Hobart LT1 ML-104239 - Manuals

– 6 – DISH TABLES Dish table end should be turned down and fitted over the lipof the dishwasher tank (Fig. 4). Use an NSF approved sealerbetween table and tank lip to prevent leaks. Fasten tables tothe tank lip; truss head screws (by others) are recommended. PLUMBING CONNECTIONS Fig. 4 WARNING: PLUM...

– 7 – ELECTRICAL CONNECTION WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THEAPPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCALELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THEDISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING O...

– 8 – CYCLE TIMER ADJUSTMENT The cycle timer, which regulates the dishwasher cycle, may require adjustment in order to suit localconditions. To gain access to the cycle timer, loosen the bottom screw on the access cover locatedon the right side of the control box and rotate the access cover up (Fig....

– 9 – OPERATION CAUTION: Items made of pewter, aluminum, and silver will be attacked by the sodiumhypochlorite sanitizing agent (liquid bleach) used in this machine and therefore should not bewashed in it. In addition to these detailed instructions, brief instructions for operation and cleaning can ...

– 10 – MACHINE PREPARATION Check to make sure that the pump intake strainer (Fig. 12), the drain pan strainer (Fig. 13), and thedrain tube (Fig. 17) are in place and that both strainers are free of debris. The pump intake strainermust drop completely to the bottom of the sump. THE DRAIN AND STRAINER...

– 12 – CLEANING THE DISHWASHER C l e a n t h e d i s h w a s h e r a f t e r e a c h w o r k i n gshift. Never use steel wool to clean warewashersurfaces. Use only products formulated to besafe on stainless steel. 1. Drain machine. Turn the P OWER switch Off. 2. Thoroughly cleanse and flush the dish...

– 14 – MAINTENANCE DELIMING WARNING: DELIMING SOLUTION MUST NOT COME IN CONTACT WITH BLEACH OR RINSESOLUTION CONTAINING BLEACH USED IN THIS MACHINE. MIXING MAY CAUSE HAZARDOUSGAS TO FORM. THIS ENTIRE PROCEDURE MUST BE FOLLOWED STEP-BY-STEP FOR SAFEAND SATISFACTORY RESULTS. The dishwasher should be d...

– 15 – 13. Run machine without loading dishware for two complete cycles to remove the chemical deliming agent. 14. Reconnect sanitizer, detergent, and rinse aid systems. 15. With the standpipes installed in their respective containers (red in detergent, white in sanitizer, blue in rinse aid), press ...

– 16 – TROUBLESHOOTING Symptoms that persist after possible causes have been checked may require service. SYMPTOMS POSSIBLE CAUSES No Machine Operation 1. Machine POWER switch in the OFF position. 2. Blown fuse or tripped circuit breaker at power supply.3. DELIME/NORMAL switch in the DELIME position...