Try the tips in this section when what is printed on the page differs from what appearsonscreen. Is the text garbled, incorrect, or incomplete? To verify that the device is functioning, print a configuration page . See Printing a configuration pag...

Is the page format different from the format on another printer? If you used an older or different printer driver (printer software) to create the document or thedevice properties settings in the software are different, the page format might change whenyou try to print using your new printer driver ...

Media jams occur in the printer Occasionally, media becomes jammed during a print job. Try the following remedies beforeyou attempt to clear the jam: ● Make sure that you are printing on media that meets HP specifications. See Device media specifications for more information. ● Make sure that you ar...

6. Open the media input tray and remove any media. 7. Slide the media guides inward as far as they will go. Press and hold down the tabs inside the media input tray, and slide the media input tray out of the device. 8. With both hands, grasp the side of the media that is most visible (this includes ...

Note If you turned the device off before clearing the media jam, turn it on again, and then restartyour printing or copying job. If the media has jammed in the automatic document feeder (ADF), see Media jams occur in the automatic document feeder (ADF) . Tips to avoid media jams ● Make sure the auto...

Print quality is unacceptable This section provides information about identifying and correcting print defects. Note Hewlett-Packard does not recommend the use of uninterrupted power supply (UPS) battery-backup devices or surge suppressors with this device. Many surge suppressors and battery-backups...

Dropouts ● A single sheet of media might be defective. Try reprinting the job. ● The moisture content of the media is uneven or the media has moist spots on the surface.Try printing on different media. See Device media specifications for more information. ● The media lot is bad. The manufacturing pr...

Gray background ● Make sure that the priority input slot is in place. ● Decrease the print density setting by using the HP toolbox. This decreases the amount ofbackground shading. See the device software Help for more information. ● Change the media to a lighter basis weight. See Device media specif...

Loose toner ● Select Type is: on the Paper tab or the Paper/Quality tab of the printer driver, and select the media that you are using. See Optimizing print quality for media types for instructions. This feature is also available in the HP toolbox. ● Clean the inside of the device. See Cleaning and ...

Misformed characters ● If characters are improperly formed, producing hollow images, the print media that you areusing might be too slick. Try a different media. See Device media specifications for more information. ● If characters are improperly formed, producing a wavy effect, the device might nee...

Curl or wave ● Check the media type and quality. Both high temperature and humidity can cause mediato curl. See Device media specifications for more information. ● The media might have been in the input tray for a long time. Turn over the stack of mediain the input tray. Also, try rotating the media...

Toner scatter outline ● If large amounts of toner have scattered around the characters, the media might beresisting the toner. (A small amount of toner scatter is normal for laser printing.) Try adifferent media type. See Device media specifications for more information. ● Turn over the stack of med...

Device control panel error messages appear This section contains information about error messages that can appear on the device controlpanel display, and how to clear them. Resolving common error messages The following messages are the most common error messages that can appear on the devicecontrol ...

Alert messages Alert messages indicate that some action must be performed, such as adding print media orclearing a jam. When an alert message appears, the device automatically stops the currenttask and the job does not proceed until someone attends to the situation. After you correct theerror, the d...

No copy came out Is media loaded in the input tray? Load media in the device. See Loading originals to copy for more information. Is the original loaded correctly? Make sure that the original is loaded correctly in the automatic document feeder (ADF) inputtray. The original should be loaded top down...

Copies are blank, or images are missing or faded Has the sealing tape been removed from the print cartridge? The sealing tape might not have been removed from the print cartridge. Remove the printcartridge from the device, pull out the sealing tape, and reinstall the print cartridge. See thestart gu...

Copy quality is unacceptable This section provides information about the following topics: ● Preventing problems ● Identifying and correcting copy defects Preventing problems The following are a few simple steps you can take to improve copy quality: ● Use quality originals. ● Load the media correctl...

Media jams occur in the automatic document feeder (ADF) Occasionally, media becomes jammed during a copy, scan, or fax job. You are notified of a media jam by a software error message and the Doc feeder jam Clear, Reload message that appears on the device control panel display. ● The ADF input tray ...

Copy defects are apparent Vertical white or faded stripes ● The media might not meet Hewlett-Packard media specifications (for example, the mediais too moist or too rough). See Device media specifications for more information. ● The toner might be low. See HP LaserJet print cartridges for instructio...

Scanned image is of poor quality Is the original a second-generation photo or picture? Reprinted photographs, such as those in newspapers or magazines, are printed by using tinydots of ink that make an interpretation of the original photograph, which dramaticallydecreases the quality. Often, the ink...

Part of the image did not scan Was the original loaded correctly? Make sure that you loaded the original correctly. See Loading originals to scan for instructions. Does the original have a colored background? Colored backgrounds can cause images in the foreground to blend into the background. Tryadj...

The scan takes too long Is your resolution or color level set too high? If you set the resolution and color level too high, the scan job takes longer and results inlarger files. To obtain good results when scanning or copying, it is important that you use thecorrect resolution and color level settin...

Error messages appear If one of the following messages appears on the screen, use this information to remedy theproblem. Common scanning error messages This section describes common scanning error messages, and how to remedy them. Themost common scanning error messages include the following: ● Unabl...

Scan quality is unacceptable This section provides information about improving scan quality by preventing or correctingproblems. Preventing problems The following are a few simple steps you can take to improve copy and scan quality: ● Use high-quality originals. ● Load the media correctly. If the me...

