Honeywell HD-DVR-1008- Manuals

Honeywell iv Manual Record ........................................................................................................... 89 Account ...................................................................................................................... 89 Auto Maintain .....................

Honeywell i Explanation of Symbols This symbol is intended to alert the user to the presence of insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presenc...

Honeywell ii Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection. Caution Users of the product are responsible for checking and complying with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio si...

Honeywell iv 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled o...

Honeywell 1 1 Features and Specifications Overview HD-DVR-1004, HD-DVR-1008 and HD-DVR-1016 are excellent digital video surveillance products. They adopt embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality,...

Features and Specifications 2 Supports multi-channel audio and video. Independent hardware codecs encodes and decodes the audio and video signal from each channel to maintain video and audio synchronization. • Backup function Provides local backup via USB port for flash disks and portable HDDs IE we...

Honeywell 3 Specification Parameter HD-DVR-1004 HD-DVR-1008 HD-DVR-1016 System Main Processor High-performance industrial embedded micro controller OS Embedded LINUX System Resources Multiplex operations: simultaneous multi-channel recording, multi-channel playback and network operation Interface Us...

Honeywell 7 2 Overview and Controls This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first. Front Panel The front panel is shown in Figure 2-1 . Figure 2-1 The Front Panel of HD-DVR-1004/ HD-DVR-1008/ H...

Overview and Controls 8 ESC ESC Go to previous menu, or cancel current operation. During playback, click it to restore real-time monitor mode. Enter ENTER Confirm current operation Go to default button Go to menu Shift Shift In textbox, click this button to switch between numeral, English (Small/Cap...

Honeywell 9 USB port To connect USB storage device, USB mouse. Network abnormal indicator Net Network error occurs or there is no network connection, the light becomes red to alert you. HDD abnormal indicator HDD HDD error occurs or HDD capacity is below specified threshold value, the light becomes ...

Overview and Controls 10 Please refer to the following table for detailed information. No. Description 1 Video input 2 Audio input 3 Video CVBS output 4 Audio output 5 Network port 6 USB port 7 HDMI port 8 RS232 port 9 Video VGA output 10 Alarm input/alarm output/RS485 port 11 12VDC Power input port...

Honeywell 11 Figure 2-5 Device Connection Remote Controller The remote controller interface is shown as in Figure 2-6 .

Overview and Controls 12 Figure 2-6 Remote Controller No. Function 1 Record search 2 Multiple-window switch 3 0-9 number keys 4 ESC, Cancel 5 Reserved, not effective for HD-DVR-1004, HD-DVR-1008 and HD-DVR-1016 6 Confirm /menu key 7 Direction keys 8 Auxiliary function key 9 Remote address switch 10 ...

Honeywell 13 Mouse Control Left click mouse The password input dialogue box will pop up if you have not logged in. In real-time monitor mode, you can go to the main menu. When you have selected one menu item, left click the mouse to view menu content. Implement the control operation. Modify checkbox...

Installation and Connections 16 3 Installation and Connections Note All the installation and operations here should conform to your local electrical safety rules Unpack Everything Be sure to use all the accessories recommended by the manufacturer. Before installation, please open the package and che...

Honeywell 17 HDD Installation This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher. You can refer to the user guide for a recommended HDD brand. Please follow the instructions below to install the hard disk. 1. Loosen the screws of the upper cover. 2. Remove upper cover 3. Rota...

Installation and Connections 18 7. Connect the HDD cable and power cable. 8. Close the upper cover and turn in the screws. After completing HDD installation, please check the connection of the data ribbon and power cord. Connecting Power Supply Please check whether the input voltage and device power...

Honeywell 19 Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance. If the distance is too long, you should use twisted pair cable, and you can add video compensation devices or use optical fiber to ensure video quality. You should keep ...

Installation and Connections 20 Audio Output The audio output signal parameter is usually over 200mv 1KΩ ( BNC). It can directly connect to low impedance earphones, active sound box or amplifier-drive audio output device. If the sound box and the pick-up cannot be separated spatially, it is easy to ...

Honeywell 21 Alarm Input and Output Details You can refer to the following sheet and Figure 3-1 for alarm input and output information. Figure 3-1 Alarm Input and Output of HD-DVR-1004, HD-DVR-1008 (Left) and HD-DVR-1016 (Right) Parameter Grounding Alarm Ground line Alarm Input HD-DVR-1004: 1, 2, 3,...

Installation and Connections 22 Use the same ground with that of DVR if you use external power for the alarm device. Note Only indoor devices are recommended for being connected to HD-DVR-1004 / HD-DVR-1008 /HD-DVR-1016 alarm inputs. Figure 3-2 Sample of Alarm Input (Normal Close Type) Alarm Output ...

Honeywell 23 Between touches with different polarity 1000VAC 1minute Between touch and winding 1000VAC 1minute Surge voltage Between touches with same polarity 1500V (10×160us) Length of open time 3ms max Length of closed time 3ms max Longevity Mechanical 50×106 times (3Hz) Electrical 200×103 times ...

Installation and Connections 24 d “485 A, B” of DVR cannot connect parallel with “485 port” of other device. e. The voltage between of A, B lines of the decoder should be less than 5v. 2. Connect the other end of the cable to the proper pins in the connector on the camera. 3. Please follow the instr...

Honeywell 25 4 Overview of Navigation and Controls Before operation, please make sure you have properly installed HDD and all the cable connections. Note From this chapter, most descriptions and figures are based on HD-DVR-1016 operation. Login, Logout & Main Menu Login After the system has boot...

Overview of Navigation and Controls 26 Within 30 minutes, login failure three times will result in a system alarm buzz and login failure five times will result in account lock. Figure 4-1 Menu Login Main Menu After you have logged in, the system main menu will appear as shown below. See Figure 4-2 ....

Honeywell 27 Logout There are two ways for you to log out. One is from menu option: In the main menu, click the shut down button, and you can see an interface as shown below. See Figure 4-3 . Figure 4-3 Logout Menu You have several options. See Figure 4-4 . Figure 4-4 Options for Logout The other wa...

Overview of Navigation and Controls 28 Manual Record Live Viewing After you have logged in, the system is in live viewing mode. You can see the system date, time and channel name. If you want to change the system date and time, you can refer to general settings ( Main Menu  Setting  General ). If ...

Honeywell 29 • Manual: The highest priority. After being set to manual mode, all selected channels will start regular (continuous) recording. • Automatic: Channel recording follows recording schedule setting ( Main Menu  Setting  Schedule ) • Closed: the channel stops recording. Figure 4-5 Recordi...

Overview of Navigation and Controls 30 When system is in automatic recording, all channels will be recorded as you set up in Main menu  Setting  Schedule . The corresponding indication light on the front panel will turn on. Figure 4-7 Automatic Recording in All Channels • Manual recording in all c...

Honeywell 31 Figure 4-9 Stop Recording in All Channels Search & Playback Search Menu Click the search button in the main menu, search interface is shown below. See Figure 4-10 . Usually there are three file types: • R: Regular recording file. • A: External alarm recording file. • M: Motion detec...

Overview of Navigation and Controls 32 Figure 4-10 Record Search Menu Please refer to the following chart for more information. Serial Number Function 1 Play 2 Backward 3 Stop 4 Slow play 5 Fast play 6 Previous frame 7 Next frame 8 Volume 9 Previous file 10 Next channel 11 Next file 12 Previous chan...

Honeywell 33 13 Search 14 Backup Basic Operation Playback There are various search modes: video type, channel number or time. The system can display a max of128 files in one screen. You can use the page up/down button to view if there are more than one page. By selecting the file name and double cli...

Overview of Navigation and Controls 34 modes such as fast play 1, fast play 2 and more. different versions. Slow play button ► In playback mode, click this button to switch between various slow play modes such as slow play 1 or slow play 2. Play/Pause ► /  In normal/fast/slow playback mode, click t...

Honeywell 35 Figure 4-11 Sample of the Calendar Schedule After the system has booted up it will enter a default 24-hour regular mode. You can set the record type and time in schedule interface. Schedule Menu In the main menu, from Setting to Schedule, you can go to the schedule menu. See Figure 4-12...

Overview of Navigation and Controls 36 MD: In the selected time, the device will record when MD happens, like motion diction, video loss, video mask. Alarm: In the selected time, the device will record when there is alarm input. MD & Alarm: In the selected time, the device will record when MD ha...

Honeywell 37 the entire setup and then click the Save button to keep all of the modified settings. Redundancy Redundancy function allows you to save record file in several hard disks. When a record is damage in one disk, there is a spare one in the other disk, so that data reliability and safety is ...

Overview of Navigation and Controls 38 Please refer to the following figure for detailed information. Figure 4-13 Schedule Snapshot Setting

Honeywell 39 Activation Snapshot Please follow the steps listed below to enable the activation snapshot function. After you enabled this function, system can snapshot when the corresponding alarm occurred. • In Encode interface, click snapshot button to input snapshot mode, size, quality and frequen...

