Honeywell Home Security System Galaxy 2- Manuals

2 Controlling Your Alarm System Users Each person who uses the system is described as a ‘User’ and can have their own uniqueidentity, in the form of a PIN code, prox tag or wireless keyfob, or a combination of all three.Different users can have a different level of access to the alarm system functio...

3 Keypads There are two types of keypad available as shown below but both work in a similar manner.The number buttons are for entering PIN codes and for changes options. The function keysdown the side have the following use: A>: This scrolls forward in a list or menu and activates a FULL set. B&l...

4 Wireless Keyfobs Keyfobs are portable controllers that can be attached to a key ring. They will allow you to Setand Unset the system by a single press of a button and can sometimes be programmed withadditional functions. Because they operate by radio, they can be used anywhere around thepremises p...

5 Setting the System — Part or Night Set Part and Night setting are similar to Full setting but leave off certain detectors as agreed withyour installer. Additionally, the system can be programmed by the installer not to give any exittimer tones during the setting period (silent set).To Part or Nigh...

8 Setting and Unsetting Groups It is possible to split the alarm system into separate areas or ‘Groups’ that can be set and unsetindependently. Different users can be given access to only certain groups, or to all groups.Also, individual users can be given the option of simply setting and unsetting ...

9 Users can then navigate around the menu using the scroll keys, ent key and esc key, or theycan jump to any specific menu item directly by typing the number of the item. An overview ofall the accessible functions is shown below. Not all users will be able to access all of thefunctions. This will de...

11 Menu 22 - View Log This option displays the system event log. The log records all events that occur in the systemand is vital for tracing the chain of events during a break-in or when trying to trace a fault. Onentering the option, the most recent event is displayed on screen in the following for...

12 Menu 31 - Walk Test This menu allows the zones to be manually tested. There are two sub-options to this functionas follows: 1 = Test all Zones This puts all omittable zones into walk test immediately. 2 = Test Selected Zones This allows the user to select specific zones to be put into test. On se...

14 7 = Duress The duress function, when enabled, forces a panic signal to be sent to the monitoring stationeach time the user PIN, fob or tag is used. Duress codes should only be used in emergencysituations when there is a threat to life. Menu 44 - Mobile Numbers This option allows the SMS text mess...