Honeywell TM005X- Manuals

Page 2 - MAIN UNIT; FEATURES

3 3 INTRODUCTION Thank you for selecting the Honeywell Wireless Thermo-Hygrometer with Remote Sensor. This device monitors and displays temperature and humidity both indoors and outdoors from up to three remote locations. In this package you will find: • One main unit (receiver) • One remote sensor ...

Page 3 - FRONT VIEW; TEMPERATURE AND HUMIDITY INFORMATION IN A; Selects the desired remote channel or indoor readings; SEARCH BUTTON; Enforces the remote sensors signal search; MEMORY BUTTON; REAR VIEW; F. BATTERY COMPARTMENT; Selects temperature display in Celsius or Fahrenheit; H. UNFOLDING TABLE STAND

5 5 FRONT VIEW A. TEMPERATURE AND HUMIDITY INFORMATION IN A TWO LINE LCD DISPLAY B. CHANNEL BUTTON • Selects the desired remote channel or indoor readings C. SEARCH BUTTON • Enforces the remote sensors signal search D. MEMORY BUTTON • Toggles between current, minimum and maximum readings of the indo...

Page 4 - REMOTE SENSOR; B. BATTERY COMPARTMENT; Holds two AA-size batteries; ALWAYS; before; RESET

7 7 REMOTE SENSOR FEATURES • Remote temperature and humidity transmission to the main unit via 433 MHz signal • 100 feet (30 meters) transmission range without interference • LCD display of measured temperature and humidity • Three (3) channels selection • Selection of the temperature display in Cel...

Page 5 - BATTERY INSTALLATION; Open the battery compartment door.; GETTING STARTED

9 9 NOTE: 1. Avoid pressing any buttons on the main unit before the remote temperature is displayed for about 2 minutes. 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. 3. Place the remote sensor so that it...

Page 6 - CHANNEL; NOTE; : If the indoor or remote temperature and/or humidity goes above; COMFORT LEVEL INDICATORS; MEMORY

11 11 The remote temperature and humidity for channel one, two and three can be recalled by pressing CHANNEL button. The wave icon is located above the remote channel number and indicates the reception status from the remote sensor. The following three types of reception status may be displayed: The...

Page 7 - LOST COMMUNICATION; SEARCH

13 13 displayed one-by-one automatically for 4 seconds each in the following sequence: Indoor, Channel 1, Channel 2 and Channel 3. To exit from scanning mode, press and hold the CHANNEL button for 2 seconds, and the icon “ 3 ” will disappear, returning the main unit display to the default display mo...

Page 8 - SPECIFICATIONS; Main Unit

15 15 invalidate the warranty and may cause damage. These units contain no user-serviceable parts. • Use only fresh batteries. Do not mix new and old batteries. • Read the user's manual thoroughly before operating the units. 16 SPECIFICATIONS Main Unit Indoor Temperature Proposed operating range: -5...

Page 9 - The information above is not to be used as a contact for support or

17 17 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warn...

Page 10 - STANDARD WARRANTY INFORMATION

19 19 STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration i...