Honeywell CT52A- Manuals

C O N TEN TS STEP PREPARATION 1 THERMOSTAT FEATURES 2 REMOVING OLD THERMOSTAT 3 WIRE AND MOUNT NEW THERMOSTAT 4 CHECK OUT THE THERMOSTAT 5 THERMOSTAT SETTING 6 TROUBLESHOOTING 7 RECALIBRATE THERMOMETER 8 LIMITED ONE-YEAR WARRANTY Hareywcii warrantE iiiis nrodiicl to tw Iroo ii&m dcFec!* in woikm...

I i SPIRIT LEVEL OR P L U M B BOB AMD LINE REMOVING OLD THERMOSTAT (See illustration under step 4 to help you recognize the heat anticipator.) Make a note □ Begin by turning off power to the heating/cooling system at the main fuse panel. Most residential systems have a separate switch box or circuit...

3^1 CT53 WIRE AND MOUNT THERMOSTAT (continued) □ Recheck for level position­ ing, and firmly tighten both mounting screws. □ If installing CT50A, CT51 A, or CT52A, make sure you have the current (anticipator setting) for your system. This is the number you wrote in the box in step 3. If you were una...