Page 2 - This document is an unpublished work. Copyright
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 2 This document is an unpublished work. Copyright 2000 Honeywell, International, Inc. All rights reserved. This document and all information and expression contained herein are the pr...
Page 5 - Proprietary notice on title page applies; TABLE OF CONTENTS
Honeywell MK VI MK VIII EGPWS Installation Design Guide Proprietary notice on title page applies CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 5 TABLE OF CONTENTS SECTION I – GENERAL INFORMATION....................................................................................
Page 9 - SECTION V – CERTIFICATION 124
Honeywell MK VI MK VIII EGPWS Installation Design Guide Proprietary notice on title page applies CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 9 3.3.14.1 Instructions .......................................................................................................... ....
Page 12 - SECTION I
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 12 SECTION I GENERAL INFORMATION
Page 14 - SECTION I – GENERAL INFORMATION
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 14 SECTION I – GENERAL INFORMATION SECTION I – GENERAL INFORMATION............................................................................................ 16 1.1 I NTRODUCTION ........
Page 16 - construed as formal FAA approved work authorization.; How To Use This Docu m ent
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 16 SECTION I – GENERAL INFORMATION 1.1 Introduction The Honeywell MK XXII Enhanced Ground Proximity Warning System (MK XXII EGPW S) provides alerts and warnings to prevent controlled fl...
Page 17 - Reference Documents
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 17 1.4 Reference Documents Following is a list of Honeywell reference documents: 965-1590-601 Product Specification for the MK XXII Enhanced Ground Proximity Warning System (EGPWS) 993-...
Page 18 - Description of Equipm e nt; Fig 1.0 MK XXII EGPWC
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 18 1.5 Description of Equipm e nt The MK XXII EGPW S is a rack mount ground proximity warning (GPW S) and terrain display (TAWS) computer. Some of the system features include: ♦ Basic H...
Page 19 - MK XXII EGPWS Conf i guration Module; GPS antenna should meet the following qualifications:
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 19 1.5.1 MK XXII EGPWS Comp u ter The MK XXII EGPW S computer is available under P/N 965-1590-0XX with internal GPS. The MK XXII EGPW S computer is intended for Helicopters and provides...
Page 20 - pressure altitude with a corresponding reduction in accuracy.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 20 aircraft that do not have another compatible source of outside air temperature. Outside Air Temperature is used by the EGPW S along with pressure altitude in computing Geometric Alti...
Page 21 - FIGURE 1-1 MK XXII EGPWS SMART CABLE; MK XXII EGPWS
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 21 FIGURE 1-1 MK XXII EGPWS SMART CABLE 1.6 Technical Characteris t ics MK XXII EGPWS TSO Compliance: TSO-C92c, TSO-C151a, class A Physical size (HxWxD): 6.20” x 3.04” x 10.30” Weight: ...
Page 22 - GPS Antenna Sensor
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 22 Physical size: 2.68” x 1.51” x 0.32” (fits Positronic connector backshell) Weight: <1 pound with connector and backshell Mounting: Mounts to Positronic connector backshell Tempera...
Page 24 - Installation and Acces s ories Kits
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 24 1.8 Installation and Acces s ories Kits NOTE: Not all installation kits are immediately available, contact Honeywell Order Administration (425-885-8719) for availability. 1.8.1 MK XX...
Page 25 - Accessories Required but not Supplied
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 25 1.8.4 Terrain Database Card s The MK XII EGPWS Terrain Database Cards can be ordered using the following part numbers: Vendor Name Vendor P/N Description QTY UM Honeywell P/N Honeywe...
Page 28 - License Requirements
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 28 1.11 Tools Required 1.11.1 Crimping Tool - P1, P 2 , P3 Description UM QTY Vendor Name & Part Number Hand Crimping Tool EA 1 Positronic Ind. 9507 Hand Crimping Tool EA 1 Daniels ...
Page 30 - SECTION II
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 30 SECTION II INSTALLATION
Page 32 - SECTION II – INSTALLATION
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 32 SECTION II – INSTALLATION SECTION II - INSTALLATION .............................................................................................................................. 33 ...
Page 33 - SECTION II - INSTALLATION; NOTE; Unpacking and Inspec t ing the Equipment
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 33 SECTION II - INSTALLATION 2.1 Introduction This section contains suggestions and factors to consider before installing the Enhanced Ground Proximity Warning System. Close adherence t...
Page 34 - from excessive vibration, heat, and noise generating sources.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 34 2.3.2 MK XXII Computer Loc a tion Care should be exercised to avoid mounting components near equipment operating with high pulse current or high power outputs such as radar and satel...
Page 35 - Configuration Module Installation
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 35 E. Slide the EGPW S unit in the mounting tray, and secure it using the Hold Down latch. F. (After Continuity and Power check) Attach the cable harness to the front panel connectors a...
Page 36 - CONFIGURATION MODULE ASSEMBLY
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 36 D. Position Slide Lock and Spring Clip onto connector. E. Install Backshell Housing onto connector. The Ground wire (used for ESD discharge) is terminated with shielded pigtails insi...
Page 37 - INSTALLATION ASSEMBLY SEQUENCE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 37 INSTALLATION ASSEMBLY SEQUENCE STEP 1 Install all MK XXII system aircraft wiring to this connector using items 1.2 (Crimp Contacts) and item 1.1 (Connector). See figure 2-1.1 below. ...
Page 38 - MK XXII EGPWS CONFIGURATION MODULE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 38 STEP 2 Wire item 2.0 (Configuration Module). This part will replace item 1.4 (Backshell plate). Install the pre-crimped colored wires into item 1.1 (Connector) as shown in figure 2-1...
