Honeywell DALI64MODPSUS - Manuals

Page 2 - DALI64MODPSU-Installation Instructions; DETERMINE POSITION; HIGH SENSITIVITY; SECURITY; NOT

DALI64MODPSU-Installation Instructions 2 32350820-001 1. DETERMINE POSITION Only suitably qualified personnel should install this equipment Optimum Orientation The unit is more sensitive to movement when direction of travel is along the vertical and horizontal planes. To achieve optimal occupancy de...

Page 3 - DALI64MODPSU - Installation Instructions; PLAN DALI CABLE RUNS; DALI Topology; a) Prepare Mounting Location and Run Cables

DALI64MODPSU - Installation Instructions 3 32350820-001 2. PLAN DALI CABLE RUNS 3. REMOVE TERMINAL COVER 4. FIT FLUSH MOUNT VERSION DALI Topology DALI permits a free topology which means wiring can be done in daisy chain, star or a combination of these. Do not close the loop or ring connections. DAL...

Page 4 - FIT FLUSH MOUNT VERSION; b) Make Electrical Connections

DALI64MODPSU-Installation Instructions 4 32350820-001 4. FIT FLUSH MOUNT VERSION continued NOTE: Modbus cable must be routed separately from other cables. NOTE: If using cables larger than 3x1.5mm ² the outer sheath on the supply cable should only be removed after the sheathed cable has been clamp...

Page 5 - FIT SURFACE MOUNT VERSION; Drill 20mm hole; b) Attach Conduit Fittings & Cable Glands to Lower; The sensor may be mounted to any suitable surface, but is; c) Prepare Mounting Location and Run Cables; tab

DALI64MODPSU - Installation Instructions 5 32350820-001 5. FIT SURFACE MOUNT VERSION Drill 20mm hole NOTE: If a surface mount version has been ordered a flush mount version and a surface mount kit will be provided. 5a) Remove springs & Attach Shell 5b) Attach Conduit Fittings & Cable Glands...

Page 6 - OUT OF THE BOX BEHAVOUR; Not configured

DALI64MODPSU-Installation Instructions 6 32350820-001 6. SET TILT 7. MASK LENS 8. PERFORM WALK TEST 9. OUT OF THE BOX BEHAVOUR Some variants feature the ability to tilt the sensor (before fitting) by up to 10° in 2° increments, in order to extend the range in one direction up to 67% (at full tilt). ...

Page 7 - MAKE ELECTRICAL CONNECTIONS; red flashes every 2 seconds; Modbus Connections

DALI64MODPSU - Installation Instructions 7 32350820-001 10. CONFIGURATION 11. DIAGNOSICS 12. MAKE ELECTRICAL CONNECTIONS 13. MAINS SWITCH INPUT Once installed the unit must be configured using the Light Touch commissioning app to create the required lighting control installation, and configure a pas...

Page 9 - MAINS POWER CONNECTIONS; provide a guaranteed supply current of; DA DA; Warning: The DALI Bus is not classified as SELV. The

DALI64MODPSU - Installation Instructions 9 32350820-001 14. MAINS POWER CONNECTIONS 15. DALI BUS COMMECTIONS TERMINAL TYPE Pluggable rising cage clamp TERMINAL CAPACITY 1 x 0.5-2.5mm 2 solid or stranded RECOMMENDED CABLE 1.5-2.5mm 2 MAX CABLE LENGTH Refer to appropriate regulations OPERATING VOLTAGE...

Page 10 - Honeywell; LIGHTING CONTROLS; Important Notes; Do not dispose of with normal household waste. Do not burn; CAS NUMBER; Lead

DALI64MODPSU-Installation Instructions By using this Honey well literature, you agree that Honey well will have no liabilit y for any damages arising out of your use or modification to, the literature. You will defend and indemnif y Honey well, its af filiates and subsidiaries, from and against any ...

Honeywell DALI64MODPSUS - Manuals

Manuals:

Installation Manual Honeywell DALI64MODPSUS

Summary

Honeywell Manuals