Honeywell Q327A - Manuals

2 CONNECT PILOT GAS TUBING 1. Cut tubing to desired length and bend as necessary for routing to pilot burner. Do not make sharp bends or deformtubing. Do not bend tubing at control after compression nuthas been tightened, as this can result in gas leakage atconnection. 2. Square off and remove burrs...

INSERTORIFICE M27083 SPUDORIFICE INSERTORIFICE CROSS SECTION 3 69-0519—3 Fig. 7—Changing spud and insert orifices. Fig. 6—Bleed gas tube installation. THIS DIMENSION SHOULD BE MAXIMUM OF 3/8 INCH [9.5 mm] WHEN BLEED TUBE IS IN FINAL POSITION. BLEED TUBE CLIP M3284 1/8 IN. STEEL TUBING CHANGE INSERT ...

Service WARNING FIRE OR EXPLOSION HAZARDCAN CAUSE PROPERTY DAMAGE,SEVERE INJURY, OR DEATHPerform Gas Leak Test anytime work is done to thesystem. PILOT OUTAGE 1. If pilot flame goes out during normal operation, but is properly adjusted, recheck Mounting and Location instruc-tions on page 1. 2. If al...