Overview of Navigation and Controls 40 Priority Please note the activation snapshot has the higher priority than schedule snapshot. If you have enabled these two types at the same

Honeywell 41 time, system can activate the activation snapshot when alarm occurs, and otherwise system just operates the schedule snapshot. Image FTP In Network interface, you can set FTP server information. Please enable FTP function and then click save button. Please boot up corresponding FTP serv...

Overview of Navigation and Controls 42 • Delay: When detected motion is completed, the system will continue alarm output and recording for a specified time respectively. The value ranges from 10-300(Unit: second). • Region: Click Select , the interface is shown as in Figure 4-16 . Here you can set t...

Honeywell 43 Figure 4-15 Motion Detection Menu Figure 4-16 Motion Detection Zone Setting

Overview of Navigation and Controls 44 Figure 4-17 PTZ Activation Setting Figure 4-18 Armed Period Setting

Honeywell 45 Figure 4-19 Business Day and Non-Business Day Setting Video Loss In Figure 4-15 , select “Video Loss” from the type list. You can see the interface is shown in Figure 4-20 . This function allows you to be informed when video loss has occurred. You can enable the alarm output channel and...

Overview of Navigation and Controls 46 Figure 4-20 Menu of Video Loss Camera Masking When someone viciously masks the camera lens, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 4-21 . Tips: You can enable preset/tour/pattern activation operati...

Honeywell 47 Figure 4-21 Menu of Camera Masking Alarm Setup and Alarm Activation Before operation, make sure you have properly connected alarm devices such as the buzzer. Go to alarm setup interface On the main menu, from Setting to Alarm, you can see the alarm setup interface. See Figure 4-22 . Ala...

Overview of Navigation and Controls 48 • PTZ activation: Here you can set PTZ movement when the alarm occurs. For example, go to preset, tour& pattern when there is an alarm. Click Select , and you can see an interface as shown in Figure 4-26 . • Period: Click Set , and you can see an interface ...

Honeywell 49 Figure 4-22 Menu of the Alarm Figure 4-23 The settings of PTZ Activation

Overview of Navigation and Controls 50 Figure 4-24 Period Setup Figure 4-25 The Settings of Business Days and Non-Business Days Backup DVR supports various backup devices such as CD-RW, DVD driver, USB backup and network download. The records can be played with PC by the Record Player contained in t...

Honeywell 51 Detect Device Click Backup , and you can see an interface shown in Figure 4-26 . Here you can view device information. You can view the backup device name and its total space and free space. The device includes a USB burner, flash disk, SD card and portable HDD. Note The USB Flash Disk ...

Overview of Navigation and Controls 52 When the system completes backup, you can see a dialogue box prompting successful backup. Figure 4-27 Backup Menu with Search Results Click Start , and the system will begin the burning process. At the same time, the Start button will change to the Stop button....

Honeywell 53 The file name format usually is: SN_CH+channel number+time Y+M+D+H+M+S. In the file name, the YDM format is the same as what you set in general interface ( Main Menu  Setting  General ). The file extension name is “.dav”. You can visit our website to view listed CD-ROM brands. Tips: D...

Honeywell 55 Figure 4-29 PTZ Setup Menu After completing all the settings click Save . In the single window display (View 1) mode, right-click to open the interface shown in Figure 4-30 (by clicking Fn in the front panel or in the remote controller will cause a menu to appear with only Pan/Tilt/Zoom...

Overview of Navigation and Controls 56 • 8 direction arrows for PTZ position adjustment • Zoom • Focus • Iris Click the buttons and to adjust zoom, focus and iris. Note Some functions are not supported by some PTZ speed dome. For example, Zoom, Focus, Iris and Pattern are not supported by HSPT-120. ...

Honeywell 57 Preset/Tour/Pattern/Scan Operations In Figure 4-31 , click Set . The interface is shown as below. See Figure 4-32 . Here you can set the following items: • Preset • Tour • Pattern • Border Figure 4-32 PTZ Setup Menu In Figure 4-31 , click Page Switch . The interface is shown in Figure 4...

Overview of Navigation and Controls 58 Figure 4-33 Function Menu Note • Preset, tour and pattern all need the value to be the control parameter. You can define it as you require. • You need to refer to your speed dome user’s manual for the auxiliary function definition. In some cases, it can be used...

Honeywell 59 Figure 4-34 Preset Setup Activate Preset In Figure 4-33 , input the preset number in the “No.” field, and click Preset . Patrol setup (Tour Setup) In Figure 4-32 , click Patrol . The interface is shown in Figure 4-35 . Input the preset number and add this preset to a patrol (tour). For ...

Overview of Navigation and Controls 60 Activate Patrol (tour) In Figure 4-32 , input the patrol (tour) number in the No. blank and click the patrol button. Pattern Setup In Figure 4-32 , click Pattern and then click “ begin . The interface is shown as in Figure 4-36 . Then you can go to Figure 4-31 ...

Honeywell 61 Figure 4-37 Auto Scan Setup Activate Auto Scan In Figure 4-33 , click Auto Scan , and the system will begin to auto scan. Correspondingly, the Auto Scan button will change to the Stop button. Click Stop to terminate the scan operation. Click Page Switch again, and the system will go bac...

Understanding of Menu Operations and Controls 62 5 Understanding of Menu Operations and Controls Menu Tree This series DVR menu tree is shown as below:

Understanding of Menu Operations and Controls 64 Main Menu After you have logged in, the system main menu will appear as shown below. See Figure 5-1 . There are a total of six buttons: Search , Info , Setting , Backup , Advanced , and Shutdown . Move the cursor to highlight the icon, and then double...

Understanding of Menu Operations and Controls 66 Figure 5-2 General Setup Menu Figure 5-3 DST Setup Menu (Week) Figure 5-4 DST setup menu (Date) Encode Encode setting includes the following items. See Figure 5-5 . Note that some series do not support extra stream.

Honeywell 67 • Channel: Select the channel you want. • Compression: System supports H.264. • Resolution: System supports various resolutions, D1(4CIF)/CIF/QCIF. You can select from the dropdown list. The extra stream of each channel supports only QCIF resolution. • Bit rate: System supports two type...

Understanding of Menu Operations and Controls 68 Figure 5-5 Encode Menu Figure 5-6 Overlay Menu Schedule Refer to Schedule RS232 RS232 interface is shown as follows. There are five items. See Figure 5-7 .

Honeywell 69 • Function: There are two modes for you to select. Console is for serial port or min-end platform to upgrade program. Adaptor is reserved for system integration or function enhancement. • Baud rate: You can select proper baud rate. • Data bit: You can select proper data bit. • Stop bit:...

Understanding of Menu Operations and Controls 70 • IP address: Here you can input the IP address. • DHCP: It is to activate auto search IP. When you enable the DHCP function, you cannot modify the IP/Subnet mask /Gateway. These values are from the DHCP function. If you have not enabled the DHCP func...

Honeywell 71 Advanced setup interface is shown in Figure 5-9 . Draw a circle to enable the corresponding function and then double-click the current item to go to the setup interface. Figure 5-9 Advanced Settings IP Filter IP filter interface is shown in Figure 5-10 . You can add IP in the following ...

Understanding of Menu Operations and Controls 72 · IP multiple cast group address -224.0.0.0-239.255.255.255 -“D” address space · The higher four-bit of the first byte=”1110” · Reserved local multiple cast group address -224.0.0.0-224.0.0.255 -TTL=1 When sending out telegraph -For example 224.0.0.1 ...

Honeywell 73 Click Save , you need to restart to activate your configuration. After rebooting, DVR will connect to the internet automatically. The IP in the PPPoE is the DVR dynamic value. You can access this IP to visit the unit. Figure 5-11 The PPPoE Setup Menu NTP Setup You need to install SNTP s...

Understanding of Menu Operations and Controls 74 Beijing (Hong Kong) GMT+8 Tokyo GMT+9 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Middle Atlantic...

Honeywell 75 http://(Domain Name) e.g.: http://site.3322.org) Now you can open the DDNS Server web search page. Figure 5-13 The DDNS Setup Menu Note that the NNDS type includes: CN99 DDNS 、 NO-IP DDNS 、 Private DDNS 、 Dyndns DDNS and sysdns DDNS. The private DDNS function is reserved for integration...

Understanding of Menu Operations and Controls 76 Figure 5-14 The FTP Server Setup Menu You can use a PC or FTP login tool to test setup. For example, you can login user ZHY to

Honeywell 77 Figure 5-16 The FTP Setup Menu Please check the box left to Enable to activate the FTP function. Here you can input the FTP server address, port and remote directory. When the remote directory is null, the system automatically creates folders according to the IP, time and channel. User ...

Understanding of Menu Operations and Controls 78 Figure 5-17 The Email Setup Menu Refer to the following table for detailed information. Parameter Function SMTP Server Input server address and then enable this function. Port Default value is 25. You can modify it if necessary. User Name The sender e...

Honeywell 79 • Under Windows Command Prompt, input ping smtp.google.com then press return. • The displayed IP address 74.125.45.25 is the SMTP server IP address. Figure 5-18 The Command Window Alarm Refer to Alarm Setup and Alarm Activation . Detect Refer to Detect . Pan/Tilt/Zoom The pan/tilt/zoom ...

