Honeywell 8690I - Manuals

4 Install the Battery The device ships with a 3.7V, 3400 mAh battery  manufactured by Honeywell International Inc. Use only Honeywell battery model BAT-SCN07.

5 Replace the Battery Note: The battery should be replaced in an environment free from excessive dust or particulate to avoid an internal buildup of dust in the unit. When the battery is low, the 8690i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right a...

6 Right or Left Handed Operation To release the finger trigger, turn over the device. Press the two release buttons on either side of the trigger. Rotate the trigger and snap it into place to change the operation to the correct hand. 180º

10 Wrist Position When Scanning How to Scan a Bar Code The 8690i scanner has a view finder that projects a bright aim-ing pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read. ! Warning: Do not stare directly into the laser beam...

11 Connect the Device via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets. In this mode, the host will  continually attempt to connect with the device. If the device and th...

12 Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8690i pairs with a Bluetooth device using a HID keyboard. 1. Scan the Bluetooth HID Keyboard Connect bar code below. 2. Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guid...

13 Disconnect from the Host Once your device has been connected to a host, you must dis-connect it in order to communicate with a different device. Scan the Bluetooth Disconnect bar code to unlink the device from the currently linked host. Pair with an Android™ Mobile Device Tap and Pair You can pai...

15 Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computers, such as the Thor VM1 or VM2, or with Tecton mobile computers. 1. Scan the Bluetooth HID Keyboard Disconnect bar code below. 2. Use the 8690i to scan the EZPairing bar code that is either suppli...

16 Reset Custom Defaults If you want the custom default settings restored to your 8690i, scan the Activate Custom Defaults bar code below. This is the recommended default bar code for most users. It resets the 8690i to the custom default settings. If there are no custom defaults, it resets the 8690i...

17 Support To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com . User Documentation For the user guide and other documentation, go to www.honeywellaidc.com . Limited Warranty For warranty information, go to www...

8690i-ML-RS-01 Rev (a) Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible à www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto è disponibile sul sito www.honeywel...