Honeywell T7100D- Manuals

Page 3 - RECYCLING NOTICE; INSTALLATION; When Installing this Product...; WARNING; Location; Subbase Without Remote-Mounted Temperature Sensor

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 3 Dimensions:See Fig. 1. 5-5/8 (143) 3-1/4 (83) 1-1/8 (29) 2-1/8 (54) 3-15/16 (100) 1/16 (2) 6-1/8 (156) 4-1/8(105) 7/8 (22) 1-9/16 (40) 1/2 (13) M11313 Fig. 1. Thermostat dimensions in in. (mm). RECYCLING NOTICE If ...

Page 4 - providing temperature averaging network; Subbase Installation; Gently tap anchors (provided) into the drilled holes until

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 4 Fig. 3. Two T7047G Sensors providing temperature averaging network forT7100/Q7100 Thermostat/Subbase. M4838 T T SUBBASE T T T7047G T7047G T T M4839 T T SUBBASE T T T7047C T T T7047C T T T7047G M4840 T T T T SUBBASE...

Page 5 - WIRING

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 5 Fig. 8. Mounting the subbase. WIRING All wiring must comply with local electrical codes andordinances. Follow equipment manufacturer wiringinstructions when available. Refer to Fig. 16 through 21 fortypical hookups...

Page 6 - Mounting Thermostat on Subbase; Engage the tabs at the top of the thermostat and; Using Thermostat Keys; SETTINGS; System and Fan Settings; Table 5. Examples of Temperature Overrides.

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 6 Mounting Thermostat on Subbase Mount the thermostat on the subbase after the subbase isinstalled. 1. Engage the tabs at the top of the thermostat and subbase. See Fig. 10. 2. Press the lower edge of the case to clo...

Page 7 - Setting Keypad Lockout Switch; DIP switch 1 on back of thermostat.; INSTALLER SETUP; CAUTION; IMPORTANT

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 7 Always check the display to determine if the thermostat iscontrolling to the comfort, temporary or remote setpoint.Temporary is displayed when the Override key is pressed orthe occupancy sensor or remote setback ti...

Page 8 - Table 6. Thermostat Installer Setup Options.

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 8 Mode Number (Press i key Factory-Setting Other Choices (Press ▲ or ▼ key to change) Actual Select to change) Display Description Display Description Setting Application(T7100F only). 01 00 Conventionalequipment app...

Page 10 - Thermostat Information

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 10 INSTALLER SELF-TEST Use the Installer Self-Test to check the thermostatconfigurations and operation. Refer to Table 7 for a list of theavailable Self-Tests. To star t the Self-Test: NOTE: The minimum off time for ...

Page 12 - OPERATION; Thermal Performance

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 12 Selection Fan System Call Energize Display Auto Off None None None On Off None G Auto Cool None O None Auto Cool orAuto Stage 1Cooling O, G and Y or O,G and Y1 and Auto Cool orAuto Stage 2Cooling O, G and Y2 and A...

Page 13 - Fan Control; Table 11. Examples of Temperature Overrides.; heat and one-stage cool conventional system.

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 13 Minimum-Off Timing A minimum-off timer assures that the cooling compressor orheat pump compressor does not come on again for at leastfive minutes after it turns off. The minimum-off timer istriggered when the comp...

Page 15 - Includes remote temperature sensor, remote setback timer.; TROUBLESHOOTING GUIDE

T7100D,E,F MICROELECTRONIC COMMERCIAL THERMOSTATS AND Q7100A,C,D SUBBASES 68-0163—3 15 Fig. 22. Typical hookup of Q7100C1073 in three-stage heat, one-stage cool heat pump system. Includes remote temperature sensor, remote setback timer. TROUBLESHOOTING GUIDE EQUIPMENTMONITOR 2 L1(HOT) L2 M15325A FAN...