Hilti 3554719 - Manuals - manualsarea.com

Page 2 - C US

1 This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado C US Printed: 14.09.2015 | Doc-Nr: PUB / 5246615 / 000 / 00

Page 8 - Safety

2 2 Safety 2.1 Warnings The purpose of warnings Warnings alert persons to hazards that occur when handling or using the product. Description of the key words used DANGER Draws attention to imminent danger that will lead to serious personal injury or fatality. WARNING Draws attention to a potentially...

Page 12 - Description

6 ▶ If the power tool detects that it is being operated beyond its limits or if the battery is fully discharged, it may happen that the accessory tool is no longer braked by the motor. Using and handling power tools with care ▶ Grinding discs must be stored and handled carefully in accordance with t...

Page 17 - Operation

11 5.7.3 Fitting an accessory tool secured with a ‚Kwik lock‘ nut 12 CAUTION Risk of breakage. Heavy wear (abrasion) may cause the ‚Kwik lock‘ nut to break. ▶ When working with the power tool, make sure that the ‚Kwik lock‘ nut doesn’t come into contact with the working surface. ▶ Do not use a damag...

Page 18 - Care, maintenance, transport and storage

12 6.2 Cutting ▶ When cutting, apply moderate feed pressure and do not tilt the power tool or, respectively, the cutting disc (hold at approx. 90° to the surface being cut). Note For best results when cutting profiles and square tube, start cutting at the smallest cross section. 6.3 Rough grinding C...

Page 19 - Troubleshooting

13 ▶ Never operate the angle grinder when the air vents are blocked. Clean the air vents carefully using a dry brush. Do not permit foreign objects to enter the interior of the power tool. ▶ Clean the outer surfaces of the power tool with a slightly damp cloth at regular intervals. Do not use a spra...

Page 21 - Hilti Corporation

*2106619* 2106619 Hilti Corporation LI-9494 Schaan Tel.: +423 / 234 21 11 Fax: +423 / 234 29 65 www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150911 Printed: 14.09.2015 | Doc-Nr: PUB / 5246615 / 000 / 00