Page 3 - SECURING THE PREMISES
– 3 – TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS SYSTEM OVERVIEW .................................................................................................................................. 5 Features ...................................................................
Page 4 - System
– 4 – TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS SYSTEM FUNCTIONS .............................................................................................................................. 74 Testing the System ...........................................................
Page 5 - General Information; IMPORTANT SECURITY NOTICE; Stay and Away arming modes:
– 5 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features General Information This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a touch screen control for system operation, vario...
Page 6 - Text; Zones
– 6 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features • Device activation: Allows you to send “Follow-Me” or e-mail messages, as a result of a system event such as an alarm or trouble condition. Refer to the Rules section for detailed information. • Schedules feature: Allows...
Page 7 - Security Codes; Alarms; Disarming the System; Two-Way Voice Feature
– 7 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation Security Codes At the time of installation, you were asked to provide a personal 4-digit security or “Master User” code. You must enter the user code when arming and disarming the system, and when performing othe...
Page 8 - LYNX Touch SIA False Alarm Prevention Features; If you leave the premises and enter again before the; Burglary Abort Window:; Your security system has a delay between the time a burglary alarm
– 8 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation LYNX Touch SIA False Alarm Prevention Features Many false alarms are caused by simple accidents, like forgetting to close a door when you leave. The LYNX Touch SIA includes several features that help prevent fals...
Page 9 - SECURITY FUNCTIONS; Away” icon or “Away” key then enter code.; MESSAGE CENTER
– 9 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Quick View of System Functions SECURITY FUNCTIONS Check System status: ................................................. Select “System” icon. To arm in STAY mode: .............................................. Select “Arm Stay” i...
Page 10 - General
– 10 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Touch screen Control General **IMPORTANT** If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and C...
Page 11 - Index Item
– 11 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Touch screen Control Note: The system functions described below are for reference only and require additional key entries to activate. Index Item Description 1 Display Window Color Liquid Crystal Display (LCD) Touch scr...
Page 12 - Display Definitions; ICON TEXT; Armed Stay; OR
– 12 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Display and Indicators Display Definitions ICON TEXT DEFINITION Ready to Arm Displayed along with the the text “ Ready To Arm ” when system is Disarmed and ready to arm. Armed Away “ Armed Away ” is displayed along the ...
Page 14 - LCD Display; installed in or connected to your system.; Dashboard Screen; Ready To Arm
– 14 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Navigating Menus LCD Display LYNX Touch’s Liquid Crystal Display (LCD) touch screen displays variable icons and text on “screens”. The screen displays status icons and associated text, the current time, system status information ...
Page 15 - Navigation Keys; ” Key will return you to the previous; Function Keys; LYNX Touch Security Home Screen (page 1)
– 15 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Navigating Menus Navigation Keys Navigating through the screens is accomplished by lightly touching the menu item on the touch screen. Once activated, the control will take you to the next screen. Selecting the “Home” (cancel) ke...
Page 16 - Menu Screens; Unrestricted Menu
– 16 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Navigating Menus Menu Screens System Status is displayed at the top of each screen. The time and date are displayed at the bottom of the Home Screen. Menus Unrestricted Menu The first page of the Home Screen provides access to an...
Page 17 - Master Menu
– 17 – SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Navigating Menus Master Menu The User Menu provides access to User configurable features and displays eight options. Entering the Master User Code is required to access the Master menu. • Users – Allows Master User to add or remo...
Page 18 - BYPASSING PROTECTION; the; System Can Be Armed
– 18 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES System Status General Information Before arming your system, all protected doors, windows, and other protection zones must be closed or bypassed (see the BYPASSING PROTECTION section). Ready LED: The Green...
Page 19 - Arming in Stay Mode; E n t e r C o d e :; “Armed Stay Exit Now”; If a valid user code is not entered or the
– 19 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Arming in Stay Mode Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. The green Re...
Page 20 - “Armed Stay”; Auto Stay Feature
– 20 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Armed Stay 5000-100-056-V1 Phone More Automation Message Zones Disarm 72 10:18 AM June 8, 2010 3. At the end of the exit delay the system announces “Armed Stay” and displays the “ Armed S...
