Hilti 2146907 - Manuals - manualsarea.com

Page 4 - Safety

2 1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazard...

Page 12 - Use of this hood for working on metal is prohibited.; Use of this hood for working on metal is prohibited.; Status; Troubleshooting section.

10 3.6 DC-EX 125/5"C compact dust hood for cutting (accessory) When cutting mineral materials with diamond cutting discs, use the DC-EX 125/5" C compact hood. CAUTION Use of this hood for working on metal is prohibited. 3.7 DG-EX 125/5" dust hood for grinding (accessory) The grinding sys...

Page 14 - Before use; Due to the angle grinder starting unintentionally.

12 AG 500A22 Maximum disc diameter 5 in Maximum disc diameter 125 mm Weight 6.0 lb (2.7 kg) Thread diameter 5/8"-11 6 Before use 6.1 Inserting the battery CAUTION Risk of injury. Due to the angle grinder starting unintentionally. ▶ Before fitting the battery, check that the angle grinder is swi...

Page 16 - power tool are in alignment.; Fitting or removing the front cover

14 6.4.2 Adjusting the guard ▶ Press the guard release button and then rotate the guard until it engages in the desired position. 6.4.3 Removing the hood 1. Press the guard release button and then rotate the guard until the triangular marks on the guard and the power tool are in alignment. 2. Remove...

Page 19 - Operation

17 4. If the Kwik lock nut cannot be released by turning it by hand, use a pin wrench to turn the nut in a counterclockwise direction. Note Never use a pipe wrench! A pipe wrench could damage the Kwik lock nut. 5. Release the spindle lockbutton and remove the accessory tool. 6.7.5 Fitting a threaded...

Page 20 - Care and maintenance of cordless tools

18 1. Push the safety lock forward. ◁ The on/off switch is unlocked. 2. Press the on/off switch as far as it will go. ◁ The power tool’s motor runs at no-load speed. 7.5 Switching off (tool equipped with switch-on safety interlock) ▶ Release the on/off switch. ◁ The safety lock jumps automatically i...

Page 22 - 2 Manufacturer’s warranty

20 11 Disposal WARNING Risk of injury. Hazards presented by improper disposal. ▶ Improper disposal of the equipment may have the following consequences: The burning of plastic components generates toxic fumes which may present a health hazard. Batteries may explode if damaged or exposed to very high...