Honeywell CT1801- Manuals

7 69-0395—2 15 WALLPLATE. Provides mounting base and wiring connections for heating-onlythermostat. 16 SUBBASE. Provides mounting base, wiring connections and manual switchingcontrol for heating/cooling thermostat. M2421 15 AUTO OFF COOL HEAT ON FAN B O W Y R G M2411 16

8 69-0395—2 Reviewing Your Family Schedule Write the answers to the following questions in the spaces provided to determine the program that fits your family schedule. SUMMER WINTER What comfort temperature would you like to maintain? ______ ______ What energy savings temperature would you like to m...

9 69-0395—2 50 50 60 60 70 70 80 80 12 3 6 9 M8279 LOW TEMPERATURESETTING LEVER HIGH TEMPERATURESETTING LEVER Setting The Temperature For Heating: Set the left lever (blue mark) to the energy savings temperature you want when you aresleeping or your home is unoccupied. Set the right lever (red mark)...

10 69-0395—2 Setting Subbase Switches (if applicable) The subbase system switch controls system operation as follows: HEAT: Heating system is controlled by the thermostat. Cooling system is off. COOL: Cooling system is controlled by the thermostat. Heating system is off. OFF: Both the heating and co...

11 69-0395—2 Inserting Clock Batteries Power is supplied to the clock by two AAA alkaline batteries (included). Install batteries inthermostat as shown in Fig. 2. Once a year, orwhen batteries are dead, replace with two newAAA alkaline batteries. We recommendEnergizer ® batteries. The thermostat its...

12 69-0395—2 Setting The Clock Lift thermostat flip-up cover and you’ll find the 24-hour program dial, slotted in 10-minuteincrements. Adjust the clock to the current timeby moving the minute hand carefully in theclockwise direction. Do not reverse the minute hand. When time is correctly set, the Ti...

13 69-0395—2 Programming You can program your thermostat to automatically lower and raise the temperatureone or more times every 24 hours. Refer to the energy savings chart on the back cover for typical heating and coolingsavings with your new thermostat. Before setting your program: Lift thermostat...

14 69-0395—2 Two additional sets of pins are located in the program pin storage area. You can set upto six temperature changes with the pinssupplied. We recommend at least five hours foreach energy saving period. To change the pins or add a new energy savings period— • To insert a pin, push it strai...

16 69-0395—2 Temporarily changing the program You may temporarily raise or lower the temperature if you come home early, stay uplate, plan to be out for the evening, leave onvacation, etc. You can make a temporarychange one of two ways—move the programindex wheel or push the setting levers together....

17 69-0395—2 Pushing the setting levers together will hold a particular temperature until you change thelevers back. This method is recommended for along-term absence. • Simply push both levers to the tempera-ture you wish for system control. Thistemperature will stay in effect until youchange the l...

18 69-0395—2 Troubleshooting Your Honeywell thermostat requires little or no attention. Most problems can generally be traced to the following: 1 Not applicable on heating-only model. Problem Check Action No heat. — system switch. May be in OFF or COOL position. Move system switch to HEAT position. ...

19 69-0395—2 Troubleshooting (continued) 1 Not applicable on heating-only model. 1 (continued) Problem Check Action No heat (continued). — other. Contact a qualified service technician forassistance. Energy savingstemperature program 12hours off. — program dial for proper day or night phase. Turn cl...

21 69-0395—2 Troubleshooting (continued) If you have questions regarding your Honeywell Fuel Saver Thermostat please visit our web site at www.honeywell.com/yourhome, or call the customer information line at 1-800- 468-1502. Problem Check Action No cooling (continued). — other. Contact a qualified s...

23 69-0395—2 Thermometer Adjustment The thermometer has been accurately cali- brated at the factory and should only needadjustment if it has been dropped or mishandled. If the setpoint lever and the thermometer reading do not agree, follow the procedurebelow. • Remove thermostat cover and open thefl...

24 69-0395—2 Toll-free Consumer Service For all questions concerning this thermostat, please read and follow the instructions. If you have questions regarding your Honeywell Fuel Saver Thermostat please visit our web site atwww.honeywell.com/yourhome, or call the customer information line at 1-800-4...

25 69-0395—2 Limited One-Year Warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for aperiod of one (1) year from the date of purchase by the consumer If, at any time during the warranty period, the prod...

D.F. • Rev. 1-96 • ©Honeywell Inc. 1996 • Printed in U.S.A. • • Form Number 69-0395—2 Home and Building Control Home and Building Control Helping You Control Your World Honeywell Inc. Honeywell Limited—Honeywell Limitée 1985 Douglas Drive North 155 Gordon Baker Road Golden Valley, MN 55422 North Yor...

5 69-0394—3 AUTO OFF COOL HEAT ON FAN W Y G M2413 HEATINGRELAY ORVALVE COIL COOLINGCONTACTORCOIL FANRELAY L1(HOT) L2 POWER SUPPLY. PROVIDE DISCONNECT MEANS ANDOVERLOAD PROTECTION AS REQUIRED. 1 RC RH L1(HOT) L2 1 1 5-WIRE SYSTEM AUTO OFF COOL HEAT ON FAN W Y G M2414 HEATINGRELAY ORVALVE COIL COOLING...

69-0394—3 6 6 MOUNT THE THERMOSTAT Note the tabs on the top inside edge of the thermostatbase. These fit the slots molded into the top of the wallplate or subbase. Hang the thermostat base on the wallplate orsubbase as shown in illustration. Insert the two captive mounting screws located inthe botto...

7 69-0394—3 8 INSTALL CLOCK BATTERIES Power is supplied to the clock by two AAA alkalinebatteries (included). Install clock batteries in thermostat as shown. Once a year, or when batteries aredead, replace with two new AAA alkaline batteries. Werecommend Energizer ® batteries. Other types of batteri...

69-0394—3 8 69-0846 4 Helping You Control Your World Push both temperature control levers together atleast 5 ° F (3 ° C) above room temperature. The heat should come on. The fan will start when the furnace heatsup, Move both levers 5 ° F (3 ° C) below room temperature. The heat should shut off. Oper...