Honeywell 00003 - Manuals

5 31-00429 | Rev.10-20 INTERFACES Fig. 1. Smart IO 28 29 30 33 34 35 32 31 Table 8. Device Terminals Type Terminal Number Signal Description U IO 1 1 1 Input/Output signal for UIO 1 2 GND Signal ground for UIO 1 U IO 2 3 2 Input/Output signal for UIO 2 4 GND Signal ground for UIO 2 U IO 3 5 3 Input/...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 6 NOTES: — Ethernet Ports are for Future Use — USB-C Port is for Future Use. — Wi-Fi 5 GHz is for Future Use. — The GNDs for the UIO and DI are intercon - nected. — * Refer to Fig. 2 for AC power supply and Fig. 3 for DC power supply. C h an...

7 31-00429 | Rev.10-20 Activating Bluetooth and Resetting the device The Smart IO has a physical button that provides two functionalities, which are: — Activating Bluetooth — Resetting the Smart IO to factory default. To activate Bluetooth 1. Short press and release the button. The Bluetooth LED sta...

9 31-00429 | Rev.10-20 Communication Baud Rates NOTES: — Ethernet Ports are for Future Use — For frequencies, see “Wireless Connectivity” section on page 14. POWER SUPPLY WARNING Risk of electric shock or equipment damage! Transformers Honeywell Transformers A transformer can power the Smart IO. Whe...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 10 Example 1: Power Supply and wiring example Fig. 2. Power supply Vac NOTE: When a transformer powers more than one device, the polarity of these devices should be kept the same. 110/120/ 220/240VAC 24VAC F1

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 12 WIRING AND SET-UP General Safety Considerations • When connecting the Smart IO, VDE, National Electric Code (NEC) or equivalent, and any local regulations concerning grounding must be observed. • Only qualified electricians may carry out ...

13 31-00429 | Rev.10-20 Cable Specifications Power Supply Cable Specifications The length of the power supply cable includes the length of the cables to connected modules. NOTES: — Minimum 23 volts is required for the 20Vdc output. — Ethernet Ports are for Future Use. — Copper wire only for the term...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 14 WIRELESS CONNECTIVITY Connectivity Frequency Range NOTE: Wi-Fi 5 GHz is for Future Use. General Information • The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350Mhz Frequency range. Restri...

15 31-00429 | Rev.10-20 CONNECTION EXAMPLES Voltage Input (UIO)/Thermistor Input (UIO) Fig. 4. Voltage Input (UIO)/Thermistor Input (UIO) NOTE: The GNDs for the UIO and DI are interconnected. Voltage Input Mode (0 to 10V) Ensure correctpolarity n nn Resistance Input Mode External Power Supply Out n ...

19 31-00429 | Rev.10-20 Digital Inputs Connection Fig. 8. Digital Inputs Connection NOTE: The GNDs for the UIO and DI are interconnected. TTL /CMOS 0V 3.5mAWetting current voltfree opencollector logiccircuit Ensure correctpolarity n n nn n

Digital/Relay Outputs Fig. 9. Digital/Relay Outputs NOTE: Digital Outputs are changeover relays that provide a single pole Normally Open and Normally Closed contacts. C terminals are standalone and are not connected internally. LOAD n n n POWERSUPPLY LOAD n n n POWERSUPPLY Load connect to NO termina...

21 31-00429 | Rev.10-20 TROUBLESHOOTING WITH LEDS Troubleshooting with Main LED Table 20. Input/Output LEDs Case Main LED Behavior Meaning 1 LED is off Power OFF/Power Failure 2 Green-Yellow-Red cycling (Alternate Green, Yellow, Red for every 1 second) Factory default. Cycling until the device is co...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 22 Troubleshooting with Input/Output LEDs AI Channel DI Channel AO Channel Table 21. AI Channel (Modulating Input) LEDs Case AI Channel LED Behavior Meaning 1 OFF Unused 2 Solid Green, intensity changes based on input signal (Physical) Worki...

23 31-00429 | Rev.10-20 DO Channel Troubleshooting with Bluetooth LED Troubleshooting with Wi-Fi LED Table 24. DO Channel LEDs Case DO Channel LED Behavior Meaning 1 OFF OFF 2 Solid Green ON Table 25. Bluetooth LED Case Bluetooth LED Behavior Meaning 1 Off Bluetooth is Off. 2 Solid Green Bluetooth i...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 24 Troubleshooting with the Ethernet Interface LEDs NOTE: Ethernet Ports are for Future Use. Ethernet LEDs Table 27. Smart IO link and activity LEDs of Ethernet interfaces 1 and 2 Case LED Behavior Meaning Remedy 1 Green color LED is ON stea...

25 31-00429 | Rev.10-20 DIMENSIONS 57.5 mm (2.26”) 130.7 mm (5.15”) 105 mm (4.13”) 45 mm (1.77”) 110 mm (4.33”)

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO 31-00429 | Rev.10-20 26 APPENDIX: EARTH GROUNDING Smart IO and SELV In order to avoid distribution of noise or earth ground potential differences over networks or other connections, the Smart IO is designed to comply with SELV (Safety Extra Low Voltage). Further...

27 31-00429 | Rev.10-20 SMART IO PART NUMBERS Accessories Part Numbers These accessories are available by separate order. Remote Antenna Part Numbers Table 28. Smart IO Part Number Description IO-10MIXR-NWE Wireless Smart IO with North American conformance IO-10MIXR-WE Wireless Smart IO with Europea...

IO-10MIXR-WE / IO-10MIXR-NWE SMART IO ® U.S. Registered Trademark © 2020 Honeywell International Inc. 31-00429 | Rev.10-20 Honeywell Building Solutions Honeywell715 Peachtree Street NEAtlanta, GA 30308customer.honeywell.combuildingcontrols.honeywell.com TECHNICAL LITERATURE Table 31. Technical Liter...