Honeywell MAGIC STAT CT3100- Manuals

PROGRAMMING AND SETTING You will program your thermostat once for the entire year, entering your temperatures for both the heating and air conditioning seasons. You may enter heating temperatures between 54° F and 82° F, and cooling temperatures between 62° F and 88 ° F. A cool setting above 88 ° F ...

A Program Press and release. The display shows PRO- ^ GRAM with the time 12:00 AM. Enter Your First Program Enter a Program Point I Time Heat Press until the time you want the temperature change to occur is displayed; hold the button down to move time ahead; tap to move back (6:00 AM shown in exampl...

A Program Press to review the points you have already set. Hold the button to move forward to the next program; tap to set back. When you are satisfied that the first day’s entries are correct, proceed to setting the day and clock. Setting the clock will automatically copy the program into all 7 day...

Time Press to set the correct hour; note AM or PM ( 1:00 PM shown). * 11 »# Kimfimf S€T CLOCK S M T T F S MODE Press. Display will show the minutes flashing. »Jtjiiji SET CLOCK S H T T \F S Time Press to set the correct minutes (1 ;15 PM shown). 1 2 69-8023—2 MODE Press to return to normal temperatu...

CHANGING Changing One Day’s Program ^ Program Hold until the program you wish to change is displayed. Be sure you are on the day you wish to change (Saturday at 6:00 AM is shown). Heat or Cool Hold and watchthedots underthetemperature scale disappear. When they are gone, the pro­gram has been elimin...

To move clock back an hour in the fall... ^ MODE Tap until SET CLOCK shows and the hour is flashing. Time Tap until the clock backs up one hour. SET CLOCK ■ H T W T F (i) MODE Tap until normal temperature display returns. fLf 8 y T W T F 8 16 Temporarily Overriding Your Program A short term override...

MODE Tap until MANUAL is displayed. I Up or ' Down Close thermostat door, press to adjust tem­perature to desired setting (62° F shown). MODE When you want to cancel manual override, tap repeatedly until normal temperature display shows. 18 TROUBLESHOOTING Your thermostat requires little or no atten...

Troubleshooting, œntinued PROBLEM CHECK ACTION Display goes blank for several minutes during long furnace burn cycle, then recovers. —air filter and fan belt. Replace if necessary. —possible power interruptions during part of furnace cycle. May require isolating relay to eliminate power interruption...

Troubleshooting, continued PROBLEM CHECK ACTION Thermostat will not —number of heating and cooling Reset thermostat; re-enter program. allow you to make temperature combinations in a temperature your weekly program; thermo- setting. stat will accept a maximum of eight. Toll-free Installation and Pro...

LIMITED ONE-YEAR WARRANTY Honeywell warrants all products listed in this book to be free from defects in workmanship or materials, under normal use and service, for a period of one ( 1 ) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defect...