Page 21 - Arming In Away Mode; Enter a valid User Code.
– 21 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Arming In Away Mode Use this mode when no one will be staying on the premises. Close all protected perimeter windows and doors before arming. The green Ready indicator on the control shou...
Page 22 - Exit Warning
– 22 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Armed Away 5000-100-057-V1 Phone More Automation Message Zones Disarm 72 10:18 AM June 8, 2010 3. If “ Exit Warning ” has been enabled, the system will continue to beep throughout the exi...
Page 23 - Arming the System with no delay (Instant); Armed Stay Instant –exit now; The entry delay time is eliminated when; Quick Exit
– 23 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Arming the System Arming the System with no delay (Instant) Use “Instant” with Stay mode when you are staying home and do not expect anyone to use the entrance door. Use “Instant” with Away mode when the p...
Page 24 - Exit Delay; Restarting Exit Delay While System Armed; Armed Stay - Exit Now; Exit Alarms
– 24 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Entry/Exit Delays Entry/Exit Delays Entry/Exit Delays Entry/Exit Delays Exit Delay Exit delay begins immediately after arming the system, and gives you time to leave through the designated exit door withou...
Page 25 - Entry Delay; Arming the System
– 25 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Entry/Exit Delays Entry/Exit Delays Entry/Exit Delays Entry/Exit Delays system/zone status area. The alarm will continue to sound until the system is disarmed or timeout ocurs. To stop the alarm, the syste...
Page 26 - Disarming the System and Silencing Alarms; “Disarmed Ready to
– 26 – SECURING THE PREMIS SECURING THE PREMIS SECURING THE PREMIS SECURING THE PREMIS ES ES ES ES Disarming the System Select the “Disarm” icon or the “Off” key to disarm the system and to silence alarm and trouble sounds. See the Summary of Audible Notification section for information, which will ...
Page 27 - Disarming the System During Entry Delay; ARMED; disarm system; When an Alarm Occurs; The zone that caused the alarm is
– 27 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Disarming the System Disarming the System During Entry Delay Armed Stay - Disarm Now E n t e r C o d e : C a n c e l D i s a r m N o w 2 3 1 5 6 4 0 8 9 7 C l e a r 5000-100-201-V0 ARMED READY Upon enterin...
Page 28 - Bypassing Individual Zones; All bypasses are removed when an Off sequence; Bypass All; Arming the
– 28 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Bypassing Protection Zones Bypassing Individual Zones The Bypass feature can be used when you want to intentionally arm your system with one or more zones unprotected. Bypassed zones are unprotected and wi...
Page 29 - Displaying/Clearing Bypassed Zones; Ready To Arm - Bypass
– 29 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Bypassing Protection Zones Displaying/Clearing Bypassed Zones Ready To Arm - Bypass 5000-100-210-V0 Arm Away Delay Phone More Automation Message Zones Arm Stay 72 10:18 AM June 8, 2010 Ready To Arm - Bypas...
Page 30 - Panic Keys; Key Function
– 30 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Panic Keys Panic Keys Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer for the func...
Page 31 - Activating a Panic Alarm; Fire Alarm
– 31 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Panic Keys Activating a Panic Alarm Ready To Arm 5000-100-006-V1 Arm Away Delay Phone More Automation Message Zones Arm Stay 72 10:18 AM June 8, 2010 1. With the system in the disarmed or armed state, depr...
Page 32 - Chime Mode; Turning Chime Mode On or Off
– 32 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Chime Mode Chime Mode Your system can be set to provide you with an audible alert of the opening of a door, while it is disarmed, by using Chime mode. When activated, three beeps will sound at the control ...
Page 33 - Voice Mode; Turning Voice Mode On or Off
– 33 – SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES Voice Mode Voice Mode Your system can be set to provide you with a voice alert of system functions by activating the Voice mode. When activated, the system will announce the system status when armed/disarm...
Page 34 - This code can be used to arm the system, but cannot disarm the; unless; With the system in the disarmed state,
– 34 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS User Access General Information For additional security you (the Master User Code) can assign secondary user codes to individual users enabling them to perform specific system functions. These secondary users are identified by "U...
Page 35 - The Z-wave Lock Control option is only
– 35 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS User Access Ready To Arm Program the system E n t e r C o d e : C a n c e l 5000-100-009-V0 2 3 1 5 6 4 0 8 9 7 C l e a r 2. Enter your 4-digit Master User Code. The system displays the Master User programming screen. WiFi Config Dat...
Page 36 - Thomas; Yes; Disarm
– 36 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS User Access Ready To Arm 5000-100-081-V0 A Q User3 Z S W L O P M K I N J U V G T B H Y C F R X D E C l e a r D o n e 123!@# a b c . . . 6. If desired you can enter a User Name. Select the “ Clear ” key and then enter up to 10 charact...
Page 37 - Editing/Deleting a User
– 37 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS User Access Editing/Deleting a User Arm Away Ready To Arm Dashboard Arm Stay Back Delay Settings 10:18 AM June 8, 2010 5100-100-003-V0 Tools 1. With the system in the disarmed state, select the “ Tools ” icon from the second page of ...
Page 39 - Viewing System Events; C a n c e l
– 39 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS View Events This feature can be used to view a number of System Events including Arming/Disarming, Zone Activity, Troubles and Alarms. Viewing System Events Arm Away Ready To Arm Dashboard Arm Stay Back Delay Settings 10:18 AM June 8...
Page 41 - Entering Message Mode
– 41 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Message Recording and Playback The LYNX Touch Message Center allows you to record, play and delete messages. The maximum message duration is 184 seconds. NOTES: (1) If the system loses electrical power, all messages will be erased. (...
Page 42 - Add New; Deleting Messages
– 42 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Message Recording and Playback 5000-100-046-V0 Message 1 2:48 PM September 1, 2010 Message 2 5:09 PM September 5, 2010 Add New Delete All Play Ready To Arm 6. When you have finished recording, select “ 2 ” . The system displays the r...
Page 43 - turn on or off the Chime or turn off the telephone Ringer.; Change System Settings
– 43 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS System Settings The volume level of message playback, system announcements, and status beeps can be changed if desired. Additionally, you can adjust the display’s brightness and contrast and turn on or off the Chime or turn off the t...
Page 44 - Setting the Date and Time; Date Time
– 44 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Clock/Calendar Note: If your system is equipped with a GSMVLP5 or ILP5 Communication Module, the time and date will be programmed and updated automatically via Central Station. You may still program the correct Time Zone as shown bel...
Page 45 - C l e a r
– 45 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Clock/Calendar System Programming... 5000-100-016-V0 T H U S U N W E D 3 2 S A T 6 F R I 5 T U E M O N 1 1 8 1 7 2 0 1 9 1 6 1 4 1 5 2 5 2 4 2 7 2 6 2 3 2 1 2 2 3 0 2 8 2 9 1 1 1 0 1 3 1 2 9 7 8 June 2010 4 S a v e 4. Select the corr...
Page 47 - The following options are programmed in this section:; Programming Rules; With the system in the disarmed state,
– 47 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation General Information Automation is used to program triggers, home automation features, send Follow-Me or E-mail messages of system events or program home automation features (Z-Wave) including Rules and Scenes (if Z-Wave co...
Page 48 - Select the
– 48 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation 5100-100-007-V0 Rules Switches Schedules Scenes Locks Tools Thermostat 68 Ready To Arm 2. Select the “ Rules ” button. The system displays the Rules screen. Ready To Arm 5100-100-070-V0 Rules 1 New Edit Delete Rules 3 New ...
Page 50 - Not Used
– 50 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Ready To Arm 5000-100-189-V0 Name Save Type Trigger Output 01 Start Zone Type Not Used Start System Operation Not Used Action None Stop Zone Type Not Used Stop System Operation Not Used OR Ready To Arm 5100-100-071-V0 Name...
Page 51 - Editing or Deleting Rules; Rules 21-40 are only accessible through
– 51 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Ready To Arm 5000-100-192-V0 Save Third Start Zone Disabled First Start Zone Disabled Second Start Zone Disabled Zone Number Operation Fault Third Stop Zone Disabled First Stop Zone Disabled Second Stop Zone Disabled OR Re...
Page 52 - Schedules; Programming a Scheduled Function
– 52 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Schedules The Schedules Feature can be used to program the system to automatically perform certain functions (i.e.; automatically arming the system in Stay mode and activating output [Z-Wave] devices). Programming a Schedu...
Page 54 - D o n e; Editing a Scheduled Function; Deleting a Scheduled Function
– 54 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Ready To Arm 2 3 1 5 6 4 0 8 9 7 C l e a r 5000-100-147-V0 AM / PM Enter Time 10:21 AM D o n e 9. If Auto Stay is selected, select “ Clear ” then enter a 4-digit time on the displayed keypad then select “ Save ” . If “ Rul...
Page 55 - Scenes; Programming a Scene
– 55 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Scenes Scenes are used to control a single or group of devices together, turning them OFF, ON, ON to a preset lighting level, temperature or mode, or lock/unlocked. The LYNX Touch has 20 Scenes which may each be configured...
Page 56 - Thermostats; If Schedules/Scenes feature will be used to; Locks; For compatibility, do not include a door lock as
– 56 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation 5100-100-083-V0 Switches Locks Thermostat 68 Ready To Arm 4. Select the “ Add New Device ” button. The system displays the available Z-Wave device types. Select one of the following options: Switches Thermostats Locks 5. S...
Page 57 - Editing/Deleting a Scene
– 57 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Editing/Deleting a Scene Zones Arm Away Ready To Arm Arm Stay More Delay Phone 10:18 AM June 8, 2010 5100-100-004-V0 72 Message Automation 1. With the system in the disarmed state, select the “ Automation ” icon from the H...
Page 58 - Running a Scene
– 58 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Automation Running a Scene Zones Arm Away Ready To Arm Arm Stay More Delay Phone 10:18 AM June 8, 2010 5100-100-004-V0 72 Message Automation 1. With the system in the disarmed state, select the “ Automation ” icon from the Home Scree...
Page 59 - Programming a Reminder
– 59 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Reminders The Reminder Feature can be used to program/record reminders that can be displayed on the touch screen, announced by the control and/or sent to one or two pre-programmed phone number(s). Check with your installer to see if ...
Page 61 - Once; Walk Dog; Editing a Reminder; Deleting a Reminder
– 61 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Reminders Ready To Arm S a v e 5000-100-183-V0 Start Time 3:00 PM Date January 1, 2011 Frequency Once Name Walk Dog Voice No Follow Me Disabled Acknowledge No 10. If a “ Follow Me ” phone number(s) was programmed by your installer yo...
Page 62 - View/Join Available WiFi Networks
– 62 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS WiFi Configuration View/Join Available WiFi Networks WiFi Config Date Time Ready To Arm Events Back Reminders Keypad Users 5100-100-006-V0 Slide Show Test 1. At the Master User screen select the WiFi Config icon. The system displays ...
Page 63 - Manually Configure Access Point; When configuring for WEP encryption key on the
– 63 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS WiFi Configuration Manually Configure Access Point WiFi Config Date Time Ready To Arm Events Back Reminders Keypad Users 5100-100-006-V0 Slide Show Test 1. At the Master User screen select the WiFi Config icon. The system displays th...
Page 64 - Enrolling/Syncing Auxiliary Keypads; At the Master User screen select the Keypad; keypad to be deleted.; Defaulting the system will not automatically
– 64 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS WiFi Configuration Enrolling/Syncing Auxiliary Keypads The LYNX Touch will support up to four Mobile Internet Devices (MID) (or tablets) that can be used as auxiliary keypads. A WiFi communication device is required. The “Keypad” but...
Page 65 - Using the Speaker Phone Feature
– 65 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Speaker Phone Feature If this feature has been programmed the LYNX Touch is capable of operating as a speaker phone. During speaker phone operation the system will provide the following functions: • All function/event processing will...