Understanding of Menu Operations and Controls 80 After completing all the setups click Save , and the system will go back to the previous menu. For a detailed setup, refer to Preset/Tour/Pattern/Scan Operations . Figure 5-19 The PTZ Setup Menu Display Display setup interface is shown as below. See F...

Honeywell 81 • Interval: Input proper interval value here. The value ranges from 5-120 seconds. In tour process, you can use the mouse or click Shift to turn on the window switch function. Stands for opening switch function, stands for the closing switch function. • Motion tour and alarm tour type: ...

Understanding of Menu Operations and Controls 82 Figure 5-21 The Channel Name Setup Menu In tour mode, you can see the following interface. On the right corner, right-click the mouse or click Shift , and you can control the tour. There are two buttons: stands for enabling window switch and stands fo...

Honeywell 83 Default Click Default , a dialogue box will pop up. You restore default factory setup of the following functions by checking the boxes next to the items. See Figure 5-23 . • Select all • General • Encode • Schedule • RS232 • Network • Alarm • Detect • Pan/tilt/zoom • Display • Channel n...

Understanding of Menu Operations and Controls 84 Figure 5-23 The Default Setup Menu Advanced Select Advanced on the main window and the interface is shown as follows. See Figure 5-24 . There are seven function keys in total: HDD management, alarm output, abnormity, manual record, account, auto maint...

Honeywell 85 Figure 5-24 The Advanced Menu HDD Management Here you can view and implement hard disk management. See Figure 5-25 . You can see current HDD type, status, capacity and record time. By selecting items in the dropdown list and click Execute , you can switch HDD mode between read/write and...

Understanding of Menu Operations and Controls 86 Figure 5-25 The HDD Management Setup Menu Click Alarm Set , and the interface is shown as follows. See Figure 5-26 (this interface is just like the abnormity setup). Refer to Abnormity for detailed information. Please check boxes to select the corresp...

Honeywell 87 Figure 5-26 The Abnormity Setup Menu Abnormity Abnormity interface is shown in Figure 5-27 . • Event type: There are several options for you such as disk error, no disk and etc. • Alarm output: alarm activation output port (multiple choices). The 3-ch is controllable 12V output. • Delay...

Understanding of Menu Operations and Controls 88 Figure 5-27 The Sample of No Disk Abnormity Alarm Output Here you can set proper alarm output. Automatic : start the alarm output automatically according to the settings of Detection/Alarm/Abnormity. Manual : manually start the alarm output Closed : m...

Honeywell 89 Manual Record Refer to Manual Record . Account Here you can implement account management. See Figure 5-29 . to see how to: • Add new user • Modify user • Add group • Modify group • Modify password. For account management please note: • The system account adopts two-level management: gro...

Understanding of Menu Operations and Controls 90 Figure 5-29 The Account Management Menu Auto Maintain Here you can set auto-reboot time and auto-delete old files setup. See Figure 5-30 . You can select proper setup from the dropdown list. After all the setups please Save , and the system will retur...

Honeywell 91 TV Adjust Here you can adjust the TV output setup. See Figure 5-31 . Please drag slide bar to adjust each item. After all the setups please click OK , the system will return to the previous menu. Figure 5-31 The TV Adjust Menu Text Overlay The card overlay function is for financial area...

Understanding of Menu Operations and Controls 92 Overlay mode: There are two options: preview and encode. Preview means overlay the card number in the local monitor video. Encode means overlay the card number in the record file. Overlay Position: Here you can select the proper overlay position from ...

Honeywell 93 Figure 5-33 Text Overlay(Network Type) For the ATM/POS don’t include protocols, the interface is shown in Figure 5-34 . Source IP refers to host IP address that sends out information (usually it is the device host.) Destination IP refers to other systems that receive information. Usuall...

Understanding of Menu Operations and Controls 94 Figure 5-34 ATM/POS Click Data button you can see an interface is shown in Figure 5-35 . Here you can set offset value, length, title according to your communication protocol and data package. Figure 5-35 Data Format

Honeywell 95 Information Here you can view system information. There is a total of five items: HDD (hard disk information), BPS (data stream statistics), Log and version, and online user. See Figure 5-36 . Figure 5-36 The Info Menu HDD Information Here is a list of hard disk type, total space, free ...

Understanding of Menu Operations and Controls 96 Setting  General to adjust system time or go to Advanced  HDD Management to format the problematic HDD and then reboot the DVR. Figure 5-37The HDD Info Menu Tips: Click Fn or left click the mouse button to view the HDD record time and HDD type and t...

Honeywell 97 Figure 5-38 The BPS Display Menu Log Here you can view the system log file. The system lists the following information. See Figure 5-39 . Log types include system operation, configuration operation, data management, alarm event, record operation, log clear and etc. Select the start time...

Understanding of Menu Operations and Controls 98 Figure 5-39 The Log Search Menu Version Here you can view some information related to this version. See Figure 5-40 . • Channel • Alarm in • Alarm out • System version: • Build Date

Honeywell 99 Figure 5-40 The Version Menu Online Users Here you can manage online users. See Figure 5-41 . You can disconnect one user or block one user if you have proper system rights. The max disconnection time during setup is 65535 seconds.

Understanding of Menu Operations and Controls 100 Figure 5-41 The Online Users Menu Shutdown Left click the shutdown button, the system will pop up a dialogue box for you to select. See Figure 5-42 . • Logout menu user: log out menu. You need to input password when you login the next time. • Restart...

Web Client Operation 102 6 Web Client Operation Note • All the operations here are based on HD-DVR-1016. • There might be slight differences in the interface due to the updated series. Network Connection Before the web client operation, please check the following items: • Network connection is right...

Honeywell 103 Figure 6-1 Sample of IE Login A system pop up with warning information will ask you if you want to install webrec.cab control. Please click yes button. If you can’t download the ActiveX file, please modify your settings as follows, enable or prompt all disabled Active X items. See Figu...

Web Client Operation 104 Figure 6-2 The Internet Options Window

Honeywell 105 Figure 6-3 The Settings for ActiveX After installation, the interface is shown as below. See Figure 6-4 Please input your user name and password. Default factory name is admin and password is admin. Note For security reasons, please modify your password after you first login.

Web Client Operation 106 Figure 6-4 The Web Login Window After you logged in, you can see the main window. See Figure 6-7 This main window can be divided into the following sections. Section 1: There are five function buttons: configuration, search, alarm, about, and log out . • Section 2: There are...

Honeywell 107 Figure 6-6 The Preview Window Switch Menu Figure 6-7 The Main Menu of Web Client Real-Time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in the current window. On the top left corner, you can view device IP, channel number, and ...

Web Client Operation 108 • 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. Right clicking mouse system restores original status. • 2: Change show mode: resize or switch to full screen mode. • 3: Local record. When you click the local record button, the system ...

Honeywell 109 Figure 6-11 Selection Menu of Local Play File PTZ Before PTZ operation, make sure you have properly set PTZ protocol. (Please refer to PTZ System Config  Pan/Tilt/Zoom). Click PTZ , and the interface is shown as in Figure 6-12 .

Web Client Operation 110 Figure 6-12 PTZ Control Menu Direction key and 3D positioning key In Figure 6-12 , there are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. When you click the 3D intelligent positioning key, the system goes back to...

Honeywell 111 Iris close Open In Figure 6-12 , click the PTZ setup button and you will see the following interface. See Figure 6-13 . Figure 6-13 The PTZ Setup Menu Auto Scan In Figure 6-13 , move the camera to your desired location and then rotate it to left rotation limit and click Left Limit . Th...

Web Client Operation 112 In Figure 6-13 , move the camera to your desired location and then input preset value. Click the add button, and you will have set one preset. Auto tour In Figure 6-13 , input the auto tour value and preset value. Click the add button, and you will have added one preset in t...

Honeywell 113 Or you can click the default button to use the system default setup. Figure 6-15 The Color Setup Menu Picture Path and Record Path Click “More”, and you can see an interface shown in Figure 6-16 . Figure 6-16 The More Setup Menu Click PIC Path , and you can see an interface shown in Fi...

Web Client Operation 114 Figure 6-18 The Path Setup Menu (for Record) Click Reboot , and the system pops up the following dialog box. See Figure 6-19. Please click OK to reboot. Figure 6-19 The Reboot Dialog Note If there’s an administrator (e.g. 888888) logged in DVR local menu, or web user doesn’t...

Honeywell 115 Figure 6-20 Version Information Menu HDD information Here you can view local storage status and network status including, free capacity and total capacity. See Figure 6-21 .

Web Client Operation 116 Figure 6-21 HDD Information Menu Log Here you can view system log. See Figure 6-22 .

Honeywell 117 Figure 6-22 Log Information Menu Click Backup , and the interface is shown in Figure 6-23 . Figure 6-23 Log Backup Menu

Web Client Operation 118 Please refer to the following sheet for log parameter information. Parameter Function Type Log types include: system operation, configuration operation, data management, alarm event, record operation, user management, log clear and file operation. Search You can select log t...

Honeywell 119 Figure 6-24 General Setup Menu Figure 6-25 DST Setup Menu (Date)

Honeywell 121 Encode interface is shown as in Figure 6-27 . Figure 6-27 The Encode Menu Figure 6-28 The Color Setting Menu Please refer to the following table for detailed information. Parameter Function Channel For selecting a monitor channel. Channel Name Displays current channel name. You can mod...

