Page 3 - Installing the Honeywell thermostat
DOC ID - 1188 • Rev 06.02 3 / 16 The Following figure shows the Honeywell controls on the ClareHome UI. Figure 1: User interface of the Honeywell thermostat (1) Temperature displays on the ClareHome UI in Fahrenheit. (2) Change the Heat set point by tapping the up/down arrow. (3) Change the Cool set...
Page 4 - Registering the thermostat; To register the Honeywell thermostat:; Enabling auto mode
DOC ID - 1188 • Rev 06.02 4 / 16 Registering the thermostat After installation, you must register the thermostat on the Honeywell portal. This allows the thermostat to be accessed remotely and updated with information from the Honeywell portal. To register the Honeywell thermostat: Note: To register...
Page 5 - Pairing and removing the thermostat with ClareHome; To pair the thermostat using ClareHome:; ClareHome app’s; Devices
DOC ID - 1188 • Rev 06.02 5 / 16 Pairing and removing the thermostat with ClareHome Follow the below steps to add and remove a thermostat in the ClareHome app. To pair the thermostat using ClareHome: 1. Tap the ClareHome app’s Devices page. 2. Tap Manage Devices .
Page 6 - Read through the displayed information, and then tap; Authorize Device
DOC ID - 1188 • Rev 06.02 6 / 16 3. Tap Add Devices . 4. Select the device category, Climate . 5. Select the device type, Honeywell – VisionPRO, FocusPRO, RedLINK Hub . 6. Read through the displayed information, and then tap Authorize Device .
Page 7 - Enter your credentials into the Honeywell TCC page and tap; Sign In
DOC ID - 1188 • Rev 06.02 7 / 16 7. Enter your credentials into the Honeywell TCC page and tap Sign In . 8. Read through the provided information and tap Accept.
Page 9 - Tap the 3 dots next to the thermostat, and then tap; Remove
DOC ID - 1188 • Rev 06.02 9 / 16 3. Tap Edit Devices. 4. Tap the 3 dots next to the thermostat, and then tap Remove . 5. Tap Confirm.
Page 10 - Pairing and removing the thermostat in FusionPro; Follow the below steps to add and remove a thermostat in FusionPro.; To add the thermostat in FusionPro:; Locate the desired account in the list, and then click; View
DOC ID - 1188 • Rev 06.02 10 / 16 Pairing and removing the thermostat in FusionPro Follow the below steps to add and remove a thermostat in FusionPro. To add the thermostat in FusionPro: 1. Click Accounts in the side menu. 2. Locate the desired account in the list, and then click View . The Account ...
Page 11 - tab, and then click; Add Devices
DOC ID - 1188 • Rev 06.02 11 / 16 3. Click the Devices tab, and then click Add Devices . 4. Select the device category ( Climate ).
Page 12 - Honeywell; This will take you to the Honeywell sign in page.
DOC ID - 1188 • Rev 06.02 12 / 16 5. Click Honeywell – VisionPro, FocusPro, RedLINK Hub . 6. Click Authorize Device. This will take you to the Honeywell sign in page.
Page 13 - Enter the customer’s credentials and click; Read through the information presented and click; I Accept
DOC ID - 1188 • Rev 06.02 13 / 16 7. Enter the customer’s credentials and click Sign In . 8. Read through the information presented and click I Accept . This will redirect back to FusionPro and show the authorization status.
Page 14 - Once the device is successfully authorized, click; Return to Device List.
DOC ID - 1188 • Rev 06.02 14 / 16 9. Once the device is successfully authorized, click Return to Device List. To remove the thermostat with FusionPro: 1. Click Accounts in the side menu.
Page 15 - Delete; next to the desired device.
DOC ID - 1188 • Rev 06.02 15 / 16 2. Locate the desired account in the list, and then click View . The Account sub-menu is now available. 3. Click the Devices tab, and then click Delete next to the desired device.
Page 16 - Contact information
DOC ID - 1188 • Rev 06.02 16 / 16 4. Click Delete to confirm. Contact information Clare Controls, LLC. 7519 Pennsylvania Ave, Suite 104 Sarasota, FL 34243 General: 941.328.3991 Fax: 941.870.9646 www.clarecontrols.com Integrator/Dealer Support: 941.404.1072 [email protected] Homeowner Support (ClareC...