Page 40 - shielded pigtails of wires at this connector.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 40 STEP 4 Install item 1.3 (Backshell Housing) onto connector using item 1.8 (Screws) as shown in figure 2-1.4 below: Ground Wire (used for electrostatic discharge {ESD} protection) is ...
Page 46 - either the instrument panel or the edge of the glareshield.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 46 2.3.10.2 Location Cockpit layout, size and operator’s preference will determine if only one set of lights is used (i.e., mounted in the center), or if dual sets of lights are used (o...
Page 47 - MK XXII EGPWS Annunciators/Switches Location
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 47 FIGURE 2-1.8 MK XXII EGPWS Annunciators/Switches Location
Page 48 - Altitude Mode is also described below for reference.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 48 2.3.10.3 Inhibit Switch Functio n s and Selection The Terrain Inhibit and Audio Inhibit functions are optional but it is recommended that one be used to inhibit the system during cer...
Page 49 - FIGURE 2-2 MK XXII EGPWS OUTLINE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 49 FIGURE 2-2 MK XXII EGPWS OUTLINE
Page 50 - FIGURE 2-3 MK XXII EGPWS MOUNTING TRAY
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 50 FIGURE 2-3 MK XXII EGPWS MOUNTING TRAY Honeywell P/N 405-0383-001
Page 52 - SECTION III
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 52 SECTION III SYSTEM PLANNING
Page 54 - SECTION III – SYSTEM PLANNING
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 54 SECTION III – SYSTEM PLANNING SECTION III – SYSTEM PLANNING.................................................................. 57 3.1 I NTRODUCTION ......................................
Page 57 - System Wiring/ Electr i cal Interfaces
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 57 SECTION III – SYSTEM PLANNING 3.1 Introduction This section provides information for selecting features and wiring the electrical interfaces of the MK XXII EGPW S. Sample wiring diag...
Page 58 - The EGPW C provides for ARINC 453 and ARINC 429 serial outputs.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 58 3.2.3 GPS Antenna A GPS antenna connector is available on the front of the MK XXII EGPWS 965-1590-0XX. 3.2.4 Analog and Digital Inp u ts The analog and digital inputs to the MK XXII ...
Page 59 - inputs are valid and the audio inhibit discretes are not active.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 59 3.2.7 Audio Output The audio outputs consist of both an 8-ohm amplifier and a transformer isolated 600-ohm output. Audio output messages are provided as specified in the selected Aud...
Page 60 - Configurable Interface s; which has detailed interface configuration information.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 60 3.3 Configurable Interface s The following subsections define configurable interfaces for the EGPW S. Typical interface connection information and diagrams are provided. Use this in ...
Page 61 - digital air data types.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 61 not detect autorotation and thus do not provide the autorotation altitude callouts or advanced gear warnings. Mode 1 is inhibited in these types. The generic types are segregated int...
Page 62 - Uncorrected Baro Altitude
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 62 3.3.2.2 Examples 3.3.2.3 Analog altitude and 500 ohm OAT 62 43 9 25 63 44 53 J1 Altitude Out Signal Common BIT Out Analog Air Data Computer EGPW S MK XXII (+) (-) Uncorrected Baromet...
Page 63 - EGPWS MK XXII; Vendor Model
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 63 3.3.2.4 Digital – ARINC 429 (Cat. 2 ID 5, 1, 6) Air Data Type 1 (AZ-800 or equivalent) is a low speed, digital ARINC 429 signal having the air data labels 203, 206, 212, and 213. Air...
Page 65 - ohm probe using +5 volt excitation from the MK XXII EGPWC.; Vendor PN
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 65 3.3.2.6 Shadin 2000 (Cat. 2 ID 10) Air Data Type 10 (Shadin 2000 or equivalent) is a low speed, digital ARINC 429 signal having the air data labels 203, 204, 206, and 212. Total Air ...
Page 67 - CAUTION; know to have FOM computational errors:
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 67 3.3.3 Category 3 – Position Input Select Category 3 defines the Global Position System bus type and interface. GPS Input selection is available in the following formats: ARINC 429 lo...
Page 68 - EGPW S MK XXII; GND
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 68 3.3.3.Examples 3.3.3.1 ARINC 429 BUS (Cat. 3 ID 0,1,4,5) 25 8 A B J2 ARINC 429 GPS ARINC 429 Bus - Hi ARINC 429 Bus - Lo EGPW S MK XXII A B ARINC 429 GPS Bus ARINC429-GPS.vsd 429 GPS...
Page 70 - Autorotation callout enablement.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 70 3.3.4 Category 4 – Altitude Callouts Category 4 defines the Altitude Callout menu choices and Smart ‘500’ Callout selection along with Autorotation callout enablement. Appendix E Tab...
Page 71 - Category 5 defines one Audio Menu options for Helicopters (ID 128).
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 71 3.3.5 Category 5 – Audio Menu Select Category 5 defines one Audio Menu options for Helicopters (ID 128). 3.3.5.1 Instructions 1. Using Appendix E Tables E 3, Under Step/category 5 se...
Page 72 - Category 6 – Terrain Display Select; Display Configuration; Table E; Display Configuration Group, Display Input
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 72 3.3.6 Category 6 – Terrain Display Select Category 6 defines the Terrain Display options available. Appendix E Table E 3.1.6 defines the Terrain Display Select options ( Display Conf...
