Hobart HM1600 - Manuals

Hobart HM1600 – Manual in PDF format online.

Manuals:

Manual

Manual Hobart HM1600

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

– 2 – IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions must be followed, including the following: WARNING: TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE, INJURY TO PERSONS,OR EXPOSURE TO EXCESSIVE MICROWAVE ENERGY: 1. Do not use metal utensils in this oven...

Page 3 - residue to accumulate on sealing surfaces.; CAUTION; throughout the oven if no food or water is present to absorb energy.; Do NOT use newspapers or paper bags for cooking.; hot food to the container.

– 3 – PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY 1. Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safetyinterlocks. 2. Do not place any ob...

Page 4 - TABLE OF CONTENTS

– 4 – TABLE OF CONTENTS GENERAL ............................................................................................................................................ 5 Radio Interference .............................................................................................................

Page 5 - Microwaves penetrate the food to about; Model HM1600 Microwave Oven

– 5 – INSTALLATION, OPERATION AND CARE OF MODEL HM1600 MICROWAVE OVEN GENERAL Microwave heat is generated inside the food rather than being conducted through the food as inconventional methods. Time is used to control the amount of heating that occurs. Microwave energy is absorbed in proportion to t...

Page 6 - INSTALLATION; UNPACKING; Remove the air filters.

– 6 – INSTALLATION UNPACKING Immediately after unpacking the microwave oven, check for possible shipping damage. If this oven isfound to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Removal of Protective Film A blue protective film is used to prevent sc...

Page 7 - • Reattach the voltage adjustment cover to the cabinet.

– 7 – ELECTRICAL CONNECTIONS Before making electrical connections, verify that the electrical service agrees with the specificationson the data plate on the lower right side as you face the oven. Grounding Instructions This appliance must be grounded electrically. In the event of an electrical short...

Page 8 - OPERATION

– 8 – OPERATION CONTROLS (FIG. 3) POWER LEVEL — Touch the pad to change to the next power level: HI MED LOW DEF HOLD.(HOLD does not apply any microwave heating; it allows time to pass so thatheat from a previous cooking stage can conduct through the product.) SHIFT — There are 16 memory pads: A1 – A...

Page 10 - Manual Single Stage Heating; Example: Heat for 1 minute 30 seconds at MEDIUM power.

– 10 – Manual Single Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power. • Open the door and place the food inside the oven. Close the door. Timerdisplay shows [ 0 ]. • Touch the POWER LEVEL pad until the indicator above MED is lit. • Turn the Dial Timer until 1:30 is displayed. • T...

Page 11 - Manual 2 or 3 Stage Heating; Touch the POWER LEVEL pad until the indicator above MED is lit.

– 11 – Manual 2 or 3 Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power (1st stage) and then heat for 2 minutes atDEFROST (2nd stage). • Open the door and place food inside the oven. Close the door. The Timerdisplay shows [ 0 ]. • Touch the POWER LEVEL pad until the indicator above ...

Page 12 - Programmed Heating; – If the oven is in Program Lock mode, heating begins without

– 12 – Programmed Heating Example: Microwave for 1 minute on HIGH power (1 stage heating). Memory Pad A – 5 was preset for 1 minute on HIGH power (see Factory Preset, page 9). • Open the door and place food inside the oven. Close the door. Timerdisplay shows [ 0 ]. • Press memory pad 5. Display show...

Page 13 - Programming Memory Pads; Example: To program memory pad A – 5 to DEFROST for 3 minutes.

– 13 – Programming Memory Pads Example: To program memory pad A – 5 to DEFROST for 3 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removalinstructions). Press the PROG button. If no PROG indication appears inthe display, Program Lock should be cancelled. Refer to ProgramUn...

Page 14 - Programming Memory Pads for 2 or 3 Stage Heating; If you want B – 5, press SHIFT and then press memory pad 5.

– 14 – Programming Memory Pads for 2 or 3 Stage Heating Example: Program memory pad A – 5 to DEFROST for 3 minutes and then to cook on HIGH powerlevel for 2 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removalinstructions). Press the PROG button. If no PROG indication app...

Page 15 - After 3 seconds the display goes blank.

– 15 – Program Lock This feature allows you to lock the memory pads’ power levels and heating times and allows one touchoperation of the oven (pressing START is not required). 1. Remove the right air filter. 2. Press and hold in the PROG LOCK button for 5 seconds until the display shows PROG P L . D...

Page 16 - List Memory

– 16 – List Memory This feature allows you to review all memory pad power levels and heating times for all three cookingstages. 1. Open the door and leave it open. 2. While pressing STOP/RESET, press and hold in the START pad for 2 seconds. 3. The display window shows all memory pads and power level...

Page 18 - To Read the Cycle Counter; The oven can display the total number of times it has operated.

– 18 – To Read the Cycle Counter The oven can display the total number of times it has operated. 1. Remove the air filters. 2. Open the door. 3. Close the door. Perform the next step within 60 seconds before the display goes blank. 4. While pressing BEEP, press PROG at the same time. The display sho...

Page 19 - Wash the air filters with a warm water and detergent solution.; MAINTENANCE; Replacing a Light Bulb; Close the cavity light cover.

– 19 – Cleaning WARNING: UNPLUG THE POWER CORD. Keep the inside of the oven clean. If pieces of food or spilled liquids stick to the oven walls, or betweenthe door seal and the door surface, they will absorb microwaves and may cause arcing or sparks. Wipeup all spills with a damp cloth. Kitchen dete...

Page 20 - TROUBLESHOOTING; Failure Codes

– 20 – TROUBLESHOOTING Failure Codes The HM1600 Microwave monitors its operation and displays a Failure Code when a problem occurs. CODE CAUSE WHAT TO DO • Unplug the oven to stop beep. • Wait for oven to cool down to reset operation. • If food ignites, do not open the door. If normal operation does...