Honeywell 123 Parameter Function The OSD transparent value is not applicable in the current DVR version. You can use the mouse to drag the time tilte position. Channel Title You can enable this function so that the system overlays channel information in the video window. The OSD transparent value is...

Web Client Operation 124 Figure 6-30 The Schedule Setup Menu Figure 6-31 The Date and Time Setup Menu Please refer to the following sheet for detailed information.

Honeywell 125 Parameter Function Channel Please select a channel first. Pre-record Please input pre-record value here. System can record three to five seconds of video before activating the record operation in the file. (Depends on data size.) Setup In Figure 6-30 , click Set , and you can go to the...

Web Client Operation 126 Figure 6-32 The RS232 Setup Menu Please refer to the following sheet for detailed information. Parameter Function RS232 COM 01 Function Console is for debug and upgrade. Adapter is for system integration and function enhancement Data Bit The value ranges from 5 to 8. Stop Bi...

Honeywell 127 Network The network interface is shown as in Figure 6-33 . Figure 6-33 The Network Setup Menu Please refer to the following sheet for detailed information. Parameter Function Ethernet Please select the network card first. DHCP Dynamically get IP address. You can get the device IP from ...

Web Client Operation 128 Parameter Function Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. Please note if you want to reboot the device please make sure you have proper reboot authority and there is no local login user in the...

Honeywell 129 Parameter Function Sender Sender email address. Subject Input email subject here. Address Input receiver email address here. Max input three addresses. DDNS The DDNS interface is shown in Figure 6-35 . Figure 6-35 The DDNS Setup Menu Please refer to the following sheet for detailed inf...

Web Client Operation 130 Parameter Function User The user name you input to log in the server. Password The password you input to log in the server. Interval Device sends out a live signal to the server regularly. You can set interval value between the device and DDNS server here. NAS The NAS interf...

Honeywell 131 Parameter Function File length The file length you upload to the FTP. When the setup is larger than the actual file length, the system will upload the whole file. When the setup is smaller than the actual file length, the system only uploads the set length and auto ignores the remainin...

Web Client Operation 132 Figure 6-37 The NTP Setup Menu Alarm Alarm setup interface is shown as in Figure 6-38 .

Honeywell 133 Figure 6-38 The Alarm Setup Menu Please refer to the following sheet for detailed information. Parameter Function Event Type It includes local alarm/network alarm. Local alarm: Device detects alarm from input port. Network: Device detects alarm from network. Alarm in Select correspondi...

Web Client Operation 134 Parameter Function Alarm Out Enable alarm activation function. You need to select alarm output port so that the system can activate corresponding alarm device when alarm occurs. Alarm Latch System can delay the alarm output for specified time after alarm ended. The value ran...

Honeywell 135 Figure 6-39 The Detection Setup Menu Figure 6-40 The Detection Zone Setup Please refer to the following sheet for detailed information.

Web Client Operation 136 Parameter Function Event Type There are three types: Motion detection/video loss/Camera Masking. Channel Select channel name from the dropdown list, and check the checkbox beside it to enable its motion detection function. Sensitivity There are six levels. The sixth level ha...

Honeywell 137 alert you when alarms occur and end. Tour Display video in local monitor window by tour. If there are record channels selected, only the record channels will be displayed in the tour. PTZ Activation Here you can set PTZ movement when alarm occurs. Such as go to preset x when there is a...

Honeywell 139 Figure 6-42 The Default Setup Menu Please refer to the following sheet for detailed information. Parameter Function Select All Restore the factory default settings. Export Configuration Export system configuration to the local PC. Import Configuration Import configuration from PC to th...

Web Client Operation 140 Please select the storage device first and then you can see the items on your right become valid. You can check the corresponding item here. See Figure 6-43. Figure 6-43 The HDD Management Menu Please refer to the following sheet for detailed information. Parameter Function ...

Honeywell 141 Figure 6-44 The Alarm I/O Config Menu Please refer to the following chart for detailed information. Parameter Function Alarm out There are three alarm output channels. Schedule (Automatic) Start the alarm output automatically according to the settings of Detection/Alarm/Abnormity. Manu...

Web Client Operation 142 Figure 6-45 The Record Control Menu Please refer to the following chart for detailed information. Parameter Function Schedule (Auto) The system enables the auto record function as you set in record schedule setup. Manual Enable corresponding channel to record no matter what ...

Honeywell 143 Figure 6-46 The Account Management Menu Auto Maintenance Here you can select auto reboot and auto delete old file intervals from the dropdown list. See Figure 6-47.

Web Client Operation 144 Figure 6-47 The Auto Maintenance Menu Snapshot For Snapshot function, it can support D1/HD1/BCIF/CIF/QCIF.

Honeywell 145 Figure 6-48 Snapshot Please refer to the following sheet for detailed information. Parameter Function Channel It is the monitor channel. Snapshot mode There are two modes: Timing and activation. Frame rate You can select from the dropdown list. The value ranges from 1f/s to 7f/s. Resol...

Web Client Operation 146 Abnormity The abnormity interface is shown as below. Figure 6-49 The Abnormity Setup Menu Please refer to the following chart for detailed information. Parameter Function Event Type Possible abnormal errors include: no disk, disk no space, disk error, net error. You need to ...

Honeywell 147 message screen. Additional Function DNS Here you can set server or local operator DNS address. See Figure 6-50 below. Figure 6-50 DNS ATM/POS The ATM/POS function is the same with the card overlay function. It is mainly for financial areas to Sniffer, information parse and character ov...

Web Client Operation 148 There are total four groups IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal. The start position, length and data can be set according to your protocol and data packet. There are total ...

Honeywell 149 Figure 6-52 Auto Register Please refer to the following sheet for detailed information. Parameter Function Enable Enable auto register function. No. Device management server number. IP Device management server IP address. Port Server port number. Device ID Device ID in the device manag...

Web Client Operation 150 Please select record playback mode, and then select start time, end time and channel. Then please click the search button, you can see up to 100 corresponding files in the list. Figure 6-53 The Record Search Menu Select the files you want to download and then click Download ...

Honeywell 151 Figure 6-54 The Record Save Menu Now you can see the system begins to download and the Download button changes to the Stop button. You can click it to terminate the current operation. At the bottom of the interface, there is a process bar for your reference. See Figure 6-55.

Web Client Operation 152 Figure 6-55 The Record Search Menu (Saving) When the download has completed, you can see a dialogue box shown in Figure 6-56. Please click OK to exit. Figure 6-56 The Message Box after Download Completed Please refer to the following table for detailed information.

Honeywell 153 Type Parameter Function Type Record Search general record, alarm record and motion detection record. Alarm Search alarm record. Motion Detection Search motion detection record. Local Search local record. Snapshot Search snapshot file. Card This function is not available with current de...

Web Client Operation 154 • Pause • Stop • Slow play • Fast play Figure 6-57 The Playback Menu Alarm Click alarm function, and you can see an interface as shown in Figure 6-58 . Here you can set device alarm type and alarm sound setup. The IP address of playback device and channel number. Playback co...

Honeywell 155 Figure 6-58 The Alarm Function Menu Please refer to the following table for detailed information. Type Parameter Function Alarm Type Video loss System alarms when video loss occurs. Motion detect System alarms when motion detection alarm occurs, Disk full System alarms when disk is ful...

Web Client Operation 156 Sound pop-up System sends out alarm sound when alarm occurs. You can specify as you wish. Sound Path Here you can specify alarm sound file path. About Click About , and you can view the current web client information. See Figure 6-59 . Figure 6-59 The Web Client Information ...

Honeywell 157 Figure 6-60 The Logout Interface Un-install Web Control You can use web un-install tool “uninstall webrec.bat” in the CD to un-install web control. Note Before un-installation, please close all web pages, otherwise the un-installation might result in error.

Honeywell 159 4. There is no video output whether it is one-channel, multiple-channel or all-channel output. There are the following possibilities: • Program is incompatible. Please upgrade to the latest version. • Brightness is 0. Please restore factory default setup. • There is no video input sign...

FAQ 164 • No DirectX 8.1 or higher graphic acceleration software is installed. Please install the latest DirectX software. • There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. • No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. 23. Forgot...

Honeywell 165 8 Appendix HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). 1. According to formula (1), calculate storage capacity i q that is the capacity of each channel needed for each hour, unit M...

Appendix 166 ∑ = = c i i T m q 1 × a% (4) In the formula ： a% means alarm occurrence rate. Compatible USB Drive List Note Please upgrade the DVR firmware to the latest version to ensure the accuracy of the table below. If you use the USB drive, please confirm the format FAT or FAT32. Manufacturer Mo...

Honeywell Security Honeywell Security Asia Pacific 35F Tower A, City Center, 100 Zun Yi Road, Shanghai 200051, China TEL +86 21 22196888 FAX +86 21 62370740 Honeywell Security (China) Co., Ltd. Block 28, Section 2 Huai De Cui Gang Industrial Estate Fu Yong, Bao An, Shenzhen, P.R.China TEL +86 0755 2...

