Honeywell 9007AX01 - Manuals

Universal Vehicle Power Supply Installation Instructions 7 About the Vehicle Battery Cable Follow these installation guidelines: • The power supply can draw up to 0.25 A, even with no load. So, for gas-powered vehicles, you also need to install an On/Off switch with a minimum of 15 A DC rating or an...

Universal Vehicle Power Supply Installation Instructions 9 9 Crimp a 3/8-inch terminal ring onto the braided ground wire. 10 Connect the 4-pin connector to the power supply. 11 Connect the battery cable to the vehicle battery. For more information, see the next section. How to Connect to the Vehicle...

10 Universal Vehicle Power Supply Installation Instructions 3 Slide the positive fuse link terminal ring from the input power cable onto positive battery clamp bolt. 4 Place another 3/8-inch washer onto the battery clamp. 5 Thread another 3/8-inch nut onto the battery clamp bolt and tighten the nut ...

Universal Vehicle Power Supply Installation Instructions 11 5 Put another 3/8-inch washer on the battery terminal post. 6 Slide the positive battery cable on the post. 7 Insert the post assembly (Steps 2 through 6) into the positive battery terminal. 8 Tighten the battery terminal post securely. 9 T...