Honeywell Q682A- Manuals

Honeywell Q682A– User Manual, Manual in PDF format online.

Manuals:

User Manual Honeywell Q682A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Installation; WHEN INSTALLING THIS PRODUCT...; IMPORTANT: An incorrectly leveled subbase will cause; CAUTION; Disconnect power supply to prevent electri-; LOCATION; IMPORTANT: Save package of screws and instructions

69-0637—2 2 Installation WHEN INSTALLING THIS PRODUCT… 1. Read these instructions carefully. Failure to follow them could cause a hazardous condition. 2. Installer must be a trained experienced service techni- cian. 3. After installation is complete, check out product op- eration as provided in thes...

Page 3 - WIRE SUBBASE

3 69-0637—2 Outlet Box Mounting (Fig. 4) Use a horizontally mounted outlet box if possible. If a vertical outlet box is used, the subbase must be mounted ona 202689A Cover Plate Assembly (ordered separately).Follow the instructions provided with the cover plate as-sembly. Align the subbase mounting ...

Page 5 - HEATING/COOLING SYSTEM; If thermostat fails any test, refer to the Troubleshooting; TYPICAL WIRING DIAGRAMS

5 69-0637—2 Fig. 10—Temperature control levers. HEATING/COOLING SYSTEM Turn on power to the furnace and cooling system.Place the system switch lever to HEAT and fan switch lever to AUTO. Push both temperature setting levers together at least 5 ° F (3 ° C) above room temperature. The main burner shou...

Manual Honeywell Q682A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Installation; WHEN INSTALLING THIS PRODUCT...; IMPORTANT: An incorrectly leveled subbase will cause; CAUTION; Disconnect power supply to prevent electri-; LOCATION; IMPORTANT: Save package of screws and instructions

69-0637—2 2 Installation WHEN INSTALLING THIS PRODUCT… 1. Read these instructions carefully. Failure to follow them could cause a hazardous condition. 2. Installer must be a trained experienced service techni- cian. 3. After installation is complete, check out product op- eration as provided in thes...

Page 3 - WIRE SUBBASE

3 69-0637—2 Outlet Box Mounting (Fig. 4) Use a horizontally mounted outlet box if possible. If a vertical outlet box is used, the subbase must be mounted ona 202689A Cover Plate Assembly (ordered separately).Follow the instructions provided with the cover plate as-sembly. Align the subbase mounting ...

Page 5 - HEATING/COOLING SYSTEM; If thermostat fails any test, refer to the Troubleshooting; TYPICAL WIRING DIAGRAMS

5 69-0637—2 Fig. 10—Temperature control levers. HEATING/COOLING SYSTEM Turn on power to the furnace and cooling system.Place the system switch lever to HEAT and fan switch lever to AUTO. Push both temperature setting levers together at least 5 ° F (3 ° C) above room temperature. The main burner shou...

Honeywell Manuals