Honeywell iv Manual Record ........................................................................................................... 89 Account ...................................................................................................................... 89 Auto Maintain .....................

Honeywell i Explanation of Symbols This symbol is intended to alert the user to the presence of insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presenc...

Honeywell ii Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection. Caution Users of the product are responsible for checking and complying with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio si...

Honeywell iv 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled o...

Honeywell 1 1 Features and Specifications Overview HD-DVR-1004, HD-DVR-1008 and HD-DVR-1016 are excellent digital video surveillance products. They adopt embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality,...

Features and Specifications 2 Supports multi-channel audio and video. Independent hardware codecs encodes and decodes the audio and video signal from each channel to maintain video and audio synchronization. • Backup function Provides local backup via USB port for flash disks and portable HDDs IE we...

Honeywell 3 Specification Parameter HD-DVR-1004 HD-DVR-1008 HD-DVR-1016 System Main Processor High-performance industrial embedded micro controller OS Embedded LINUX System Resources Multiplex operations: simultaneous multi-channel recording, multi-channel playback and network operation Interface Us...

Honeywell 7 2 Overview and Controls This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first. Front Panel The front panel is shown in Figure 2-1 . Figure 2-1 The Front Panel of HD-DVR-1004/ HD-DVR-1008/ H...

Overview and Controls 8 ESC ESC Go to previous menu, or cancel current operation. During playback, click it to restore real-time monitor mode. Enter ENTER Confirm current operation Go to default button Go to menu Shift Shift In textbox, click this button to switch between numeral, English (Small/Cap...

Honeywell 9 USB port To connect USB storage device, USB mouse. Network abnormal indicator Net Network error occurs or there is no network connection, the light becomes red to alert you. HDD abnormal indicator HDD HDD error occurs or HDD capacity is below specified threshold value, the light becomes ...

Overview and Controls 10 Please refer to the following table for detailed information. No. Description 1 Video input 2 Audio input 3 Video CVBS output 4 Audio output 5 Network port 6 USB port 7 HDMI port 8 RS232 port 9 Video VGA output 10 Alarm input/alarm output/RS485 port 11 12VDC Power input port...

Honeywell 11 Figure 2-5 Device Connection Remote Controller The remote controller interface is shown as in Figure 2-6 .

Overview and Controls 12 Figure 2-6 Remote Controller No. Function 1 Record search 2 Multiple-window switch 3 0-9 number keys 4 ESC, Cancel 5 Reserved, not effective for HD-DVR-1004, HD-DVR-1008 and HD-DVR-1016 6 Confirm /menu key 7 Direction keys 8 Auxiliary function key 9 Remote address switch 10 ...

Honeywell 13 Mouse Control Left click mouse The password input dialogue box will pop up if you have not logged in. In real-time monitor mode, you can go to the main menu. When you have selected one menu item, left click the mouse to view menu content. Implement the control operation. Modify checkbox...

Installation and Connections 16 3 Installation and Connections Note All the installation and operations here should conform to your local electrical safety rules Unpack Everything Be sure to use all the accessories recommended by the manufacturer. Before installation, please open the package and che...

Honeywell 17 HDD Installation This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher. You can refer to the user guide for a recommended HDD brand. Please follow the instructions below to install the hard disk. 1. Loosen the screws of the upper cover. 2. Remove upper cover 3. Rota...

Installation and Connections 18 7. Connect the HDD cable and power cable. 8. Close the upper cover and turn in the screws. After completing HDD installation, please check the connection of the data ribbon and power cord. Connecting Power Supply Please check whether the input voltage and device power...

Honeywell 19 Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance. If the distance is too long, you should use twisted pair cable, and you can add video compensation devices or use optical fiber to ensure video quality. You should keep ...

Installation and Connections 20 Audio Output The audio output signal parameter is usually over 200mv 1KΩ ( BNC). It can directly connect to low impedance earphones, active sound box or amplifier-drive audio output device. If the sound box and the pick-up cannot be separated spatially, it is easy to ...

Honeywell 21 Alarm Input and Output Details You can refer to the following sheet and Figure 3-1 for alarm input and output information. Figure 3-1 Alarm Input and Output of HD-DVR-1004, HD-DVR-1008 (Left) and HD-DVR-1016 (Right) Parameter Grounding Alarm Ground line Alarm Input HD-DVR-1004: 1, 2, 3,...

Installation and Connections 22 Use the same ground with that of DVR if you use external power for the alarm device. Note Only indoor devices are recommended for being connected to HD-DVR-1004 / HD-DVR-1008 /HD-DVR-1016 alarm inputs. Figure 3-2 Sample of Alarm Input (Normal Close Type) Alarm Output ...

Honeywell 23 Between touches with different polarity 1000VAC 1minute Between touch and winding 1000VAC 1minute Surge voltage Between touches with same polarity 1500V (10×160us) Length of open time 3ms max Length of closed time 3ms max Longevity Mechanical 50×106 times (3Hz) Electrical 200×103 times ...

Installation and Connections 24 d “485 A, B” of DVR cannot connect parallel with “485 port” of other device. e. The voltage between of A, B lines of the decoder should be less than 5v. 2. Connect the other end of the cable to the proper pins in the connector on the camera. 3. Please follow the instr...

Honeywell 25 4 Overview of Navigation and Controls Before operation, please make sure you have properly installed HDD and all the cable connections. Note From this chapter, most descriptions and figures are based on HD-DVR-1016 operation. Login, Logout & Main Menu Login After the system has boot...

Overview of Navigation and Controls 26 Within 30 minutes, login failure three times will result in a system alarm buzz and login failure five times will result in account lock. Figure 4-1 Menu Login Main Menu After you have logged in, the system main menu will appear as shown below. See Figure 4-2 ....

Honeywell 27 Logout There are two ways for you to log out. One is from menu option: In the main menu, click the shut down button, and you can see an interface as shown below. See Figure 4-3 . Figure 4-3 Logout Menu You have several options. See Figure 4-4 . Figure 4-4 Options for Logout The other wa...

Overview of Navigation and Controls 28 Manual Record Live Viewing After you have logged in, the system is in live viewing mode. You can see the system date, time and channel name. If you want to change the system date and time, you can refer to general settings ( Main Menu  Setting  General ). If ...

Honeywell 29 • Manual: The highest priority. After being set to manual mode, all selected channels will start regular (continuous) recording. • Automatic: Channel recording follows recording schedule setting ( Main Menu  Setting  Schedule ) • Closed: the channel stops recording. Figure 4-5 Recordi...

Overview of Navigation and Controls 30 When system is in automatic recording, all channels will be recorded as you set up in Main menu  Setting  Schedule . The corresponding indication light on the front panel will turn on. Figure 4-7 Automatic Recording in All Channels • Manual recording in all c...

Honeywell 31 Figure 4-9 Stop Recording in All Channels Search & Playback Search Menu Click the search button in the main menu, search interface is shown below. See Figure 4-10 . Usually there are three file types: • R: Regular recording file. • A: External alarm recording file. • M: Motion detec...

Overview of Navigation and Controls 32 Figure 4-10 Record Search Menu Please refer to the following chart for more information. Serial Number Function 1 Play 2 Backward 3 Stop 4 Slow play 5 Fast play 6 Previous frame 7 Next frame 8 Volume 9 Previous file 10 Next channel 11 Next file 12 Previous chan...

Honeywell 33 13 Search 14 Backup Basic Operation Playback There are various search modes: video type, channel number or time. The system can display a max of128 files in one screen. You can use the page up/down button to view if there are more than one page. By selecting the file name and double cli...

Overview of Navigation and Controls 34 modes such as fast play 1, fast play 2 and more. different versions. Slow play button ► In playback mode, click this button to switch between various slow play modes such as slow play 1 or slow play 2. Play/Pause ► /  In normal/fast/slow playback mode, click t...

Honeywell 35 Figure 4-11 Sample of the Calendar Schedule After the system has booted up it will enter a default 24-hour regular mode. You can set the record type and time in schedule interface. Schedule Menu In the main menu, from Setting to Schedule, you can go to the schedule menu. See Figure 4-12...

Overview of Navigation and Controls 36 MD: In the selected time, the device will record when MD happens, like motion diction, video loss, video mask. Alarm: In the selected time, the device will record when there is alarm input. MD & Alarm: In the selected time, the device will record when MD ha...

Honeywell 37 the entire setup and then click the Save button to keep all of the modified settings. Redundancy Redundancy function allows you to save record file in several hard disks. When a record is damage in one disk, there is a spare one in the other disk, so that data reliability and safety is ...

Overview of Navigation and Controls 38 Please refer to the following figure for detailed information. Figure 4-13 Schedule Snapshot Setting

Honeywell 39 Activation Snapshot Please follow the steps listed below to enable the activation snapshot function. After you enabled this function, system can snapshot when the corresponding alarm occurred. • In Encode interface, click snapshot button to input snapshot mode, size, quality and frequen...

Overview of Navigation and Controls 40 Priority Please note the activation snapshot has the higher priority than schedule snapshot. If you have enabled these two types at the same

Honeywell 41 time, system can activate the activation snapshot when alarm occurs, and otherwise system just operates the schedule snapshot. Image FTP In Network interface, you can set FTP server information. Please enable FTP function and then click save button. Please boot up corresponding FTP serv...

Overview of Navigation and Controls 42 • Delay: When detected motion is completed, the system will continue alarm output and recording for a specified time respectively. The value ranges from 10-300(Unit: second). • Region: Click Select , the interface is shown as in Figure 4-16 . Here you can set t...

Honeywell 43 Figure 4-15 Motion Detection Menu Figure 4-16 Motion Detection Zone Setting

Overview of Navigation and Controls 44 Figure 4-17 PTZ Activation Setting Figure 4-18 Armed Period Setting

Honeywell 45 Figure 4-19 Business Day and Non-Business Day Setting Video Loss In Figure 4-15 , select “Video Loss” from the type list. You can see the interface is shown in Figure 4-20 . This function allows you to be informed when video loss has occurred. You can enable the alarm output channel and...

Overview of Navigation and Controls 46 Figure 4-20 Menu of Video Loss Camera Masking When someone viciously masks the camera lens, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 4-21 . Tips: You can enable preset/tour/pattern activation operati...

Honeywell 47 Figure 4-21 Menu of Camera Masking Alarm Setup and Alarm Activation Before operation, make sure you have properly connected alarm devices such as the buzzer. Go to alarm setup interface On the main menu, from Setting to Alarm, you can see the alarm setup interface. See Figure 4-22 . Ala...

Overview of Navigation and Controls 48 • PTZ activation: Here you can set PTZ movement when the alarm occurs. For example, go to preset, tour& pattern when there is an alarm. Click Select , and you can see an interface as shown in Figure 4-26 . • Period: Click Set , and you can see an interface ...

Honeywell 49 Figure 4-22 Menu of the Alarm Figure 4-23 The settings of PTZ Activation

Overview of Navigation and Controls 50 Figure 4-24 Period Setup Figure 4-25 The Settings of Business Days and Non-Business Days Backup DVR supports various backup devices such as CD-RW, DVD driver, USB backup and network download. The records can be played with PC by the Record Player contained in t...

Honeywell 51 Detect Device Click Backup , and you can see an interface shown in Figure 4-26 . Here you can view device information. You can view the backup device name and its total space and free space. The device includes a USB burner, flash disk, SD card and portable HDD. Note The USB Flash Disk ...

Overview of Navigation and Controls 52 When the system completes backup, you can see a dialogue box prompting successful backup. Figure 4-27 Backup Menu with Search Results Click Start , and the system will begin the burning process. At the same time, the Start button will change to the Stop button....

Honeywell 53 The file name format usually is: SN_CH+channel number+time Y+M+D+H+M+S. In the file name, the YDM format is the same as what you set in general interface ( Main Menu  Setting  General ). The file extension name is “.dav”. You can visit our website to view listed CD-ROM brands. Tips: D...

Honeywell 55 Figure 4-29 PTZ Setup Menu After completing all the settings click Save . In the single window display (View 1) mode, right-click to open the interface shown in Figure 4-30 (by clicking Fn in the front panel or in the remote controller will cause a menu to appear with only Pan/Tilt/Zoom...

Overview of Navigation and Controls 56 • 8 direction arrows for PTZ position adjustment • Zoom • Focus • Iris Click the buttons and to adjust zoom, focus and iris. Note Some functions are not supported by some PTZ speed dome. For example, Zoom, Focus, Iris and Pattern are not supported by HSPT-120. ...

Honeywell 57 Preset/Tour/Pattern/Scan Operations In Figure 4-31 , click Set . The interface is shown as below. See Figure 4-32 . Here you can set the following items: • Preset • Tour • Pattern • Border Figure 4-32 PTZ Setup Menu In Figure 4-31 , click Page Switch . The interface is shown in Figure 4...

Overview of Navigation and Controls 58 Figure 4-33 Function Menu Note • Preset, tour and pattern all need the value to be the control parameter. You can define it as you require. • You need to refer to your speed dome user’s manual for the auxiliary function definition. In some cases, it can be used...

Honeywell 59 Figure 4-34 Preset Setup Activate Preset In Figure 4-33 , input the preset number in the “No.” field, and click Preset . Patrol setup (Tour Setup) In Figure 4-32 , click Patrol . The interface is shown in Figure 4-35 . Input the preset number and add this preset to a patrol (tour). For ...

Overview of Navigation and Controls 60 Activate Patrol (tour) In Figure 4-32 , input the patrol (tour) number in the No. blank and click the patrol button. Pattern Setup In Figure 4-32 , click Pattern and then click “ begin . The interface is shown as in Figure 4-36 . Then you can go to Figure 4-31 ...

Honeywell 61 Figure 4-37 Auto Scan Setup Activate Auto Scan In Figure 4-33 , click Auto Scan , and the system will begin to auto scan. Correspondingly, the Auto Scan button will change to the Stop button. Click Stop to terminate the scan operation. Click Page Switch again, and the system will go bac...

Understanding of Menu Operations and Controls 62 5 Understanding of Menu Operations and Controls Menu Tree This series DVR menu tree is shown as below:

Understanding of Menu Operations and Controls 64 Main Menu After you have logged in, the system main menu will appear as shown below. See Figure 5-1 . There are a total of six buttons: Search , Info , Setting , Backup , Advanced , and Shutdown . Move the cursor to highlight the icon, and then double...

Understanding of Menu Operations and Controls 66 Figure 5-2 General Setup Menu Figure 5-3 DST Setup Menu (Week) Figure 5-4 DST setup menu (Date) Encode Encode setting includes the following items. See Figure 5-5 . Note that some series do not support extra stream.

Honeywell 67 • Channel: Select the channel you want. • Compression: System supports H.264. • Resolution: System supports various resolutions, D1(4CIF)/CIF/QCIF. You can select from the dropdown list. The extra stream of each channel supports only QCIF resolution. • Bit rate: System supports two type...

Understanding of Menu Operations and Controls 68 Figure 5-5 Encode Menu Figure 5-6 Overlay Menu Schedule Refer to Schedule RS232 RS232 interface is shown as follows. There are five items. See Figure 5-7 .

Honeywell 69 • Function: There are two modes for you to select. Console is for serial port or min-end platform to upgrade program. Adaptor is reserved for system integration or function enhancement. • Baud rate: You can select proper baud rate. • Data bit: You can select proper data bit. • Stop bit:...

Understanding of Menu Operations and Controls 70 • IP address: Here you can input the IP address. • DHCP: It is to activate auto search IP. When you enable the DHCP function, you cannot modify the IP/Subnet mask /Gateway. These values are from the DHCP function. If you have not enabled the DHCP func...

Honeywell 71 Advanced setup interface is shown in Figure 5-9 . Draw a circle to enable the corresponding function and then double-click the current item to go to the setup interface. Figure 5-9 Advanced Settings IP Filter IP filter interface is shown in Figure 5-10 . You can add IP in the following ...

Understanding of Menu Operations and Controls 72 · IP multiple cast group address -224.0.0.0-239.255.255.255 -“D” address space · The higher four-bit of the first byte=”1110” · Reserved local multiple cast group address -224.0.0.0-224.0.0.255 -TTL=1 When sending out telegraph -For example 224.0.0.1 ...

Honeywell 73 Click Save , you need to restart to activate your configuration. After rebooting, DVR will connect to the internet automatically. The IP in the PPPoE is the DVR dynamic value. You can access this IP to visit the unit. Figure 5-11 The PPPoE Setup Menu NTP Setup You need to install SNTP s...

Understanding of Menu Operations and Controls 74 Beijing (Hong Kong) GMT+8 Tokyo GMT+9 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Middle Atlantic...

Honeywell 75 http://(Domain Name) e.g.: http://site.3322.org) Now you can open the DDNS Server web search page. Figure 5-13 The DDNS Setup Menu Note that the NNDS type includes: CN99 DDNS 、 NO-IP DDNS 、 Private DDNS 、 Dyndns DDNS and sysdns DDNS. The private DDNS function is reserved for integration...

Understanding of Menu Operations and Controls 76 Figure 5-14 The FTP Server Setup Menu You can use a PC or FTP login tool to test setup. For example, you can login user ZHY to

Honeywell 77 Figure 5-16 The FTP Setup Menu Please check the box left to Enable to activate the FTP function. Here you can input the FTP server address, port and remote directory. When the remote directory is null, the system automatically creates folders according to the IP, time and channel. User ...

Understanding of Menu Operations and Controls 78 Figure 5-17 The Email Setup Menu Refer to the following table for detailed information. Parameter Function SMTP Server Input server address and then enable this function. Port Default value is 25. You can modify it if necessary. User Name The sender e...

Honeywell 79 • Under Windows Command Prompt, input ping smtp.google.com then press return. • The displayed IP address 74.125.45.25 is the SMTP server IP address. Figure 5-18 The Command Window Alarm Refer to Alarm Setup and Alarm Activation . Detect Refer to Detect . Pan/Tilt/Zoom The pan/tilt/zoom ...