Page 73 - provided in the table below.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 73 3.3.6.3 Terrain Display Configuration Group This option provides the ability to specify the type of Terrain Display compatible with the aircraft configuration. A definition of each o...
Page 74 - TERR; Wx; Single Tube W
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 74 W X System R/ T J2-37 J2-36 J1-58 J1-59 J1-51 J1-32 A B A B ARI NC 453 T E RRAI N BUS #1 ARI NC 429 RANG E BUS J1-54 T e rrain Display Select #1 Discret e O u tput T e rrain Pop-Up D...
Page 75 - Display Mode, and Display status to the MK XXII EGPWC.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 75 3.3.6.4 Display Input Control Group This input bus is connected to the display (or display controller) and transmits Range settings, Display Mode, and Display status to the MK XXII E...
Page 76 - Honeywell Gr; RR; EGPW
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 76 Honeywell Gr im es TRA-45A J2 J1 J1 J1 28 13 1 3 28 13 1 3 37 36 41 40 58 59 56 57 TE RR INHIB TE RR INOP Lam p Tes t 28V Lam p Di m m ing B u s A lternate A c ti on 12 55 EGPW S TRA...
Page 77 - XLS
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 77 Honeywell GNS- XLS J2 J1 J101 J101 N5 N6 Q4 Q6 N5 N6 Q4 Q6 37 36 25 8 41 40 58 59 56 57 TE RR INHIB TE RR INOP Lam p Tes t 28V Lam p Di m m ing B u s A lternate A c ti on 12 55 EGPW ...
Page 78 - AVIDYNE FSD
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 78 AVIDYNE FSD J2 J1 J5 J5 17 35 4 22 17 35 4 22 37 36 41 40 58 59 56 57 TE RR INHIB TE RR INOP Lam p Tes t 28V Lam p Di m m ing B u s A lternate A c ti on 12 55 EGPW S AVIDYNE FSD AVID...
Page 79 - Integr; Honeywell W
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 79 Integr ated Pr im us 440/660/880 J2 J1 F G M L 37 36 41 40 58 59 56 57 TE RR INHIB TE RR INOP Lam p Tes t 28V Lam p Di m m ing B u s A lternate A c ti on 12 55 EGPW S Honeywell Radar...
Page 80 - AVTECH DSU
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 80 AVTECH DSU Primus WXR UDI J2 J1 J1 8 9 47 48 37 36 41 40 58 59 56 57 TE RR INHIB TE RR INOP Lam p Tes t 28V Lam p Di m m ing B u s A lternate A c ti on 12 55 EGPW S AVTECH DSU A B AR...
Page 81 - Table E 3
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 81 3.3.7 Category 7 – Options Select Group #1 Category 7 enables/disables the following Options: Steep Approach (not available in MkXXII), TA&D Alternate Pop Up, Peaks Mode, Obstacl...
Page 82 - For Helicopters TA&D Alternate Pop Up should always be set to False.; displays terrain based on the absolute terrain elevations.; Note: TAD must be enabled if Obstacle Awareness is enabled.; appropriate for this installation.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 82 For Helicopters TA&D Alternate Pop Up should always be set to False. 3.3.7.4 Peaks Mode Peaks mode is an alternate means of displaying terrain data. The standard terrain display ...
Page 83 - WOW Reversal
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 83 3.3.7.8 WOW Reversal The WOW discrete input is defined in Category 13. The Category 7 control is used to reverse the defined logic to match aircraft wiring, if necessary. +28 VDC WOW...
Page 84 - Category 8 – Radio Altitude Input Select; Radio Altitude; Radio Altimeter Indicator
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 84 3.3.8 Category 8 – Radio Altitude Input Select Category 8 defines the Radio Altitude and Decision Height interface. 3.3.8.1 Instructions 1. Using Appendix E Tables E 3, under Step/ca...
Page 86 - Category 9 – Navigation Inputs Select; Appendix E Table E 3
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 86 3.3.9 Category 9 – Navigation Inputs Select Category 9 selects the Glideslope and Localizer Deviation interfaces and Glideslope Validity and ILS Tuned discretes. Appendix E Table E 3...
Page 87 - ILS Receiver; Low Level
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 87 3.3.9.2 Example 3.3.9.3 Analog Glideslope Interface (cat. 9 ID 0,1,5) J2 ILS Receiver EGPWS MK XXII GS Valid +28 11 + - Low Level GS Valid +28 GND ILS Tuned + - GS Deviation 65 46 30...
Page 88 - ILS Bus
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 88 3.3.9.4 Digital Glideslope/Localizer Interface 22 5 J2 ILS Bus A B EGPWS MK VI / MK VIII A B ARINC 429 ILS ARINC 429Low Speed Vendor Model ARINC 429 Bus 1 ARINC 429 Bus 2 A B A B Hon...
Page 89 - 0 Category 10 – Attitude Input Select; Appendix E Tables E 3 and Table E 3.1.10
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 89 3.3.10 Category 10 – Attitude Input Select Category 10 defines the Roll and Pitch Attitude interface. 3.3.10.1 Attitude Signals Roll Angle is used for Bank Angle callout, Pseudo Alti...
Page 90 - Vertical Gyro; Roll Synchro
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 90 3.3.10.3 Example 3.3.10.4 Analog Roll Angle (Synchro) 576 1 21 2 J1 Vertical Gyro X Y EGPWS MK XXII Roll Angle Z X Y Roll Synchro Z X Y Pitch Synchro Z X Y Z Pitch Angle Vendor Model...
