Honeywell TE653ELW- Manuals

9 9 REAR/SIDE A. WEATHER AND TIME IN EASY-TO READ DIGITS B. MEM button • Allows displaying current, minimum, maximum readings of the indoor and remote temperature & humidity • When depressed and held, clears collected records memory C. MODE button 10 • Allows toggling between two different clock...

11 11 • Allows displaying pressure history records J. SNOOZE/LIGHT button • Stops all alarms temporarily • Activates a backlight for 5 seconds K. Back panel UP ( ▲ ) button Increases the parameters of pressure and altitude L. Back panel DOWN ( ▼ ) button Decreases the parameters of pressure and alti...

15 15 MOON PHASE ICONS PRESSURE MODE The pressure mode indicates the current local barometric pressure, the sea level pressure and a moon phase. It also displays barometric pressure value for the past 36 hours in 1 hour intervals. Pressure can be set in inHG or HPa/mBar and altitude can be set in fe...

17 17 The indoor temperature and humidity with the icon IN are located below the remote temperature and humidity information line. NOTE : If the indoor or remote temperature or humidity goes above or below operating range stated in specifications, the main unit’s display ( weather) will show dashes ...

19 19 WET -5°C to 50°C (23°F to122°F) OVER 70%RH Contains excess moisture DRY 5°C to 50°C (23°F to122°F) BELOW 40%RH Contains inadequate moisture MAXIMUM AND MINIMUM READINGS The maximum and minimum record of the indoor and remote temperature and humidity will be automatically stored in the memory o...

21 21 atomic time signal from the NIST Atomic clock in Boulder, Colorado. The WWVB tower icon on the unit’s display will flash indicating a radio signal reception from the WWVB station. If the tower icon is not fully lit, or if the time and date are not set automatically, please consider the followi...

23 23 next parameter (month) • Continue setting month, date, hour, minutes, language for the day of the week and temperature in Fahrenheit or Celsius • Press MODE for the last time to return to the time of day with seconds, after the last parameter is set CLOCK ALARMS The Barometric Weather Forecast...

25 25 If the alarm is not disabled after that, it will sound for two more minutes and then will stop by itself. BACKLIGHT The backlight feature is enabled only after the time is set. To activate the backlight press the SNOOZE/LIGHT button once, and both – clock and weather station displays - will li...

27 27 User-selectable (°F or °C) temperature display Remote channels auto-scan feature Maximum number of remote sensors: 3 (one included) Readings update interval: every 45 seconds Low battery indicators – for each remote channel and main unit EL backlight Clock Precise atomic time 4 US Time Zones 1...

29 29 DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk Tualatin, OR 97062 declare that the product Product No.: TE653ELW Product Name: Honeywell Barometric Weather Forecaster Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk ...