Honeywell F300E- Manuals

Page 2 - F300E ELECTRONIC AIR CLEANER; SPECIFICATIONS

F300E ELECTRONIC AIR CLEANER 68-0240-1 2 SPECIFICATIONS IMPORTANT The specifications given in this publication do notinclude normal manufacturing tolerances.Therefore, this unit may not exactly match the listedspecifications. This product is tested and calibratedunder closely controlled conditions, ...

Page 4 - PLANNING THE INSTALLATION; Application; IMPORTANT; Do not mount in the discharge air duct.; Applications with Air Conditioning

F300E ELECTRONIC AIR CLEANER 68-0240-1 4 Fig. 2. Installation dimensions of Electronic Air Cleaner in in. (mm). PLANNING THE INSTALLATION Application The F300E Electronic Air Cleaner is used in a forced airheating, cooling, or ventilating system. It removes airbornepar ticles from the air circulated...

Page 5 - Mount it as far as possible upstream from the air; Applications with an Activated Carbon Filter; Return air temperature must be at least 40; Optional W8600F Air Cleaner Monitor; Choose Location; WARNING

F300E ELECTRONIC AIR CLEANER 68-0240-1 5 1. Mount it as far as possible upstream from the air cleaner. 2. Install a standard disposable furnace filter between the humidifier and the air cleaner to trap water dropletsand hard water salts. 3. Frequently clean the air cleaner to prevent a hard water sa...

Page 6 - Fig. 3. Mounting positions with variety of furnace installations.; Determine Duct Design Requirements; Transitions; to minimize turbulence.; Fig. 5. Typical use of duct offset to allow

F300E ELECTRONIC AIR CLEANER 68-0240-1 6 Fig. 3. Mounting positions with variety of furnace installations. Determine Duct Design Requirements The air cleaner is adaptable to all new or existing forced airheating, cooling and ventilating systems used in residentialapplications. Transitions, turning v...

Page 7 - INSTALLATION

F300E ELECTRONIC AIR CLEANER 68-0240-1 7 ❑ Place blocks under the cabinet so the unit is firmlysuppor ted and level. The 5/8 in. (16 mm) mounting foot onthe cabinet hinge plate provides the minimum clearancerequired for the access door hinge. ❑ Attach the cabinet securely to the furnace. The unit ca...

Page 8 - turning vanes. Locking pliers hold duct to air; Install Optional W8600F Air Cleaner Monitor; Function Indicator Panel.; Air Cleaner Monitor; Mounting; Hold the mounting template (included in the bag; Indicators

F300E ELECTRONIC AIR CLEANER 68-0240-1 8 Fig. 7. Connect ductwork to air cleaner. Note turning vanes. Locking pliers hold duct to air cleaner cabinet during installation. Install Optional W8600F Air Cleaner Monitor The W8600F Air Cleaner Monitor is an option available foruse with the F300E. The W860...

Page 9 - Select Wash Frequency

F300E ELECTRONIC AIR CLEANER 68-0240-1 9 Select Wash Frequency Use the W8600F DIP switches to program the time betweenSERVICE indications. Be sure to select the setting accordingto the conditions of the home. Factors to consider include theduty cycle of the EAC, the number of people and pets, andact...

Page 10 - Plug the driver board assembly into the J1 power; Connect terminal 1 to 1, 3 to 3 and 4 to 4.; Set DIP Switches; Set then DIP switches according to equipment; is not installed in the home.; Battery

F300E ELECTRONIC AIR CLEANER 68-0240-1 10 10. Plug the driver board assembly into the J1 power supply connector. 11. Replace the power supply box cover.12. Connect the three wires from the W8600F to the EAC terminals 1, 3 and 4. See Fig 12. The W8600A function indicator panel has four liquid crystal...

Page 11 - NOTE: The UV air treatment system and the humidifier; Seal Joints

F300E ELECTRONIC AIR CLEANER 68-0240-1 11 Fig. 16. Position of cell key determines orientation of cell (arrow on key must point downstream). 4. Tighten the screw into the new hole.5. Insert the electronic cell. The ionizer section will now be on the air-entering (upstream) side of the cabinet. Attac...

Page 12 - Complete Wiring; Fig. 18. Internal schematic for electronic air cleaner with W8600F.

F300E ELECTRONIC AIR CLEANER 68-0240-1 12 P3 P4 P1 P2 J3 BLACK W4 W2 W1 W3 AIRFLOW SWITCH BOARD ORANGE GRAY VIOLET BLACK 1 INTERLOCK SWITCH. 2 SHORTING BAR. 3 AIRFLOW SWITCH DISABLE JUMPER. 4 OPTIONAL W8600F AIR CLEANER MONITOR. DRIVER BOARD AND CABLE PROVIDED WITH W8600F. 5 NEON LIGHT. M11975 POWER...

Page 13 - Check Air Cleaner Operation; Turn off the system blower. The neon light should go; SERVICE; CAUTION; Remove the power cord green lead from the green; OPERATION; Inspect the Installation

F300E ELECTRONIC AIR CLEANER 68-0240-1 13 • Outside air, if used, is mixed with return air or heated, asnecessary, before it can reach the air cleaner. • Airflow arrows on the electronic cell point downstream. • Prefilter is on the upstream side of the cell. • Cell handle faces outward. • Electronic...

Page 14 - Automatic Dishwasher

F300E ELECTRONIC AIR CLEANER 68-0240-1 14 NOTE: To let the heating or air conditioning systemoperate normally while the cell(s) are beingwashed, simply turn off the air cleaner switch. Vacuum the prefilter or brush, or soak it in a tub. Do notwash the prefilter in the dishwasher or car wash. Automat...

Page 15 - Replacing Ionizer Wires

F300E ELECTRONIC AIR CLEANER 68-0240-1 15 Fig. 23. Replacing an ionizer wire. COLLECTORTERMINAL COLLECTORTERMINAL IONIZERTERMINAL M6155 5. Rinse the cell(s) and prefilter(s) with a hard spray of very hot water; rinse the tub clean, then fill the tub withclean hot water and soak for 5 to 15 minutes. ...

Page 16 - Modification to Reduce Ozone Odor; Install an activated carbon filter downstream from the; This will reduce ozone production about 20 to 25; Open the access door.

F300E ELECTRONIC AIR CLEANER 68-0240-1 16 Modification to Reduce Ozone Odor WARNING Electric Shock Hazard.Can cause personal injury.Always disconnect power and open the access doorbefore opening the power supply cover. The electronic air cleaner generates a small amount ofozone in normal operation. ...

Page 18 - REPLACEMENT PARTS/EXPLODED VIEW; Nominal Return Air Opening

F300E ELECTRONIC AIR CLEANER 68-0240-1 18 REPLACEMENT PARTS/EXPLODED VIEW Nominal Return Air Opening No. Description 16 x 20 in. (406 x 508 mm) 16 x 25 in. (406 x 635 mm) 20 x 20 in. (508 x 508 mm) 20 x 25 in. (508 x 635 mm) 1 Access Door 32004876-004 32004876-004 32004876-003 32004876-003 2 Electro...

Page 20 - Parts and Accessories Not Illustrated; ELECTRICAL TROUBLESHOOTING; Tools and Equipment; Troubleshooting Procedure; Air Cleaner Cabinet Gasket Kit

F300E ELECTRONIC AIR CLEANER 68-0240-1 20 Parts and Accessories Not Illustrated ELECTRICAL TROUBLESHOOTING WARNING Electric Shock Hazard.Can cause personal injury or equipment damage.The following procedures expose hazardous liveparts. Disconnect from power between checks andproceed carefully. These...

Page 21 - TROUBLE SHOOTING AIR CLEANERS WITH PERFORMANCE INDICATOR.

F300E ELECTRONIC AIR CLEANER 68-0240-1 21 TROUBLE SHOOTING AIR CLEANERS WITH PERFORMANCE INDICATOR. Fig. 28. Troubleshooting air cleaners. MAKE SURE ELECTRONIC CELLS ARE CLEAN, DRY, AND CORRECTLY INSTALLED. MAKE SURE PREFILTERS ARE IN CABINET SLOT FARTHEST FROM FURNACE OR AIR HANDLER. TURN ON ELECTR...

Page 24 - ULTRAVIOLET AIR TREATMENT SYSTEM; • Prevent mold spores from growing on your; IMPROVE YOUR INDOOR AIR WITH A COMPLETE; Whole House Air Quality System by Honeywell

Home and Building ControlHoneywell Limited-Honeywell Limitée35 Dynamic DriveScarborough, OntarioM1V 4Z9 68-0240-1 G.H. Rev. 9-00 Home and Building ControlHoneywell1985 Douglas Drive NorthGolden Valley, MN 55422 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. w...