Page 91 - AHRS; HS
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 91 3.3.10.5 Digital ARINC 429 High Speed Attitude Input ID 128 (Litef LCR 92S or equivalent) is a high speed, digital ARINC 429 signal having roll pitch angle, and roll pitch rate label...
Page 92 - 1 Category 11 – Heading Input Select
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 92 3.3.11 Category 11 – Heading Input Select Category 11 defines the Magnetic Heading interface. Appendix E Table E 3.1.11 defines the Heading Input Select types and identifies the firs...
Page 93 - Directional Gyro; Heading Synchro; Heading; 6 VAC Reference; Heading Ref
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 93 3.3.11.3 Example 3.3.11.3.1 Analog Heading (Synchro) (CAT. 11 ID 0) 22 23 3 J1 Directional Gyro X Y EGPW S MK XXII X Y Heading Synchro Heading Z Z H C 4 24 26 VAC Reference H C Headi...
Page 95 - 2 Category 12 – Windshear Input Select; Category 12 defines the Windshear interface.; Windshear is not applicable to MK XXII.; Select ID 0 for all helicopter configurations.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 95 3.3.12 Category 12 – Windshear Input Select Category 12 defines the Windshear interface. Windshear is not applicable to MK XXII. 3.3.12.1 Instruction Select ID 0 for all helicopter c...
Page 96 - Appendix E Table; This; ICD; Additional information for the discretes is provided below.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 96 3.3.13 Category 13 – Input / Output Discrete Type Select Category 13 defines the input and output discretes not defined as part of any of the other Categories. Appendix E Table E 3.1...
Page 100 - Appendix E Section 7.4
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 100 3.3.13.12 Timed Audio Inhibit Discrete The Timed Audio Inhibit will cause the inhibiting of all audio messages for a period of 5 minutes or until reset. The discrete input is connec...
Page 101 - the remaining alerts and warnings.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 101 For Lamp Format Type 1, the amber “Below G/S” lamp is driven by the GPW S Alert (Glideslope only) discrete and the red “GPW S” lamp is driven by the remaining alerts and warnings. F...
Page 102 - switch-lamp assemblies mounted near the displays being selected.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 102 3.3.13.22 Terrain Display Select #1 & #2 Discrete Terrain Display Select #1 & #2 discrete (J1-54 & J1-49) will activate after the related pilot has initiated manual sele...
Page 103 - Table 0-1 MKXXII EGPWS – Example Cockpit Lights
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 103 Table 0-1 MKXXII EGPWS – Example Cockpit Lights
Page 104 - as described above, select the Audio Output; Appendix E Table E 3.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 104 3.3.14 Category 14 – Audio Output Level Category 14 controls the Audio Output level for alert menu callouts (cautions and warnings). Refer to Category 13 for information on the Mode...
Page 105 - defines the Autorotation threshold options.; Appendix E
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 105 3.3.15 Category 15, Autorotation Threshold Category 15 controls the Autorotation Threshold level used for Autorotation detection. Actual thresholds are determined during first of ty...
Page 106 - AUTOROTATION THRESHOLD; Aircraft Type ID
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 106 AUTOROTATION THRESHOLD Aircraft Type ID Aircraft Model Threshold % Threshold ID 128 S-76 B/C+ 7.5 15 129 S-76C/A++ 7.5 15 130 S-76A/A+ 7.5 15 131 Bell 212 6 12 131 Bell 412 6 12 132...
Page 107 - SECTION IV
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 107 SECTION IV CONFIGURATION MODULE PROGRAMMING AND REGIONAL TERRAIN DATABASE LOADING
Page 108 - SECTION IV – CONFIGURATION MODULE PROGRAMMING AND
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 108 SECTION IV – CONFIGURATION MODULE PROGRAMMING AND REGIONAL TERRAIN DATABASE LOADING SECTION IV – CONFIGURATION MODULE PROGRAMMING AND REGIONAL TERRAIN DATABASE LOADING .................
Page 109 - that will be operating outside of the North American region.; Harness Checkout and Power Check; potential areas that may cause binding and/or chafing.; Unit Installation; for the unit locations and mounting information.; EGPWC Initialization a n d Configuration; for instructions related to using the WinViews software.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 109 SECTION IV – CONFIGURATION MODULE PROGRAMMING AND REGIONAL TERRAIN DATABASE LOADING 4.1 Introduction The following procedures outline the steps necessary to accomplish a complete con...
Page 110 - configured as follows:; (Windows Virtual Interface to the Enhanced Warning System); Configuration Module.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 110 parameters, for testing purposes, without altering its operation. The monitoring of these parameter values enables the operator to quickly determine if the EGPW C is using the correc...
Page 111 - Configuration Module Programming
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 111 To obtain a copy of the WinVIEWS software, contact: Honeywell Aerospace Electronic Systems PO Box 97001 Redmond, W A 98073-9701 USA Attn: Order Administration M/S 33 Phone: (425) 885...
Page 112 - Invalid Parameter. Not enough
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 112 - CUW<space>0 is the command and version number. CUW writes the category ID’s defined by version 0 definition (0 is the only version currently available) to the Configuration M...
Page 114 - Configuration Module Reprogramming; Power EGPWC and PC and start WinVIEW S.; prompt use the CAT command with the following structure:
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 114 Category 7 ID: 29 Category 8 ID: 1 Category 9 ID: 0 Category 10 ID: 2 Category 11 ID: 0 Category 12 ID: 0 Category 13 ID: 129 Category 14 ID: 0 Category 15 ID: 15 CRC: 527518533 4.5....
