Honeywell Q674J- Manuals

Honeywell Q674J– User Manual in PDF format online.

Manuals:

User Manual Honeywell Q674J

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 2 - IMPORTANT: Thermostats are calibrated at the factory by; LOCATION; Recycling Notice; WHEN INSTALLING THIS PRODUCT...; CAUTION; Operation; interstage differential.

69-0435—10 2 IMPORTANT: Thermostats are calibrated at the factory by using subbases mounted at true level. Inaccurate sub-base leveling will cause thermostat control deviation. LOCATION Install the thermostat about 5 ft [1.5 m] above the floor in an area with good air circulation at averagetemperatu...

Page 3 - cable for proper wiring.; WIRING THE SUBBASE

3 69-0435—10 Fig. 2—Installation of Q674 Subbase on wall. WIRES THROUGHWALL OPENING WALL WALLANCHORS(2) SUBBASE MOUNTINGHOLES MOUNTINGSCREWS (2) M926 Fig. 3—Subbase components and levelingprocedure. SPIRIT LEVEL MOUNTING HOLES (2) M927 TOP MOUNTING HOLES (2) WIRINGTERMINAL THERMOSTATCABLE OPENING TO...

Page 8 - MOUNTING THE THERMOSTAT; Setting; SETTING THE HEAT ANTICIPATOR

69-0435—10 8 MOUNTING THE THERMOSTAT 1. Remove the thermostat cover by pulling the bot- tom edge of the cover away from the base until it snapsfree of the retaining posts. NOTE: The cover is hinged at the top and must be removed by pulling out at the bottom. 2. Carefully remove and discard the foam ...

Honeywell Manuals