Understanding of Menu Operations and Controls 80 After completing all the setups click Save , and the system will go back to the previous menu. For a detailed setup, refer to Preset/Tour/Pattern/Scan Operations . Figure 5-19 The PTZ Setup Menu Display Display setup interface is shown as below. See F...

Honeywell 81 • Interval: Input proper interval value here. The value ranges from 5-120 seconds. In tour process, you can use the mouse or click Shift to turn on the window switch function. Stands for opening switch function, stands for the closing switch function. • Motion tour and alarm tour type: ...

Understanding of Menu Operations and Controls 82 Figure 5-21 The Channel Name Setup Menu In tour mode, you can see the following interface. On the right corner, right-click the mouse or click Shift , and you can control the tour. There are two buttons: stands for enabling window switch and stands fo...

Honeywell 83 Default Click Default , a dialogue box will pop up. You restore default factory setup of the following functions by checking the boxes next to the items. See Figure 5-23 . • Select all • General • Encode • Schedule • RS232 • Network • Alarm • Detect • Pan/tilt/zoom • Display • Channel n...

Understanding of Menu Operations and Controls 84 Figure 5-23 The Default Setup Menu Advanced Select Advanced on the main window and the interface is shown as follows. See Figure 5-24 . There are seven function keys in total: HDD management, alarm output, abnormity, manual record, account, auto maint...

Honeywell 85 Figure 5-24 The Advanced Menu HDD Management Here you can view and implement hard disk management. See Figure 5-25 . You can see current HDD type, status, capacity and record time. By selecting items in the dropdown list and click Execute , you can switch HDD mode between read/write and...

Understanding of Menu Operations and Controls 86 Figure 5-25 The HDD Management Setup Menu Click Alarm Set , and the interface is shown as follows. See Figure 5-26 (this interface is just like the abnormity setup). Refer to Abnormity for detailed information. Please check boxes to select the corresp...

Honeywell 87 Figure 5-26 The Abnormity Setup Menu Abnormity Abnormity interface is shown in Figure 5-27 . • Event type: There are several options for you such as disk error, no disk and etc. • Alarm output: alarm activation output port (multiple choices). The 3-ch is controllable 12V output. • Delay...

Understanding of Menu Operations and Controls 88 Figure 5-27 The Sample of No Disk Abnormity Alarm Output Here you can set proper alarm output. Automatic : start the alarm output automatically according to the settings of Detection/Alarm/Abnormity. Manual : manually start the alarm output Closed : m...

Honeywell 89 Manual Record Refer to Manual Record . Account Here you can implement account management. See Figure 5-29 . to see how to: • Add new user • Modify user • Add group • Modify group • Modify password. For account management please note: • The system account adopts two-level management: gro...

Understanding of Menu Operations and Controls 90 Figure 5-29 The Account Management Menu Auto Maintain Here you can set auto-reboot time and auto-delete old files setup. See Figure 5-30 . You can select proper setup from the dropdown list. After all the setups please Save , and the system will retur...

Honeywell 91 TV Adjust Here you can adjust the TV output setup. See Figure 5-31 . Please drag slide bar to adjust each item. After all the setups please click OK , the system will return to the previous menu. Figure 5-31 The TV Adjust Menu Text Overlay The card overlay function is for financial area...

Understanding of Menu Operations and Controls 92 Overlay mode: There are two options: preview and encode. Preview means overlay the card number in the local monitor video. Encode means overlay the card number in the record file. Overlay Position: Here you can select the proper overlay position from ...

Honeywell 93 Figure 5-33 Text Overlay(Network Type) For the ATM/POS don’t include protocols, the interface is shown in Figure 5-34 . Source IP refers to host IP address that sends out information (usually it is the device host.) Destination IP refers to other systems that receive information. Usuall...

Understanding of Menu Operations and Controls 94 Figure 5-34 ATM/POS Click Data button you can see an interface is shown in Figure 5-35 . Here you can set offset value, length, title according to your communication protocol and data package. Figure 5-35 Data Format

Honeywell 95 Information Here you can view system information. There is a total of five items: HDD (hard disk information), BPS (data stream statistics), Log and version, and online user. See Figure 5-36 . Figure 5-36 The Info Menu HDD Information Here is a list of hard disk type, total space, free ...

Understanding of Menu Operations and Controls 96 Setting  General to adjust system time or go to Advanced  HDD Management to format the problematic HDD and then reboot the DVR. Figure 5-37The HDD Info Menu Tips: Click Fn or left click the mouse button to view the HDD record time and HDD type and t...

Honeywell 97 Figure 5-38 The BPS Display Menu Log Here you can view the system log file. The system lists the following information. See Figure 5-39 . Log types include system operation, configuration operation, data management, alarm event, record operation, log clear and etc. Select the start time...

Understanding of Menu Operations and Controls 98 Figure 5-39 The Log Search Menu Version Here you can view some information related to this version. See Figure 5-40 . • Channel • Alarm in • Alarm out • System version: • Build Date

Honeywell 99 Figure 5-40 The Version Menu Online Users Here you can manage online users. See Figure 5-41 . You can disconnect one user or block one user if you have proper system rights. The max disconnection time during setup is 65535 seconds.

Understanding of Menu Operations and Controls 100 Figure 5-41 The Online Users Menu Shutdown Left click the shutdown button, the system will pop up a dialogue box for you to select. See Figure 5-42 . • Logout menu user: log out menu. You need to input password when you login the next time. • Restart...

Web Client Operation 102 6 Web Client Operation Note • All the operations here are based on HD-DVR-1016. • There might be slight differences in the interface due to the updated series. Network Connection Before the web client operation, please check the following items: • Network connection is right...

Honeywell 103 Figure 6-1 Sample of IE Login A system pop up with warning information will ask you if you want to install webrec.cab control. Please click yes button. If you can’t download the ActiveX file, please modify your settings as follows, enable or prompt all disabled Active X items. See Figu...

Web Client Operation 104 Figure 6-2 The Internet Options Window

Honeywell 105 Figure 6-3 The Settings for ActiveX After installation, the interface is shown as below. See Figure 6-4 Please input your user name and password. Default factory name is admin and password is admin. Note For security reasons, please modify your password after you first login.

Web Client Operation 106 Figure 6-4 The Web Login Window After you logged in, you can see the main window. See Figure 6-7 This main window can be divided into the following sections. Section 1: There are five function buttons: configuration, search, alarm, about, and log out . • Section 2: There are...

Honeywell 107 Figure 6-6 The Preview Window Switch Menu Figure 6-7 The Main Menu of Web Client Real-Time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in the current window. On the top left corner, you can view device IP, channel number, and ...

Web Client Operation 108 • 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. Right clicking mouse system restores original status. • 2: Change show mode: resize or switch to full screen mode. • 3: Local record. When you click the local record button, the system ...

Honeywell 109 Figure 6-11 Selection Menu of Local Play File PTZ Before PTZ operation, make sure you have properly set PTZ protocol. (Please refer to PTZ System Config  Pan/Tilt/Zoom). Click PTZ , and the interface is shown as in Figure 6-12 .

Web Client Operation 110 Figure 6-12 PTZ Control Menu Direction key and 3D positioning key In Figure 6-12 , there are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. When you click the 3D intelligent positioning key, the system goes back to...

Honeywell 111 Iris close Open In Figure 6-12 , click the PTZ setup button and you will see the following interface. See Figure 6-13 . Figure 6-13 The PTZ Setup Menu Auto Scan In Figure 6-13 , move the camera to your desired location and then rotate it to left rotation limit and click Left Limit . Th...

Web Client Operation 112 In Figure 6-13 , move the camera to your desired location and then input preset value. Click the add button, and you will have set one preset. Auto tour In Figure 6-13 , input the auto tour value and preset value. Click the add button, and you will have added one preset in t...

Honeywell 113 Or you can click the default button to use the system default setup. Figure 6-15 The Color Setup Menu Picture Path and Record Path Click “More”, and you can see an interface shown in Figure 6-16 . Figure 6-16 The More Setup Menu Click PIC Path , and you can see an interface shown in Fi...

Web Client Operation 114 Figure 6-18 The Path Setup Menu (for Record) Click Reboot , and the system pops up the following dialog box. See Figure 6-19. Please click OK to reboot. Figure 6-19 The Reboot Dialog Note If there’s an administrator (e.g. 888888) logged in DVR local menu, or web user doesn’t...

Honeywell 115 Figure 6-20 Version Information Menu HDD information Here you can view local storage status and network status including, free capacity and total capacity. See Figure 6-21 .

Web Client Operation 116 Figure 6-21 HDD Information Menu Log Here you can view system log. See Figure 6-22 .

Honeywell 117 Figure 6-22 Log Information Menu Click Backup , and the interface is shown in Figure 6-23 . Figure 6-23 Log Backup Menu

Web Client Operation 118 Please refer to the following sheet for log parameter information. Parameter Function Type Log types include: system operation, configuration operation, data management, alarm event, record operation, user management, log clear and file operation. Search You can select log t...

Honeywell 119 Figure 6-24 General Setup Menu Figure 6-25 DST Setup Menu (Date)

Honeywell 121 Encode interface is shown as in Figure 6-27 . Figure 6-27 The Encode Menu Figure 6-28 The Color Setting Menu Please refer to the following table for detailed information. Parameter Function Channel For selecting a monitor channel. Channel Name Displays current channel name. You can mod...

