Honeywell 62-2030-01 - Manuals

STRYKER VAV USER GUIDE 5 62-2030—01 RELATED TOPICS “1. About Stryker VAV” on page 2 3. CONFIGURING THE OUTPUTS Use this page to configure the outputs of the Stryker VAV device as well as the parameters used to control the outputs. To configure outputs: Flow Type Displays the control flow algorithm u...

STRYKER VAV USER GUIDE 62-2030—01 8 4. CONFIGURING THE INPUTS Use this page to configure the inputs used by the Stryker VAV device. This page is also used to configure the optional 10-point custom sensor curves. To set inputs: 4.1 Fields Step Action 1 From the left pane of the VAV Configuration Wiza...

STRYKER VAV USER GUIDE 62-2030—01 10 5. CONFIGURING THE SCHEDULE Use this page to configure the schedule events and holidays to be used by the Stryker VAV device. You can also configure occupancy override related parameters in this page. To set schedule: 5.1 Fields Table 6. Schedule Fields. RELATED ...

STRYKER VAV USER GUIDE 11 62-2030—01 6. CONFIGURING THE TEMPERATURE SETPOINTS Use this page to configure the temperature setpoints used by the Stryker VAV device and other parameters that affect temperature control. To configure temperature setpoints: 6.1 Fields Step Action 1 From the left pane of t...

STRYKER VAV USER GUIDE 13 62-2030—01 7. CONFIGURING THE FLOW SETPOINTS Use this page to configure flow setpoints for an Stryker VAV device and other parameters that affect flow/damper control. 7.1Procedure To set flow setpoints: 7.2 Fields NOTE: Flow setpoints are enabled only if Pressure Type is se...

STRYKER VAV USER GUIDE 15 62-2030—01 8. CONFIGURING THE CONTROL PARAMETERS Use this page to set control parameters for an Stryker VAV device that are used to control the damper. To set Control Parameters: 8.1 Fields NOTE: The Pressurize, Depressurize, Night Purge, Emergency Purge and Morning Warmup ...

STRYKER VAV USER GUIDE 62-2030—01 16 RELATED TOPICS “1. About Stryker VAV” on page 2 “4. Configuring the Inputs” on page 8 9. CONFIGURING THE PID Use this page to configure the PID parameters for both the heating and cooling loops in a Stryker VAV device. To set PID : 9.1 Fields Flow Tracking Offset...

STRYKER VAV USER GUIDE 17 62-2030—01 RELATED TOPICS “1. About Stryker VAV” on page 2 “2. Configuration” on page 4 10. CONFIGURING THE ACCESSORY LOOPS Use this page to configure accessory loops for Stryker VAV device on the LON network. To configure Accessory Loops: 10.1 Fields Heating Integral Time ...

STRYKER VAV USER GUIDE 19 62-2030—01 Related Topics “1. About Stryker VAV” on page 2 “2. Configuration” on page 4 “3. Configuring the Outputs” on page 5 “4. Configuring the Inputs” on page 8 “6. Configuring the Temperature Setpoints” on page 11 “8. Configuring the Control Parameters” on page 15 11. ...

STRYKER VAV USER GUIDE 25 62-2030—01 16. SENSOR CALIBRATION Use this page for sensor calibration in an Stryker VAV device on the LON network. Using Sensor Calibration feature, you can correct the input values to the controller. This action can be performed with the device in online mode. The control...