Page 115 - display the EGPWC and Configuration Module data.; Regional Terrain Data b ase Loading; in the Terrain Awareness function being unavailable.; On The Bench. An optional verification procedure is provided.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 115 associated ID is read from the Configuration Module and listed on the PC display. Alternately, when not in the Configuration sub-mode, the command “PS<Enter>” (Present Status) ...
Page 117 - COMPUTER OK LED on the EGPWC front panel is on.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 117 4.6.5 Accomplishment Instr u ctions Load the PCMCIA card data as described in paragraphs 4.6.5 A. or 4.6.5 B. below. Loading time will be approximately 70 minutes. A. Loading the PCM...
Page 118 - (5) Insert the PCMCIA card into the Smart Cable PCMCIA card slot.; and the COMPUTER OK LED on the EGPWC remains OFF.; the contents of the PCMCIA card were successfully transferred.; Verification of the Ter r ain Database Version
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 118 (3) Connect the Smart Cable (Honeywell PN 951-0386-001) to the EGPW C J3 connector. (4) Turn the Power Supply ON and verify the COMPUTER OK LED on front of the EGPWC panel is on. (5)...
Page 119 - SYSTEM CONFIGURATION; versions will follow the same pattern.; END OF TEST
Honeywell MK XXII EGPWS Installation Manual CAGE CODE:97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 119 to continue from level-to-level, the ST button must also be ‘pressed and held’ for more than 0.5 seconds, but less than 2 seconds, which is identical to the Short Cancel function. Th...
Page 121 - SECTION V
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 121 SECTION V CERTIFICATION
Page 124 - SECTION V – CERTIFICATION; Certification Procedur e; 37 with an applicable STC package.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 124 SECTION V – CERTIFICATION 5.1 Introduction This section outlines the procedures required to obtain FAA approval for the MK XXII EGPW S installation. 5.2 Certification Procedur e 5.2...
Page 127 - APPENDIX A
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 127 APPENDIX A CUSTOMER WORKSHEET
Page 129 - ENH; COCKPIT DISPL
MK XX II E GPWS ENH A N CED GROUND PROXIMITY W A R N ING SYSTEM CAG E CO DE: 97896 SCALE: NO NE SIZE: A D W G NO : 06 0-431 4-22 5 R EV: C SHEET 12 8 T he pur pos e f o r th is w o rk s heet is to obt ai n th e nec es s a ry a ir c ra ft data f o r det er m ining th e s pec if ic inter fa c e c onf ...
Page 131 - RA; PEN
MK XX II E GPWS ENH A N CED GROUND PROXIMITY W A R N ING SYSTEM CAG E CO DE: 97896 SCALE: NO NE SIZE: A D W G NO : 06 0-431 4-22 5 R EV: C SHEET 13 0 DISCRETE INPUTS: Ple as e c hec k appl ic ab le box es f o r both up an d do wn pos it ions . PA RA M E T E R G N D O PEN +28 VDC DH > ° > ° WO ...
Page 139 - APPENDIX B
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 139 APPENDIX B SAMPLE WIRING DIAGRAMS
Page 143 - APPENDIX C
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 143 APPENDIX C WinViews OPERATION INSTRUCTIONS
Page 145 - APPENDIX C – WinViews Operation Instructions; RS-232 COMMUNICATION WITH THE EGPWS; EGPWS Front Connector
Honeywell MK XXII Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 145 APPENDIX C – WinViews Operation Instructions RS-232 COMMUNICATION WITH THE EGPWS The EGPW S contains software that allows monitoring of its internal parameters, for testing purposes, with...
Page 146 - Windows Virtual Interface to the Enhanced Warning System; quick identification of system anomalies.
Honeywell MK XXII Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 146 WinVIEWS OPERATION: Windows Virtual Interface to the Enhanced Warning System WinVIEWS software is a tool developed by Honeywell to monitor or view values within the EGPW S. The WinVIEW S ...
Page 149 - APPENDIX D
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 149 APPENDIX D VENDOR DRAWINGS
Page 151 - D 1-0 Vendor Contact Information
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 151 D 1-0 Vendor Contact Information The vendor contact information provided below is current at the time of publication of this document. AMP 2800 Fulling Mill RoadMS 038-035Middletown...
Page 153 - EDMO; Switch
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 153 D1-1 EDMO EDMO Distributors (800)235-3300 – “One Stop Shopping” for the following EGPWSand TAWS support products: * MD41-12XX/13XX TAWS ACU’s from Mid-Continent Instruments * 90-448...
Page 154 - EMTEQ; GPS - RF Cable Sets
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 154 D1-2 EMTEQ EMTEQ, Inc. supports all EGPW S/TAWS systems manufactured by Honeywell, Inc. by offering products to help complete your installation. The installation provisions are full...
Page 155 - TABLE 1
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 155 TABLE 1 Table 1.A. (Teflon ® Jacketed RF Coax) (High Temp) Cable Type Loss @ 1600 Mhz O.D. Bend Radius P/N Per 100 ft (inches) Minimum TFLX130-100 21.60 dB 0.130 “ ½” TFLX165-100 17...
Page 156 - TABLE 2
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 156 TABLE 2 Table 2.A.1 Connectors (for TFLX cable series) - GPS GPS Connector Type Application Description TFLX130-100 TFLX165-100 TFLX205-100 TNC male Antenna Straight TMS130-1 TMS165...
Page 158 - Tool Frame and Die Part Numbers
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 158 Tool Frame and Die Part Numbers Mil-Spec P/N Daniels Cable Type for Hex Die P/N for Hex Die Tool Frame Die Hex PFLX195 M22520/5-19 Y142 M22520/5-01 (HX4) B Hex PFLX200 M22520/5-19 Y...
