Honeywell 4500 - Manuals

4500 Thermostat Installation Instructions 2-2 You will not be able to adjust room temperature by phone when the 4500 isbypassed. There are several uses for the BYPASS switch function: • Allows the user to go back to their pre-existing thermostat at any time. • Allows heating/air conditioning service...

3-1 S E C T I O N 3 Installing the 4500 Thermostat • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • In This Section ♦ General ♦ Mounting and Installation ♦ Wiring Connections ♦ Step-by-Step Installation Instructions ♦ Setting the DIP Switch ♦ Setting the Fan Contro...

4500 Thermostat Installation Instructions 3-2 While installation of the 4500 is possible without the services of a HVACcontractor, some installers will prefer to have an HVAC contractor connectthe 4500 to the HVAC system and test its operation. This is recommended ifyou do not have HVAC experience. ...

4500 Thermostat Installation Instructions 3-6 5. Connect the tagged wires removed in step 4 from the HVAC system to theapplicable terminals of the 4500. Refer to the following table for properconnection information. Table 1 Lead from HVAC system Terminal on 4500 Fan (green) (G) 8 Cool (yellow) (Y) 7...

Section 3. Installing the 4500 Thermostat 3-7 9. Connect the 4500 to the 4286 phone module using the supplied keypadtype cable. The cable contains four wires of different colors which areconnected to the 4500 as indicated in the following table: Table 4 Wire from 4286 cable Terminal on 4500 Green 9 ...

4500 Thermostat Installation Instructions 3-8 10. Once the 4500 is mounted, you need to set its DIP switch and 3-pin fancontrol jumper. These procedures are described below. Setting the DIP Switch The 4500 includes a DIP switch for setting the address of the thermostat.The 4286 phone access module c...

Section 3. Installing the 4500 Thermostat 3-9 Setting the Fan Control Pins The three fan control pins in the center of the 4500 are used to control theoperation of the HVAC system’s fan. Using the jumper provided, you canselect whether or not the system’s fan should turn on with cooling andheating, ...

4-1 S E C T I O N 4 Programming the 4286 to Add 4500 Thermostat(s) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • In This Section ♦ General ♦ To Enter and Use the 4286 Programming Mode ♦ Programming Fields ♦ Step-by-Step Programming Instructions ♦ Thermostat Voic...

4500 Thermostat Installation Instructions 4-2 To Enter and Use the 4286 Programming Mode: 1. Pick up a premises touch tone phone connected to the 4286 handsetoutput. 2. Enter the 2 digit phone code on the phone keypad. If the 4286 isannouncing, wait until system status announcements have beencomplet...

Section 4. Programming the 4286 to Add Thermostat(s) 4-3 If The System Contains Addressable Keypad Non- Addressable Keypad Select “MUTE” (4286 #97 Mode) Comments Thermostat Speaker 01 - 30 (exclude 04)* 31 No Assign 4500 tosame partitionas keypad Thermostat No Speaker 01 - 30 (exclude 04)* 31 Yes As...

4500 Thermostat Installation Instructions 4-4 Field 02: Control Panel Type 1 = Vista-10 and Vista-10SE, Via-30P and Via-30PSE, 4140XMP (with voice upgrade EPROM) 2 = Vista-20, Vista-20HW and Vista-20SE [default] 4 = Vista-40, Vista-50P, Vista-100, and Vista-120. Field 03: Units of Temperature 0 = te...

Section 4. Programming the 4286 to Add Thermostat(s) 4-5 The first digit indicates the swing above the set point; the second digit indicates the swingbelow the set point, as indicated below: Temperature Span (Swing) “ABOVE “BELOW” Digit #1 Digit #2 1 = 0.0 deg. F. (0.0 deg. C.) 1 = 0.0 deg. F. ( 0.0...

Section 4. Programming the 4286 to Add Thermostat(s) 4-7 The first digit indicates the swing above the set point; the second digitindicates the swing below the set point, as indicated below: Temperature Span (Swing) “ABOVE “BELOW” Digit #1 Digit #2 1 = 0.0 deg. F. (0.0 deg. C.) 1 = 0.0 deg. F. ( 0.0...

Section 4. Programming the 4286 to Add Thermostat(s) 4-9 THERMOSTAT VOICE DESCRIPTORS VOCABULARY (4286 Phone Access Module Only) The following three digit codes are used to program thermostat descriptors into the 4286programming fields 07 thru 09 and fields 13 thru 15. Table 5 WORDINDEX WORD WORDIND...

5-1 S E C T I O N 5 Testing the 4500 With the 4286 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • In This Section ♦ General ♦ Step-by-Step Testing Procedure ♦ Setting the Premises thermostat ♦ Setting the 4500 Thermostat ♦ Menu Selections • • • • • • • • • • • • ...

4500 Thermostat Installation Instructions 5-2 5. Check the heat mode operation of the premises thermostat by varying itsset point and verifying that the heating system turns on and off. 6. If the 4500 thermostat will control an air conditioning system, set the4500 front panel slide switches to ACTIV...

Section 5. Testing the 4500 With the 4286 Phone Module 5-3 2. Obtain phone access from the phone module. Enter the 2-digit phonecode. Enter the 4-digit system code if prompted. 3. Press # 99 on the phone keypad after the complete status announcement. 4. The 4286 will announce: “Thermostat Mode.” The...

6-1 S E C T I O N 6 Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • In This Section ♦ General ♦ Troubleshooting Typical Thermostat Set-Up Problems • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • General Following...

4500 Thermostat Installation Instructions 6-2 4500 or premises thermostat fails to control the HVAC system. 1. Check set points in 4500 and premises thermostat to ensure they are setproperly. 2. If BYPASS of 4500 via its front panel switch causes existing thermostatto work properly, then problem is ...

A-1 S E C T I O N 7 Appendices • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • In This Section ♦ Federal Communications Commission (FCC) Part 15 Statement ♦ Ademco Limited Warranty ♦ Summary of Connections • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ...

4500 Thermostat Installation Instructions A-2 ADEMCO Limited Warranty Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions,subsidiaries and affiliates (“Seller”), 165 Eileen Way, Syosset, New York 11791, warrants itsproducts to be in conformance with its own plans...