Honeywell 85-3126 - Manuals

1 About your new thermostat Thermostat Features .................................. 2 Getting Started Quick Reference to Controls ..................... 3Quick Reference to Status Display ........... 4 Subscription Services Demand Control ......................................... 5Utility Usages ........

Operating Manual 2 UtilityPro TM Features Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control. Features • Provides Utility information messages. • Provides Utility bi...

UtilityPRO TM Series 3 SUN Press day(s) to set program schedule (see page 11) Displays the current tier rate Press to select fan operation Press to select system type Press to set program schedule Press to view messages Press to adjust temperature settings Press to view the subscribed service messag...

Operating Manual SCHED HOLD CLOCK SCREEN USAGE AM FAN AUTO SYSTEM HEAT Following Schedule Inside Set To 70 8:10 75 SUN VIEW TIER MEDIUM Recovery Current inside temperature Current day of week Temperature setting Program schedule ON (does not display when off) Fan setting Other display messages: • Co...

UtilityPRO TM Series 5 Demand Control This is an energy saving device. At times, thermostat operation may be temporarily adjusted by a small amount as outlined in your energy provider’s associated program literature. This is normal operation and is part of the program for which you have enrolled. Th...

UtilityPRO TM Series 7 Getting Started 7 View Messages Press on your screen. The message icon blinks when you receive a new message. The Message screen appears. Use the arrow buttons to view the messages. There can be a maximum of five messages. The message scrolls automatically if it has more than ...

Operating Manual 8 UtilityPro TM Features 8 Usage and Billing Press on your screen. The Usage screen appears. Navigate using the arrow buttons to view the billing consumption of water, gas, electricity, and so on*. In case there are no utility messages, the utility message icon does not appear. Pres...

UtilityPRO TM Series 9 Getting Started 9 UtilityPro ® Features 9 Fan Settings Press FAN to select fan operation, then press DONE. • ON: Fan is always on. • Auto: Fan runs only when the heating or cooling system is ON. • Circ: Fan runs randomly, about 35% of the time, not counting any run time with t...

10 10 SCHED HOLD CLOCK SCREEN USAGE WED AM Inside 6:01 70 SYSTEM HEAT FAN AUTO Following Schedule Set To 70 Press the SYSTEM button to select one of the following, then press DONE . • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. • Off: Heati...

UtilityPRO TM Series 11 1. Press SCHED , then EDIT . 2. Press day buttons to select day(s). There are three groups ( MON-FRI ), ( SAT ), and ( SUN ). 3. Press V or W to set Wake time for selected day(s). 4. Press V or W to set Heat and Cool temperature for this time period. 5. Press other time perio...

Operating Manual 12 Program Schedule Override (Temporary) Press V or W to immediately adjust the temperature. This temporarily overrides the temperature setting for the current time period. The new temperature is maintained only until the next programmed time period begins (see page 15). For example...

Operating Manual 14 To set the current time display, press CLOCK , then press V or W to adjust the time. Press and hold V or W to advance the time more quickly. Press DONE to save & exit (or press CANCEL to exit without changing the time). Note: The real-time clock should never require adjustmen...

UtilityPRO TM Series 15 Save Money by Setting Program Schedules It is easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. Set to the time you awaken and the temperature you wantduring the morning, unti...

Operating Manual 16 This thermostat is pre-set to use EnergyStar ® program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. Wake (6:00 am) Leave (8:00 am) Return (6:00 pm) Sleep (10:00 pm) Cool (Mon-Fri) Heat (Mon-Fri) Heat (Sat-Sun) Cool ...

UtilityPRO TM Series 17 Special Features Auto Changeover: When set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how long the furnace and air conditioner take to reach...

Operating Manual 18 Screen Lock To prevent tampering, the screen can be partially or fully locked. When partially locked, the screen displays SCREEN LOCKED for several seconds if a locked key is pressed. To unlock the screen, press any unlocked key while SCREEN LOCKED appears on the screen. When the...

UtilityPRO TM Series 19 Screen Cleaning Press SCREEN to go to the cleaning screen. Press OK to lock the screen for cleaning. The screen remains locked for 30 seconds so you can clean the screen without disturbing any settings. After 30 seconds, press CANCEL to resume normal operation, or press OK if...

Operating Manual 20 Advanced Functions 2. Press and hold blank center key until the display changes. 1. Press SYSTEM . Press V / W to select function Function Setting Press V / W to change setting SUN SYSTEM HEAT DONE 0120 20 DONE CANCEL AM 6:01 HEAT SUN 3. Change settings as required (see pages 21-...

UtilityPRO TM Series 21 Advanced Functions Year setting (first two digits) Function 0120 Press V / W to change the first two digits of the year: Options: 20 = Year 20 xx 21 = Year 21 xx Year setting (second two digits) Function 0130 Press V / W to change the last two digits of the year: Options: 01 ...

Operating Manual 22 Advanced Functions Program schedule ON/OFF Function 0160 Press V / W to turn the program schedule ON or OFF: Options: 1 5/2 [programmable weekdays and weekends]. 2 5/1/1 [weekdays, saturday, and sunday programmable]. Temperature format (°F/°C) Function 0320 Press V / W to set the...

UtilityPRO TM Series 23 Advanced Functions Program schedule periods Function 0540 Press V / W to set the number of program periods: Options: 4 4-4 program periods (WAKE, LEAVE, RETURN, SLEEP) 2 2-2 program periods (WAKE and SLEEP) 3 3-2 program periods (LEAVE and RETURN) Clock format Function 0640 P...

Operating Manual 24 If you have difficulty with your thermostat, please try the following. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is ON. • Make sure furnace door is c...

Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Toronto, Ontario M1V 4Z9 ® U.S. Registered Trademark.© 2007 Honeywell International Inc.US Patents pending85-3126 —1 Rev. M.S. 12-07 Automation and Control Systems Print...