Page 66 - Placing a Call; Answering a Call
– 66 – US US US US ER FUNCTIONS ER FUNCTIONS ER FUNCTIONS ER FUNCTIONS Speaker Phone Feature Placing a Call Ready To Arm 5000-100-006-V1 Arm Away Delay Phone More Automation Message Zones Arm Stay 72 10:18 AM June 8, 2010 1. With the system in the disarmed or armed state, select the “ Phone ” icon f...
Page 67 - Summary of Audible; Using Remote Phone Control Feature; Remote Phone Control Commands; Enter; Notes
– 67 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Remote Phone Control Feature The LYNX Touch Series is equipped with a remote interactive phone capability that permits access to the security system from any off-site touch-tone telephone using all user codes. The system will provide...
Page 69 - Activating the Slide Show
– 69 – USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS Slide Show The LYNX Touch features a Slide Show/Screen Saver feature. The feature allows images to be displayed on the touch screen when it is not in use. Connection to Total Connect Service is required in order for your installer to...
Page 71 - Should you become aware of a fire emergency; In Case of Carbon Monoxide Alarm; Silence the alarm by entering an OFF sequence.
– 71 – FIRE FIRE FIRE FIRE/CO /CO /CO /CO ALARM SYSTEM ALARM SYSTEM ALARM SYSTEM ALARM SYSTEM (If Installed) General Information UL UL UL UL LYNX Touch is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-SHA) is installed. General Your fire alarm sys...
Page 73 - Position your detector or your interior and/or exterior; FRONT; FLOOR
– 73 – FIRE FIRE FIRE FIRE/CO /CO /CO /CO ALARM SYSTEM ALARM SYSTEM ALARM SYSTEM ALARM SYSTEM Emergency Evacuation UL UL UL UL LYNX Touch is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-SHA) is installed. Establish and regularly practice a plan o...
Page 74 - Testing or Rebooting the System
– 74 – SYSTEM FUNCTIONS Testing the System (to be conducted weekly) Test Modes The Test icon provides access to the Walk Test, Dialer Test and Reboot functions. The Walk Test mode allows each protection point to be checked for proper operation. When the Walk Test mode is active, the control sounds a...
Page 75 - Walk Test
– 75 – SYSTEM FUNCTIONS Testing the System (to be conducted weekly) WiFi Config Date Time Ready To Arm Events Back Reminders Keypad Users 5100-100-006-V0 Slide Show Test 3. Select the “ Test ” icon. The system displays the Test screen. Ready To Arm Back 5100-100-087-V0 Prod. Id. : DE Sw. Rev.: 05.00...
Page 76 - Exiting Test Mode; Test mode will remain active until exited via an Off sequence.; LYNX Touch SIA Exit/Entry Delay Times
– 76 – SYSTEM FUNCTIONS Testing the System (to be conducted weekly) If a problem is experienced with any protection point (no confirming sounds, no display), notify your service company. When all protection points have been checked and are intact (closed), there should be no zone identification numb...
Page 77 - TESTING THE SYSTEM; Routine Care; Do not
– 77 – SYSTEM FUNCTIONS Maintaining your system The components of your security system are designed to be as maintenance-free as possible. To make sure that your system is in working condition, do the following: 1. Test your system weekly (see the TESTING THE SYSTEM section ). 2. Test your system af...
Page 78 - Low Battery Conditions in Wireless Sensors; To silence Low Battery Warning Tones, enter an Off sequence; Changing the LYNX Touch Series System Battery; years and must be replaced by a qualified service technician.
– 78 – SYSTEM FUNCTIONS Maintaining your system Low Battery Conditions in Wireless Sensors Each wireless sensor in your system has an internal battery. The system detects low battery conditions in wireless sensors, including smoke detectors, personal emergency transmitter, and the portable wireless ...
Page 79 - SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS; SOUND; Additional Announcements:
– 79 – SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS SOUND CAUSE ANNOUNCEMENT* INTERRUPTED FIRE ALARM (3 beeps) OR CARBON MONOXIDE ALARM (4 beeps) fire alarm + zone voice descriptor OR Carbon monoxide alarm + zone voice descriptor (Voice descriptor is interlaced with the sounder and sounds every 45 ...