Page 159 - Installation Considerations:; help in the configuration and meet your requirements.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 159 Installation Considerations: Meeting the specifications when faced with a long cable run could be challenging at some times. Solutions typically are found when combining a Low Loss ...
Page 160 - Aerospace Optics; Aerospace Optics Inc.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 160 D1-3 Aerospace Optics Aerospace Optics Inc. Aerospace Optics Inc. is pleased to support the Honeywell EGPWS/TAWS teamwith our line of Vivisun LED lighted switches and indicators. We...
Page 162 - StacoSwitch; Please check out our full line of products at
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 162 D1-4 StacoSwitch StacoSwitch As a supplier of high reliability switches and indicators for avionics since 1958,StacoSwitch is proud to be integrated with many Honeywell products and...
Page 163 - APPENDIX E
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 163 APPENDIX E INTERFACE DESCRIPTION DOCUMENT
Page 166 - INTRODUCTION; XXX = Application Software (including Configuration Software); PURPOSE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 166 INTRODUCTION E 1 PART NUMBER This document is the Interface Description for the MKXXII Helicopter Enhanced Ground Proximity Warning System(EGPWS) part number 965-1590-0XX. The MK XX...
Page 168 - DC ANALOG INPUTS
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 168 3 Note that this is not a floating input. +28 VDC must be applied to both PWR_H and +28 VDC Return to both PWR_L inputs. E 4.2.3 DC ANALOG INPUTS Unless otherwise specified, Input S...
Page 169 - BAROMETRIC ALTITUDE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 169 When used as a validity input:Active Voltage Range (Logic True) +160 to +840 mVDC Inactive Voltage Range (Logic False) 0 to 50 mVDC Broken Wire Detect Input will be biased less than...
Page 170 - AC ANALOG INPUTS; SYNCHRO MAGNETIC HEADING
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 170 E 4.2.7 AC ANALOG INPUTS Unless otherwise specified, Input Signal accuracy is1% linearity +0.1% full scale offset E 4.2.7.1 SYNCHRO ROLL ATTITUDE Quantity 1 Input Impedance: X leg &...
Page 171 - CONFIGURATION DEFINED SYNCHRO INPUTS; SIGNAL TIMING REFERENCE INPUTS
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 171 E 4.2.7.3 CONFIGURATION DEFINED SYNCHRO INPUTS Quantity 3 Input Impedance: X leg > 140 K Ω Input Impedance: Y leg > 140 K Ω Input Impedance: Z leg > 140 K Ω Maximum Reverse...
Page 174 - DISCRETE INPUTS; +28 VDC Discrete Characteristics
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 174 E 4.2.9.4 AIR DATA RS-232 DIGITAL SERIAL BUS (SERIAL PORT 2) One port is provided for use with Air Data computer or Static Pressure Sensor interfaces. This port is common with the A...
Page 175 - Ground Discrete Characteristics; CONFIGURATION MODULE INTERFACE; Output to Config Module; INTERFACE OF EGPWS OUTPUTS TO CONFIGURATION MODULE; GPS ANTENNA INPUT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 175 The Ground discretes are internally biased via a pull up resistor, and are externally pulled down to ground when active. Thecharacteristics of each Ground discrete input are as foll...
Page 176 - OAT VOLTAGE REFERENCE OUTPUT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 176 E 4.2.13 OAT VOLTAGE REFERENCE OUTPUT This output is an accurate voltage source for 500 Ω resistive temperature sensors. Quantity 1 Output Voltage 5.000 VDC ± 10 mVDC (no load) Nomi...
Page 177 - ARINC DIGITAL SERIAL OUTPUT BUSSES
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 177 • If a ‘soft’ Glideslope alert is being issued (given 6 dB below nominal alert volume level). • If a Self Test is in progress, alerts are given 6 dB below nominal alert volume level...
Page 178 - FRONT PANEL TEST INTERFACE
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 178 E 4.2.17.2 ARINC 453 OUTPUT BUS Quantity 2 Format 1600 bit Manchester BI-phase per ARINC 708A Data Rate 1 Mb per second Word/Frame Structure Refer to Section 7.2 Data definition Ref...
Page 179 - PCMCIA / SMARTCABLE PORT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 179 E 4.2.18.2 PCMCIA / SMARTCABLE PORT One port is provided which meets the Motorola SPI characteristics. The PCMCIA / SmartCable interface allows for both theuploading, and downloadin...
Page 180 - AIRCRAFT APPLICATION DATA
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 180 E 5 AIRCRAFT APPLICATION DATA This section describes the MK XXII EGPWS interfaces for aircraft applications. Section E 5.1 is a listing of the selectioncategories defining the vario...
Page 181 - Signal; Ident No
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 181 TABLE E 3 CATEGORY ID SELECTION PROCEDURE Step (Category) Signal Selection Instruction Ident No . 1 Selects: a) AircraftType b) Mode Type Using Table 5.3.1, and any sub-tablescontai...
Page 182 - E 5.3 CONFIGURATION SELECTION TABLES
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 182 Step (Category) Signal Selection Instruction Ident No . 9 Selects: a) Glideslopeand/orLocalizerSource Using Table 5.3.9, and any sub-tablescontained within, locate the desiredNaviga...
