Hobart 4246 - Manual

Hobart 4246 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 3 – Operation and Care of the; SAVE THESE INSTRUCTIONS; GENERAL; Pneumatic foot switch (can be added at any time)
Page 4 – INSTALLATION; U N P A C K I N G; To set up the unit, follow the order of assembly below:; LOCATION
Page 6 – OPERATION
Page 7 – ASSEMBLY AND USE; Do not use a plate with hole size smaller than; GRINDING PROCEDURE; MAINTENANCE; CLEANING; flange or use a dull screwdriver tip to pull the seal out.
Page 8 – TROUBLESHOOTING; Problem; SERVICE

Loading the manual

7 0 1 S . R I D G E A V E N U E

T R O Y , O H I O 4 5 3 7 4 - 0 0 0 1

937 332-3000

www.hobartcorp.com

FORM 34821 (Aug. 2002)

MODEL 4246
MIXER-GRINDER

4246S STANDARD (5 HP/1 HP)

ML-134216

4246HD HEAVY DUTY (7.5 HP/1 HP)

ML-134214

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Operation and Care of the; SAVE THESE INSTRUCTIONS; GENERAL; Pneumatic foot switch (can be added at any time)

– 3 – Operation and Care of the MODEL 4246 MIXER-GRINDER SAVE THESE INSTRUCTIONS GENERAL The Model 4246 Mixer-Grinder is designed to use #32-size knife and plate assemblies (not includedwith the unit). The Model 4246 is equipped with two drive systems. A 1-HP motor drives the heavy-duty steel mixing...

Page 4 - INSTALLATION; U N P A C K I N G; To set up the unit, follow the order of assembly below:; LOCATION

– 4 – INSTALLATION U N P A C K I N G Immediately after unpacking the mixer-grinder, check for possible shipping damage, If the mixer-grinder is found to be damaged, save the packaging material and contact the carrier within 15 days ofdelivery. Remove the packing box by loosening and removing the fou...

Page 6 - OPERATION

– 6 – CHECK MOTOR ROTATION With the grinder cylinder in place and the hopper lid closed, check the rotation. Standing in front ofmachine, push the MIX/GRIND START button. Check that the mixing arm and worm rotatecounterclockwise; press the STOP button to stop rotation. If the mixing arm and worm do ...