Page 80 - System Displays; DISPLAY DEFINITION
– 80 – SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS System Displays The following icons will be displayed on the Home screen along with specific zone status information (if applicable) to indicate system status. DISPLAY DEFINITION DISPLAY DEFINITION AC Loss Door Open Alarm (intrusion) Window Open A...
Page 81 - Zone Status Icons; The following icons may be displayed on the Zone Status screen.; ICON; Alarm; LED Meanings; OFF = System disarmed
– 81 – SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS Zone Status Icons The following icons may be displayed on the Zone Status screen. ICON DEFINITION ICON DEFINITION Alarm Trouble (red) Fault (Yellow) Bypass Ready LED Meanings Armed LED (Red): ON = System armed OFF = System disarmed Blinking = Syst...
Page 82 - REGULATORY AGENCY STATEMENTS; Federal Communications Commission (FCC) Part 15; CLASS B DIGITAL DEVICE STATEMENT
– 82 – REGULATORY AGENCY STATEMENTS Federal Communications Commission (FCC) Part 15 The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to oper...
Page 83 - TELEPHONE/MODEM INTERFACE; Federal Communications Commission (FCC) Part 68; NOTICE; RF Exposure
– 83 – REGULATORY AGENCY STATEMENTS TELEPHONE/MODEM INTERFACE Federal Communications Commission (FCC) Part 68 This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains the FCC registration number and Ringer Equivalence Number (REN). You must...
Page 84 - IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS; has been disconnected from the phone
– 84 – IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS In the event of telephone operational problems, disconnect the control by removing the plug from the RJ31X (CA38A in Canada) telephone wall jack. We recommend that your certified installer demonstrate disconnecting the phones on installation of t...
Page 85 - OWNER'S INSURANCE PREMIUM CREDIT REQUEST
– 85 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeowner's insurance carrier for possible premium credit. A. GENERAL INFORMATION: Insured's Name and Address: Insurance Company: Policy No.: LYNX Touch Series ________________________________________...
Page 86 - E. SMOKE DETECTOR LOCATIONS
– 86 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS Furnace Room Kitchen Bedrooms Attic Basement Living Room Dining Room Hall F. BURGLARY DETECTING DEVICE LOCATIONS: Front Door Basement Door Rear Door All Exterior Doors 1st Floor Windows All Windows Interior Locations...
Page 87 - SERVICING INFORMATION; Your local Honeywell dealer is:
– 87 – SERVICING INFORMATION Your local Honeywell dealer is the person best qualified to service your alarm system. Arranging some kind of regular service program with him is advisable. Your local Honeywell dealer is: Name: Address: Phone:
Page 88 - THE LIMITATIONS OF THIS ALARM SYSTEM
– 88 – WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a va...
Page 89 - – NOTES –
Page 93 - – INDEX –
– 93 – – INDEX – A Alarm Cancelled .................................... 8, 24, 25 Alarm Exit Error .............................................24 Alarms................................................................7 Armed Indicator ..............................................23 Armed LED Indica...
Page 95 - TWO YEAR LIMITED WARRANTY; is improperly installed, applied or maintained; EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY
– 95 – TWO YEAR LIMITED WARRANTY Honeywell International Inc., acting through its Security & Communications business (“Seller”), 2 Corporate Center Drive, Melville, New York 11747 warrants its products to be free from defects in materials and workmanship under normal use and service, normal wear...
Page 96 - Corporate Center Drive, Suite 100
2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2012 Honeywell International Inc. www.honeywell.com/security Ê800-10615ÄŠ 800-10615 1/12 Rev. A
Honeywell DT8050A
Installation Manual
Honeywell DT8050
Manual
Honeywell TPFIT25WK
User Manual
Honeywell TPFIT32AWK
User Manual
Honeywell 24DX47
User Manual
Honeywell TPFIT50PWK
User Manual
Honeywell TPFIT50WK
User Manual
Honeywell 00010
User Manual
Honeywell ADVBLEWIFI
Manual