Honeywell 123 Parameter Function The OSD transparent value is not applicable in the current DVR version. You can use the mouse to drag the time tilte position. Channel Title You can enable this function so that the system overlays channel information in the video window. The OSD transparent value is...

Web Client Operation 124 Figure 6-30 The Schedule Setup Menu Figure 6-31 The Date and Time Setup Menu Please refer to the following sheet for detailed information.

Honeywell 125 Parameter Function Channel Please select a channel first. Pre-record Please input pre-record value here. System can record three to five seconds of video before activating the record operation in the file. (Depends on data size.) Setup In Figure 6-30 , click Set , and you can go to the...

Web Client Operation 126 Figure 6-32 The RS232 Setup Menu Please refer to the following sheet for detailed information. Parameter Function RS232 COM 01 Function Console is for debug and upgrade. Adapter is for system integration and function enhancement Data Bit The value ranges from 5 to 8. Stop Bi...

Honeywell 127 Network The network interface is shown as in Figure 6-33 . Figure 6-33 The Network Setup Menu Please refer to the following sheet for detailed information. Parameter Function Ethernet Please select the network card first. DHCP Dynamically get IP address. You can get the device IP from ...

Web Client Operation 128 Parameter Function Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. Please note if you want to reboot the device please make sure you have proper reboot authority and there is no local login user in the...

Honeywell 129 Parameter Function Sender Sender email address. Subject Input email subject here. Address Input receiver email address here. Max input three addresses. DDNS The DDNS interface is shown in Figure 6-35 . Figure 6-35 The DDNS Setup Menu Please refer to the following sheet for detailed inf...

Web Client Operation 130 Parameter Function User The user name you input to log in the server. Password The password you input to log in the server. Interval Device sends out a live signal to the server regularly. You can set interval value between the device and DDNS server here. NAS The NAS interf...

Honeywell 131 Parameter Function File length The file length you upload to the FTP. When the setup is larger than the actual file length, the system will upload the whole file. When the setup is smaller than the actual file length, the system only uploads the set length and auto ignores the remainin...

Web Client Operation 132 Figure 6-37 The NTP Setup Menu Alarm Alarm setup interface is shown as in Figure 6-38 .

Honeywell 133 Figure 6-38 The Alarm Setup Menu Please refer to the following sheet for detailed information. Parameter Function Event Type It includes local alarm/network alarm. Local alarm: Device detects alarm from input port. Network: Device detects alarm from network. Alarm in Select correspondi...

Web Client Operation 134 Parameter Function Alarm Out Enable alarm activation function. You need to select alarm output port so that the system can activate corresponding alarm device when alarm occurs. Alarm Latch System can delay the alarm output for specified time after alarm ended. The value ran...

Honeywell 135 Figure 6-39 The Detection Setup Menu Figure 6-40 The Detection Zone Setup Please refer to the following sheet for detailed information.

Web Client Operation 136 Parameter Function Event Type There are three types: Motion detection/video loss/Camera Masking. Channel Select channel name from the dropdown list, and check the checkbox beside it to enable its motion detection function. Sensitivity There are six levels. The sixth level ha...

Honeywell 137 alert you when alarms occur and end. Tour Display video in local monitor window by tour. If there are record channels selected, only the record channels will be displayed in the tour. PTZ Activation Here you can set PTZ movement when alarm occurs. Such as go to preset x when there is a...

Honeywell 139 Figure 6-42 The Default Setup Menu Please refer to the following sheet for detailed information. Parameter Function Select All Restore the factory default settings. Export Configuration Export system configuration to the local PC. Import Configuration Import configuration from PC to th...

Web Client Operation 140 Please select the storage device first and then you can see the items on your right become valid. You can check the corresponding item here. See Figure 6-43. Figure 6-43 The HDD Management Menu Please refer to the following sheet for detailed information. Parameter Function ...

Honeywell 141 Figure 6-44 The Alarm I/O Config Menu Please refer to the following chart for detailed information. Parameter Function Alarm out There are three alarm output channels. Schedule (Automatic) Start the alarm output automatically according to the settings of Detection/Alarm/Abnormity. Manu...

Web Client Operation 142 Figure 6-45 The Record Control Menu Please refer to the following chart for detailed information. Parameter Function Schedule (Auto) The system enables the auto record function as you set in record schedule setup. Manual Enable corresponding channel to record no matter what ...

Honeywell 143 Figure 6-46 The Account Management Menu Auto Maintenance Here you can select auto reboot and auto delete old file intervals from the dropdown list. See Figure 6-47.

Web Client Operation 144 Figure 6-47 The Auto Maintenance Menu Snapshot For Snapshot function, it can support D1/HD1/BCIF/CIF/QCIF.

Honeywell 145 Figure 6-48 Snapshot Please refer to the following sheet for detailed information. Parameter Function Channel It is the monitor channel. Snapshot mode There are two modes: Timing and activation. Frame rate You can select from the dropdown list. The value ranges from 1f/s to 7f/s. Resol...

Web Client Operation 146 Abnormity The abnormity interface is shown as below. Figure 6-49 The Abnormity Setup Menu Please refer to the following chart for detailed information. Parameter Function Event Type Possible abnormal errors include: no disk, disk no space, disk error, net error. You need to ...

Honeywell 147 message screen. Additional Function DNS Here you can set server or local operator DNS address. See Figure 6-50 below. Figure 6-50 DNS ATM/POS The ATM/POS function is the same with the card overlay function. It is mainly for financial areas to Sniffer, information parse and character ov...

Web Client Operation 148 There are total four groups IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal. The start position, length and data can be set according to your protocol and data packet. There are total ...

Honeywell 149 Figure 6-52 Auto Register Please refer to the following sheet for detailed information. Parameter Function Enable Enable auto register function. No. Device management server number. IP Device management server IP address. Port Server port number. Device ID Device ID in the device manag...

Web Client Operation 150 Please select record playback mode, and then select start time, end time and channel. Then please click the search button, you can see up to 100 corresponding files in the list. Figure 6-53 The Record Search Menu Select the files you want to download and then click Download ...

Honeywell 151 Figure 6-54 The Record Save Menu Now you can see the system begins to download and the Download button changes to the Stop button. You can click it to terminate the current operation. At the bottom of the interface, there is a process bar for your reference. See Figure 6-55.

Web Client Operation 152 Figure 6-55 The Record Search Menu (Saving) When the download has completed, you can see a dialogue box shown in Figure 6-56. Please click OK to exit. Figure 6-56 The Message Box after Download Completed Please refer to the following table for detailed information.

Honeywell 153 Type Parameter Function Type Record Search general record, alarm record and motion detection record. Alarm Search alarm record. Motion Detection Search motion detection record. Local Search local record. Snapshot Search snapshot file. Card This function is not available with current de...

Web Client Operation 154 • Pause • Stop • Slow play • Fast play Figure 6-57 The Playback Menu Alarm Click alarm function, and you can see an interface as shown in Figure 6-58 . Here you can set device alarm type and alarm sound setup. The IP address of playback device and channel number. Playback co...

Honeywell 155 Figure 6-58 The Alarm Function Menu Please refer to the following table for detailed information. Type Parameter Function Alarm Type Video loss System alarms when video loss occurs. Motion detect System alarms when motion detection alarm occurs, Disk full System alarms when disk is ful...

Web Client Operation 156 Sound pop-up System sends out alarm sound when alarm occurs. You can specify as you wish. Sound Path Here you can specify alarm sound file path. About Click About , and you can view the current web client information. See Figure 6-59 . Figure 6-59 The Web Client Information ...

Honeywell 157 Figure 6-60 The Logout Interface Un-install Web Control You can use web un-install tool “uninstall webrec.bat” in the CD to un-install web control. Note Before un-installation, please close all web pages, otherwise the un-installation might result in error.

Honeywell 159 4. There is no video output whether it is one-channel, multiple-channel or all-channel output. There are the following possibilities: • Program is incompatible. Please upgrade to the latest version. • Brightness is 0. Please restore factory default setup. • There is no video input sign...

FAQ 164 • No DirectX 8.1 or higher graphic acceleration software is installed. Please install the latest DirectX software. • There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. • No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. 23. Forgot...

Honeywell 165 8 Appendix HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). 1. According to formula (1), calculate storage capacity i q that is the capacity of each channel needed for each hour, unit M...

Appendix 166 ∑ = = c i i T m q 1 × a% (4) In the formula ： a% means alarm occurrence rate. Compatible USB Drive List Note Please upgrade the DVR firmware to the latest version to ensure the accuracy of the table below. If you use the USB drive, please confirm the format FAT or FAT32. Manufacturer Mo...

Honeywell Security Honeywell Security Asia Pacific 35F Tower A, City Center, 100 Zun Yi Road, Shanghai 200051, China TEL +86 21 22196888 FAX +86 21 62370740 Honeywell Security (China) Co., Ltd. Block 28, Section 2 Huai De Cui Gang Industrial Estate Fu Yong, Bao An, Shenzhen, P.R.China TEL +86 0755 2...