Honeywell 11280S- Manuals

Page 2 - Operation; Position Sensing

61-86-03-13 Page 2 Features (continued) Health Monitoring Operation  • Control Signals – 0/4 to 20 mA, 0/1 to 5 Vdc, 0 to 10 Vdc, Digital remote setpoint (RS485 Modbus RTU protocol). • Output Signals – 0/4 to 20 mA, 0/1 to 5 Vdc and slidewire emulation. • Manual Operation – All 11280S series actuat...

Page 3 - Page 3; Local Display and Keypad; Figure 2 Local HMI (Display and Keypad)

61-86-03-13 Page 3 Local Display and Keypad Configuration and set-up is through the local HMI, consisting of a display and keypad interface (Figure 2). A high intensity 10-character LED display and simple pushbuttons provide quick access for actuator set up and status information. If relay outputs a...

Page 4 - Set Up/Configuration Parameters; Set Up Group; Selects digital

61-86-03-13 Page 4 Set Up/Configuration Parameters Configuration parameters are logically grouped and accessed using the local HMI. Actuator calibration is also accomplished through a simple procedure using the keypad. By pressing the SETUP button on the HMI, you can step through the set up groups t...

Page 5 - Specifications – General; Physical

61-86-03-13 Page 5 Set Up Group Configuration Parameter Selections/Settings SET LOCK  Enables lock out or access to selected set up group parameters and calibration values. LOCKID – Set Security Password LOCK – Lock Out READ STATUS  Displays failsafe condition and the results of various diagnostic...

Page 6 - Specifications – General,; Continued; Inverter rated, continuous duty, C face mounting

61-86-03-13 Page 6 Specifications – General, Continued Physical Model # Torque lb-ft (N_M) Output Shaft Size Shaft Key Size Output Shaft Length Maximum Overhang Load Handwheel Diameter Approx. Maximum Weight 11284S 425 (576) 2" (51 mm) 1/2" (13 mm) 5" (127 mm) 3700 lb. (1678 kg) 18" ...

Page 7 - Specifications – Actuator; Electrical

61-86-03-13 Page 7 Specifications – Actuator Electrical Input Signals Analog : 0/4 to 20 mA (With supplied 250 ohm shunt resistor for current range) 0/1 to 5 Vdc 0 to 10 Vdc Digital : Remote Setpoint via Modbus RTU (RS485) Input Impedance Input 0/4 to 20 mA 0/1 to 5 Vdc Input Impedance 250 ohms 10 K...

Page 8 - Pipe Linkage Kit; Figure 4 Pipe Linkage Kit; Actuator Crank Arm; Recommended Bolt Torque; Bolt Type; Clamp bolts

61-86-03-13 Page 8 Pipe Linkage Kit Pipe linkage kits are available from Honeywell and can be used for linkage lengths from 24 to 240 inches (61 to 610 cm). The kits include the mechanical pipe couplings, load rod end (left-hand thread), connecting rods and locking nuts. See Figure 4. The actuator r...

Page 9 - Page 9; External Transformers; Figure 6 Installation Drawing for External Transformer; Enclosure

61-86-03-13 Page 9 External Transformers 120 Vac (Single Phase) For customer applications requiring 120/240 Vac single phase operation, a step-up transformer is mounted in a separate enclosure (Model Selection Guide Table I, option 1). Figure 6 shows the installation for the transformer enclosure. 5...

Page 10 - Model Selection Guide; Instructions; KEY NUMBER - Electronics

61-86-03-13 Page 10 Model Selection Guide Reference 62-86-16-19 Instructions Select the desired key number. The arrow to the right marks the selection available.Make the desired selections from Tables I thru VIII using the column below the arrow.A dot ( ) denotes unrestricted availability. Key Numbe...

Page 11 - Model Selection Guide,; continued

61-86-03-13 Page 11 Model Selection Guide, continued 01128_ _ 4S5S6S8S TABLE V - SWITCH AND RELAY OUTPUTS (2 mech end-of-travel limits standard) Selection 9S 7S Auxiliary Switches None and 2 Aux. SPDT Switches2 Aux. + 2 Programmable Relay Outputs2 Programmable Relay Outputs4 Programmable Relay Outpu...

Page 14 - . Specifications may change without

61-86-03-13 Page 14 Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or ...