Page 184 - Torque; DESCRIPTION; Effectivity; Helo, Agusta 109E Power, Retractable Gear
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 184 TABLE E 3.1.1: HELICOPTER TYPE ID AND TORQUE INPUTS FOR EGPWS MK XXII ID Torque Type DESCRIPTION Effectivity Table (E 3.1.1-x) App. Cfg. 128 0 Helo, S-76B/C+, Retractable Gear -003 ...
Page 185 - ENGINE TORQUE DATA SELECTION
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 185 E 5.3.1.2 ENGINE TORQUE DATA SELECTION WHEN A SINGLE ENGINE HELICOPTER IS ADDED TO THIS SECTION, IT NEEDS TO BE TREATED AS IF THERE WERE TWO ENGINES VIA AIRCRAFT WIRING. THE SRD REQ...
Page 189 - CATEGORY 2, AIR DATA INPUT SELECT; Description
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 189 E 5.3.2 CATEGORY 2, AIR DATA INPUT SELECT The following table provides identification of the Air Data source type. The entry in the Air Data Type corresponds to atable that provides...
Page 190 - Temperature Probe only.; Configuration Data; Derive Baro Altitude Rate
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 190 TABLE E 3.1.2-0: AIR DATA INPUT SELECT #0 SIGNAL CONNECTION SUMMARY DATA Uncorrected BarometricAltitude (+) = J1-62(-) = J1-43 Format: DC with Validity FlagInput Type: BasicFault De...
Page 195 - CATEGORY 3, POSITION INPUT SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 195 TABLE E 3.1.2-12: AIR DATA INPUT SELECT #12 SIGNAL CONNECTION SUMMARY DATA Uncorrected BarometricAltitude (+) = J1-62(-) = J1-43 Format: DC with Validity FlagInput Type: BasicFault ...
Page 196 - *Slowest acceptable update rate in milliseconds.; *Slowest acceptable update rate in milliseconds.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 196 MSL type. The Universal GPS1000 based GPS sources are of WGS-84 type. If the internal GPS source (ID=2) is defined,the GPS altitude reference in Category 7 must be MSL. Note 2: Univ...
Page 197 - * Slowest acceptable update rate in milliseconds.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 197 TABLE E 3.1.3-2: POSITION INPUT TYPE 2 (INTERNAL RS-232 GPS) CHANNEL GPS_RXA GPS_TXA Internal GPS [XPGPS_Int] = 1 (9600 baud) Fault Designation: INTERNAL GPSBus Type: Basic Internal...
Page 198 - Fault Designation: GPS BUS 1
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 198 TABLE E 3.1.3-5: POSITION INPUT TYPE 5 (HIGH SPEED ARINC 743 GPS) CHANNEL 429RX_4 CONNECT TO: GPS (High Speed) per ARINC 743 Fault Designation: GPS BUSBus Type: Basic A = J2-25 B = ...
Page 199 - CATEGORY 4, ALTITUDE CALLOUTS; t Callout function will not be given if in autorotation
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 199 E 5.3.4 CATEGORY 4, ALTITUDE CALLOUTS The following table provides identification of the Altitude Callouts Menu. Each entry in the ID column corresponds to aparticular menu selectio...
Page 201 - CATEGORY 5, AUDIO MENU SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 201 E 5.3.5 CATEGORY 5, AUDIO MENU SELECT The following table provides identification of the Voice Menu type. Each entry in the Voice Menu column has acorresponding table that provides ...
Page 202 - CATEGORY 6, TERRAIN DISPLAY SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 202 E 5.3.6 CATEGORY 6, TERRAIN DISPLAY SELECT Section Overview The following table (5.3.6) has an identification number (ID) associated with each Terrain Display configuration. Each of...
Page 204 - KC Picture Bus
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 204 Table E 3.1.6-0 KC Picture Bus DISPLAY CONFIGURATION GROUP 0 (KC PICTURE BUS 2 ) Function Value Display Type KC Picture Bus (KCPB) Sweep Type Curtain (Vertical or Horizontal scan) C...
Page 217 - Function; Display Input Control Group 2
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 217 Table E 3.1.6-16 Bendix IN182A/IN812A Radar display (RDR 2000) Function Value Reference section Display Type Bendix IN182A/IN812A color Radar Display (RDR-2000 radarsystem) Sweep Ty...
Page 218 - Channel
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 218 Output 429 Bus Group 0 Channel Pins Comments 429TX_1 (Low Speed) A = J2-43B = J2-42 Transmits (Section 7) Label sets: 7.1.1.x, 7.1.2.x, 7.1.3.x, 7.1.4.x, and7.1.6.x 1 429TX_2 A = J2...
Page 221 - K C P ictu re B u s w /o p resen tation of T errain A w aren ess C orrected; Display Input Control Group 0
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 221 Table E 3.1.6-18 K C P ictu re B u s w /o p resen tation of T errain A w aren ess C orrected A ltitu d e Function Value Reference section Display Type KC Picture Bus (KCPB) Sweep Ty...
Page 223 - Display Input Control Group; Fault Designation: IOC BUS 1
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 223 Table E 3.1.6-235 Display Configuration (Collins ProLine II, 5x6, and ProLine 4) Function Value Reference section Display Type Collins ProLine II (5x6) Sweep Type Standard with +/-6...
Page 224 - Display Input Control
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 224 Table E3.1.6-236 Display Configuration (Collins ProLine IV, 5x6) Function Value Display Type Collins ProLine IV (5x6) Sweep Type Standard with +/-60 degree limit Category 7, Options...
Page 226 - Display Configuration Group 0 (KC Picture Bus; Display Input Control Group 245
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 226 Table E 3.1.6-242 KC Picture Bus Display Configuration Group 0 (KC Picture Bus 1 ) Function Value Display Type KC Picture Bus (KCPB) Sweep Type Curtain (Vertical or Horizontal scan)...