A Specifications See these sections for specifications information about the following: ● HP LaserJet 3015 all-in-one ● HP LaserJet 3015 all-in-one battery Physical specifications Product Height Depth Width Weight HP LaserJet 3015all-in-one 445 mm(17.7 in) 470 mm(18.5 in) 426 mm(16.8 in) 9.1 kg(20 l...

HP LaserJet 3015 all-in-one ● HP LaserJet 3015 all-in-one specifications ● Regulatory Information HP LaserJet 3015 all-in-one specifications Printer capacities and ratings Print speed ● 15 pages per minute (ppm) for letter sizepaper and 14 ppm for A4-size paper ● First page out in less than 10 secon...

B Regulatory Information See these sections for regulatory information: ● FCC regulations ● Telephone consumer protection act (United States) ● IC CS-03 requirements ● Regulatory information for the European Union countries/regions ● Safety statements ● Declaration of Conformity ● Environmental prod...

FCC regulations This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, a...

An FCC-compliant telephone cord and modular plug is provided with this equipment. Thisequipment is designed to be connected to the telephone network or premises wiring using acompatible modular jack which is Part 68 compliant. This equipment cannot be used ontelephone company-provided coin service. ...

IC CS-03 requirements NOTICE: The Industry Canada label identifies certified equipment. This certification means theequipment meets certain telecommunications network protective, operational, and safetyrequirements as prescribed in the appropriate Terminal Equipment Technical Requirementdocument(s)....

Safety statements Laser safety statement The Center for Devices and Radiological Health (CDRH) of the U.S. Food and DrugAdministration has implemented regulations for laser products manufactured since August 1,1976. Compliance is mandatory for products marketed in the United States. This printer isc...

Laser statement for Finland LASERTURVALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP LaserJet 3015 all-in-one-laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteenulkopuolelle. Laitteen turvallis...

Australia This equipment complies with Australian EMC requirements. ENWW Safety statements 123

Declaration of Conformity Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Hewlett-Packard Company Manufacturer’s Address: 11311 Chinden BoulevardBoise, Idaho 83714-1021, USA declares that the product Product Name: HP LaserJet 3015 all-in-one Product Number: ...

Environmental product stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentallysound manner. This product has been designed with several attributes to minimize impacts onour environment. Ozone production This product gener...

HP LaserJet printing supplies In many countries/regions, this product’s printing supplies (for example, print cartridge, drum,fuser) can be returned to HP through the HP Printing Supplies Returns and RecyclingProgram. An easy to use and free takeback program is available in over 48 countries/regions...

Weight: approx. 1 gram Location: on formatter PC board (one battery per product) User Removable: No For recycling information, you can contact http://www.hp.com/go/recycle or contact your local authorities or the Electronics Industries Alliance: http://www.eiae.org . Nederlands Toepassing: De batter...

Material safety data sheets Material Safety Data Sheets (MSDS) can be obtained by contacting the HP LaserJet Suppliesweb site at http://www.hp.com/hpinfo/community/environment/productinfo/safety.htm . 128 Appendix B Regulatory Information ENWW

C HP limited warranty statement HP LaserJet 3015 all-in-one ONE-YEAR LIMITED WARRANTY HP PRODUCTHP LaserJet 3015 all-in-one DURATION OF LIMITED WARRANTYOne year HP warrants to you, the end-user customer, that HP hardware, accessories, and supplies will be free from defects in materials and workmansh...

D HP parts and accessories Use the following topics to find out about ordering parts and accessories for your device: ● Ordering HP parts and accessories ● HP LaserJet print cartridges ENWW 131

Ordering HP parts and accessories HP parts and accessories chart You can increase the device’s capabilities with optional accessories and supplies. Useaccessories and supplies designed specifically for your HP LaserJet 3015 all-in-one to ensureoptimum performance. Accessories Product name Descriptio...

HP LaserJet print cartridges This section contains information about using HP LaserJet print cartridges. HP policy on non-HP print cartridges Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new,refilled, or remanufactured. Because they are not HP products, HP cann...

For a more environmentally responsible return of used cartridges and supplies, HPencourages the use of bulk returns. Simply bundle two or more cartridges together and usethe single, pre-paid, pre-addressed UPS label that is supplied in the package. For moreinformation in the U.S., call (800) 340-244...

Obtaining hardware service Note Warranty service and support options might vary depending on your country/region. Foradditional support information, visit http://www.hp.com . To obtain hardware service If your hardware should fail during the warranty period, HP offers the following supportoptions: ●...

Extended warranty In most countries/regions, HP CarePack provides additional—beyond standard warranty—coverage for the HP product and all HP-supplied internal components. This hardwaremaintenance can uplift the standard warranty (i.e. from next-day to same-day service) and/orextend it up to five yea...

Glossary 1284-B The 1284 parallel port standard was developed by the Institute of Electricaland Electronics Engineers (IEEE). The term "1284-B" refers to a specificconnector type on the end of the parallel cable that attaches to the peripheral(for example, a printer). A 1284-B connector is l...

Index Symbols/Numerics 2-sided originals copying 54 2-sided printing 37300 dpi print-quality setting 21600 dpi print-quality setting 21 A accessories and parts 132acoustic emissions 112acoustic emissions while copying 113ADF clearing jams 102duty cycle 114input tray 4loading input tray 56media speci...