Honeywell VERTEXEDGE - Manuals

Page 2 - Safety; About this Publication; General Safety; EMC Considerations

Vertex SF System 8 User Manual Safety Read this information before start using your device. About this Publication While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and ﬁtness for a particular purpose and make...

Page 3 - Industry Canada Statement

Vertex SF System 9 User Manual equipment. This device complies with Part 15 of the FCC Rules. Operation to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper...

Page 4 - Cabling

Vertex SF System 10 User Manual Cabling At a very minimum, all cables should include a braided shield. Ideal results have been obtained with twisted pair cabling which has a foil shield surrounding each pair plus foil and 90% braid shielding around the bundle. In addition, ensure local electrical co...

Page 5 - Introduction

Vertex SF System 11 User Manual Introduction Learn what you need to know about the Honeywell Vertex® SF Continuous Monitor System before operating. System Overview The Honeywell Analytics Vertex SF™ System continuously monitors for toxic gases. It responds to gases that exceed programmed levels by: ...

Page 6 - System Components; Analyzer side panel

Vertex SF System 12 User Manual System Components The following photos illustrate the Vertex SF System views, ports, connections and controls. Analyzer side panel — Exterior Analyzer side panel — Interior

Page 7 - Analyzer

Vertex SF System 13 User Manual Analyzer — Front view 1. Analyzer status LED 2. Product label

Page 8 - Chemcassette Detection System; Detector Optics

Vertex SF System 14 User Manual Chemcassette Detection System The Chemcassette® Analyzer module is a self- contained, microprocessor controlled analyzer that occupies one slot in a Vertex tier. Sample lines and the vacuum source are connected to the Chemcassette® via a single 10-tube connector. The ...

Page 10 - Chemcassette® Tapes

Vertex SF System 16 User Manual The microprocessor in the Chemcassette analyzer module interprets the stain. It then calculates and stores a precise concentration level in the module’s memory. Gas concentrations are reported in parts-per-million (ppm), parts-per- billion (ppb) or milligrams-per-cubi...

Page 11 - Install an Analyzer

Vertex SF System 17 User Manual NOTE When reconnecting the analyzer, connect the Analyzer Communications cable to the analyzer first. Install an Analyzer 1. Reach into the slot and position cables out of the way. 2. Place analyzer on slides. Push in until locks engage. 3. Slide Analyzer out until fu...

Page 12 - Specifications

Specifications Overall system dimension Size 76"X24"X35" Weight - Full loaded condition 1,000lbs (454kg) Weight - Empty rack ≤730lbs (331kg) Analyzer Size 22" x 13" x 6" Weight ≤ 27lbs(12kg) Power Requirements Operating Voltage DC 24V / 2.5A Power Consumption Normal condition...

Honeywell VERTEXEDGE - Manuals

Manuals:

User Manual Honeywell VERTEXEDGE

Summary

Honeywell Manuals