Page 2 - Installation Guide; Wallplate installation; MERCURY NOTICE; Must be installed by a trained, experienced technician
Installation Guide 2 69-2486—03 M29481 Wallplate installation 1. Separate wallplate from thermostat.2. Mount wallplate as shown below. MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash. Contact your local waste man...
Page 4 - Wiring; Terminal Designations; Conventional Terminal Letters:; Wiring guide—conventional systems
Installation Guide 4 69-2486—03 Wiring See [notes] below [1] Power supply. Provide disconnect means and overload protection as required. [3] Connection to 24VAC common at the transformer is required. [9] See "Optional THP9045 Wiring Module" on page 14 for more details. Terminal Designations ...
Page 5 - Wiring guide—heat pump systems
TH8320ZW1000 5 69-2486—03 1H/1C Heat Pump (no auxiliary heat) Rc Power [1] R [R+Rc joined by jumper] O/B Changeover valve [5] Y Compressor relay G Fan relay C 24VAC common [3] K Optional THP9045 Wiring Module Terminal [9] 2H/1C Heat Pump (with auxiliary heat) L Equipment monitor [6, 7] E Emergency h...
Page 6 - st; Installer setup; DONE
Installation Guide 6 69-2486—03 SCHED HOLD TUE FAN AUTO Inside 70 aM 6:00 SYSTEM HEAT DONE 20 0120 DONE CANCEL aM 6:00 SYSTEM HEAT M32417 DONE TUE 15 6 2006 DONE TUE PM 1:00 M29485 Align pins on back of thermostat with slots in wallplate, then push gently until thermostat snaps into place. Mount the...
Page 7 - Setup functions; bold; Month
TH8320ZW1000 7 69-2486—03 DONE 20 0120 DONE 20 0120 M32427 Installer setup Setting Function Press DONE to exit & save settings. Press st to select function Press st to change setting Setup functions Settings & Options (factory default in bold ) 0120 Year (first two digits) 20 (2000-2078)21 (...
Page 8 - Gas or oil furnaces of less than 90% efficiency
Installation Guide 8 69-2486—03 Setup functions Settings & Options (factory default in bold ) 0250 2nd stage heat cycle rate (CPH) 5 Gas or oil furnaces of less than 90% efficiency 1 Steam or gravity systems 3 Hot water systems & furnaces of 90%+ efficiency 9 Electric furnaces [Other options...
Page 9 - On
TH8320ZW1000 9 69-2486—03 Setup functions Settings & Options (factory default in bold ) 0530 Adaptive Intelli-gent Recovery™ 1 On 0 Off 0540 Program periods 4 4 program periods (Wake, Leave, Return, Sleep) 2 2 program periods (Wake, Sleep) 0580 Compressor protection 5 5 minute compressor off tim...
Page 10 - TEST; Cooling system; Installer system test
Installation Guide 10 69-2486—03 DONE 20 0120 DONE 1 0 TEST M29488 During installer setup, press t repeatedly until “Test” appears. Test number System status Press t to select test Press t to change status Press DONE to terminate testing. 1 Cooling system 0 Compressor and fan turn off 1 Compressor a...
Page 14 - Special functions; Auto Changeover; Compressor Protection; Optional THP9045 Wiring Module; Please contact your distributor to order replacement parts.; Accessories & replacement parts
Installation Guide 14 69-2486—03 Special functions Auto Changeover (Setup Function 0300 ): When set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 2 degrees apart. Adaptive Intelligent Recovery (Setup Func...
Page 15 - Regulatory information; • Consult the dealer or an experienced radio/TV technician for help.; n of the
TH8320ZW1000 15 69-2486—03 Regulatory information FCC Compliance Statement (Part 15.19) (USA only)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and2) This device must accept any interferenc...
Page 16 - Automation and Control Solutions
Honeywell International Inc.1985 Douglas Drive NorthGolden Valley, MN 55422http://customer.honeywell.com Automation and Control Solutions ® U.S. Registered Trademark.US Patent No. 6,574,581, 6,975,958, 7,114,554, 7,346,467, 7,636,604, 7,693,582, 7,788,936, 7,845,576, and other patents pending.© 2011...