Page 229 - The display will change to Map mode.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 229 • If the display is in normal MFD mode (not HSI backup, or SG backup) AND if Label 051 bit 11 transitions from 0to 1 (rising edge), AND Checklist is not selected on the MFD, and TCA...
Page 230 - Display Configuration Group 255 (Honeywell SPZ8000 older style); Display Input Control Group 255; Fault Designation: DISPLAY BUS 1
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 230 Table E 3.1.6-255 Honeywell SPZ8000 (w/ SCI range) Display Configuration Group 255 (Honeywell SPZ8000 older style) Function Value Display Type Honeywell (5x6) (SPZ8000) older style;...
Page 231 - CATEGORY 7, OPTIONS 1 SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 231 E 5.3.7 CATEGORY 7, OPTIONS 1 SELECT The following table provides identification of the Options Select Group #1. Each entry in the ID column corresponds to aparticular combination o...
Page 233 - CATEGORY 8, RADIO ALTITUDE INPUT SELECT; In this category, only the following signals are defined:
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 233 E 5.3.8 CATEGORY 8, RADIO ALTITUDE INPUT SELECT The following table provides identification of the Radio Altitude type. The entry in the Radio Altitude Type corresponds to atable th...
Page 236 - CATEGORY 9, NAVIGATION INPUT SELECT; Glideslope source selection.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 236 E 5.3.9 CATEGORY 9, NAVIGATION INPUT SELECT The following table provides identification of the Navigation type. The entry in the Navigation Type corresponds to a tablethat provides ...
Page 237 - KN40 Nav Source
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 237 TABLE E 3.1.9-1: NAVIGATION INPUTS SELECT 1 SIGNAL CONNECTION SUMMARY DATA Glideslope Deviation (+) = J1-65(-) = J1-46 Format: ARINC 547 with Low Level Validity & ILS SelectInpu...
Page 238 - CATEGORY 10, ATTITUDE INPUT SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 238 E 5.3.10 CATEGORY 10, ATTITUDE INPUT SELECT The following table provides identification of the Roll Attitude Angle type. The entry in the Attitude Input Selectcorresponds to a table...
Page 240 - CATEGORY 11, HEADING INPUT SELECT
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 240 E 5.3.11 CATEGORY 11, HEADING INPUT SELECT The following table provides identification of the Heading type. The entry in the Heading Input Select corresponds to a tablethat provides...
Page 241 - CATEGORY 12, WINDSHEAR INPUT SELECT; The Windshear warning is not applicable to Helicopters.; No Windshear
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 241 E 5.3.12 CATEGORY 12, WINDSHEAR INPUT SELECT The Windshear warning is not applicable to Helicopters. The following table provides the definition of Windshear Input Select ID 0, whic...
Page 242 - CATEGORY 13, INPUT / OUTPUT DISCRETE TYPE SELECT; Discrete Type
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 242 E 5.3.13 CATEGORY 13, INPUT / OUTPUT DISCRETE TYPE SELECT The following table provides identification of the Input/Output Discrete Type. Each entry in the Input/Output Discrete Type...
Page 243 - Lamp Format
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 243 TABLE E 3.1.13-128: INPUT/OUTPUT DISCRETE TYPE 128 CONN PIN # CHANNEL DESIGNATION REFERENCE PIN TYPE PIN FUNCTION Polarity/Configuration J1-38 28V_DISC_02 Input +28V Glideslope Inhi...
Page 245 - CATEGORY 14, AUDIO OUTPUT LEVEL; Volume Select; Nominal
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 245 E 5.3.14 CATEGORY 14, AUDIO OUTPUT LEVEL The following table provides identification of the Audio Output Level Select. Each entry in the ID column corresponds to aparticular nominal...
Page 246 - CATEGORY 15, AUTOROTATION THRESHOLD; Autorotation
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 246 E 5.3.15 CATEGORY 15, AUTOROTATION THRESHOLD The following table provides identification of the Autorotation Threshold. Each entry in the ID column corresponds to anengine torque th...
Page 247 - CONNECTOR INTERFACE; Pin
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 247 E 6 CONNECTOR INTERFACE E 6.1 PINOUT FOR FRONT CONNECTORS SORTED BY PIN NUMBER TABLE E 4: PIN ASSIGNMENT FOR FRONT CONNECTORS SORTED BY PIN NUMBER Connector - Pin Channel Designatio...
Page 249 - *Refer to Category 13 where multiple uses are possible.
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 249 Connector - Pin Channel Designation Reference Signal Usage Summary* J2-26 429TX_2A EGPWS ARINC 429 Output #2 (A leg) J2-27 422_232TX_2A ADC RS-232 / 422 Output (A leg) J2-28 GND GPS...
Page 252 - DEFINITIONS; Acronym
Honeywell MK XXII EGPWS Installation Manual CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C SHEET 252 E 7 DEFINITIONS The following acronyms are provided for use with this document: Acronym Interpretation AAAS Alternate Audio Alert Select ADC Air Data Computer ADS Air Data System AG...
Honeywell DT8050A
Installation Manual
Honeywell DT8050
Manual
Honeywell TPFIT25WK
User Manual
Honeywell TPFIT32AWK
User Manual
Honeywell 24DX47
User Manual
Honeywell TPFIT50PWK
User Manual
Honeywell TPFIT50WK
User Manual
Honeywell 00010
User Manual
Honeywell ADVBLEWIFI
Manual